Pass Cisco 300-425 Exam With Practice Test Questions Dumps Bundle
2026 Valid 300-425 test answers & Cisco Exam PDF
Cisco 300-425 exam is a 90-minute test that evaluates your ability to design, configure, and troubleshoot complex enterprise wireless networks. 300-425 exam covers a wide range of topics, including wireless site surveys, wireless infrastructure design, WLAN high availability, and WLAN security implementation. It also focuses on advanced topics such as multicast over wireless, location-based services, and high-density wireless networks.
What is Salary of Cisco 300-425 exam
The CCENT certification is a good start in the Cisco certification track. The salary of CCENT level professionals would be 45,000 USD and the salary could reach 99,000 USD with senior professionals.
Cisco 300-425 exam is a highly regarded certification exam for professionals who want to validate their knowledge and skills in designing enterprise wireless networks. Passing 300-425 exam requires a deep understanding of wireless networking technologies, including the latest trends, protocols, and best practices. Candidates who pass the exam will receive the Cisco Certified Specialist - Enterprise Wireless Design certification, which is recognized globally as a mark of excellence in wireless networking.
NEW QUESTION # 130
What is the recommended cell overlap when designing a wireless network for Cisco Hyperlocation?
- A. 50%
- B. 20%
- C. 40%
- D. 30%
Answer: A
Explanation:
Cisco Hyperlocation requires a high degree of accuracy in client location tracking. A recommended cell overlap of 50% ensures that client devices are consistently within the range of multiple access points, which improves location accuracy and reliability. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.
NEW QUESTION # 131
During a wireless network design a customer requires wireless coverage on the perimeter of a building But also wants to minimize signal leakage from the wireless network Which antenna should be used to accomplish this design?
- A. omnidirectional
- B. patch
- C. monopole
- D. dipole
Answer: C
Explanation:
https://www.mwrf.com/technologies/passive-components/article/21844577/cshaped-slot-serves-uwb-antenna
NEW QUESTION # 132
An engineer at a global enterprise organization must ensure that a mesh deployment has the highest number of channels available to the backhaul, regardless of region deployed, which design meets this requirement?
- A. redundant controllers in the least restrictive regulatory domain
- B. one controller per continent
- C. one controller per country code
- D. redundant controllers in the most restrictive regulatory domain
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/country_codes.html
NEW QUESTION # 133
Based on a wireless network design, an engineer configured a primary and secondary controller for their APs.
A power interruption caused the primary Cisco WLC to go down, and, as expected, all APs joined the secondary controller. When the primary controller came back up, all the APs remained joined to the secondary controller. Which approach must the engineer take for the APs to move back to the primary?
- A. Set AP Fail over Priority to 4 on each AP.
- B. Set AP Fallback to Enabled on the primary controller.
- C. Set AP Fail over Priority to Critical globally.
- D. Set AP Fallback to Enabled on the secondary controller.
Answer: B
Explanation:
AP Fallback is a feature that allows APs to rejoin their primary controller after they have connected to a secondary controller due to a failure. By enabling AP Fallback on the primary controller, the APs will automatically rejoin it when it becomes available again after a power interruption. This ensures that APs return to their designated primary controller for normal operations.
NEW QUESTION # 134
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -78 to -65 dBm
- B. -85 to -65 dBm
- C. -85 to -67 dBm
- D. -72 to -67 dBm
Answer: C
NEW QUESTION # 135
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
- A. UDP port 16666
- B. TCP port 97
- C. UDP port 97
- D. IP protocol 97
Answer: A
Explanation:
Mobility tunnels between Cisco Wireless LAN Controllers (WLCs) use UDP port 16666 for control messages and UDP port 16667 for data traffic. If EPING is failing, it indicates that the necessary ports are not open. Allowing UDP port 16666 through the firewall would enable the control messages required for establishing the mobility tunnels.
NEW QUESTION # 136
The CIO of a company wants to start tracking inventory in the warehouse using RFID tags and their existing wireless network. The company hires a wireless engineer to ensure that their existing network supports this new initiative. Which tool in Cisco Prime helps the wireless engineer?
- A. Site Survey
- B. Planning Mode
- C. Location Readiness
- D. Map Editor
Answer: C
Explanation:
The Location Readiness tool in Cisco Prime analyzes your existing AP placement, RF coverage, and calibration to verify that the network can support location-based services (such as RFID asset tracking) without requiring a separate predictive survey or additional hardware.
NEW QUESTION # 137
A customer has this wireless design at its main branch:
- two Cisco Catalyst 9800 Series wireless controllers named WLC-Aand
WLC-B in an N+1 configuration
- the same WLANs with different Layer 3 interfaces for each WLC
- 100 APs in local mode
WLC-A manages the APs for a building named Building A. WLC-B manages the APs for a building named Building B. The customer wants to ensure that users can remain connected and retain their session state, including the IP address, when they move between buildings. How must this requirement be incorporated into the design?
- A. Create a mobility tunnel between WLC-A and WLC-B with the same group name.
- B. Implement AP groups for each building by using the same name on WLC-A and WLC-B.
- C. Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.
- D. Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.
Answer: A
Explanation:
On Cisco 9800 controllers, inter-WLC roaming and client-context synchronization (including IP address retention) requires configuring them in the same mobility domain. By assigning the same mobility group name and adding each other as mobility peers, the controllers automatically build the control- and data-plane tunnels needed for seamless Layer-3 roaming between buildings.
NEW QUESTION # 138
A network engineer is deploying Cisco 91301 APs on multiple Cisco Catalyst 9800-80 WLCs with Cisco Catalyst Center formerly DNA Center). The engineer must enable Cisco Al Analytics and location analytics to use the RRM features to automatically manage the WLC RF profiles. Which type of license must be used on Cisco Catalyst Center?
- A. Catalyst Essentials
- B. Catatyst Advantage
- C. Right-To-Use
- D. SNTC SmartNet
Answer: B
NEW QUESTION # 139
Why is 802.11a connectivity reduced in an X-ray room?
- A. X -rays within these rooms cause multipath issues.
- B. X-ray rooms exhibit increased signal attenuation.
- C. X-rays impact the 802,11a UNll-2 channels that cause access points to dynamically change channels.
- D. X-rays create significant non-Wi-Fi interference on the 802.11a band.
Answer: B
Explanation:
portable X-ray machines, sending high-resolution images, sometimes in real time, echography machines, and electrocardiography [ECG] machines). These devices may also use the same spectrum as Wi-Fi but with other protocols and, therefore, become sources of interference for your system.
NEW QUESTION # 140
During a client roaming event, which device is responsible for communicating the new Layer 2 EID mapping of a wireless supplicant to the fabric domain?
- A. CP2
- B. BN
- C. WLC
- D. CP1
Answer: C
Explanation:
During a client roaming event, the Wireless LAN Controller (WLC) is responsible for communicating the new Layer 2 Endpoint ID (EID) mapping of a wireless supplicant to the fabric domain. The WLC acts as a mobility orchestrator within the Cisco Digital Network Architecture (DNA) to ensure seamless roaming and connectivity. Reference: Designing Cisco Enterprise Wireless Networks (ENWLSD 300-425)
https://www.cisco.com/c/dam/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/deploy-guide/cisco-dna-center-sd-access-wl-dg.pdf
NEW QUESTION # 141
During a meeting to gather the requirements for a new Wi-Fi network design, the customer requests that to connect. Which affect does this have to the wireless network?
- A. lower throughput
- B. higher RF re ection
- C. 2.4 GHz signal congestion
- D. bigger channel width
Answer: D
NEW QUESTION # 142
A wireless engineer is designing a wireless network to support real time applications over wireless. Which IEEE protocol must the engineer enable on the WLC so that neighbor list radio management packets are sent to the wireless devices?
- A. 802.11w
- B. 802.11r
- C. 802.11k
- D. 802.11i
Answer: C
Explanation:
The IEEE 802.11k protocol is designed to enable radio resource measurement and neighbor list radio management packets. This protocol allows wireless devices to better understand their radio environment, which in turn supports real-time applications over wireless by enabling devices to make quicker and more informed decisions about roaming
NEW QUESTION # 143
An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?
- A. fast secure roaming
- B. QoS
- C. radio management
- D. interference mitigation
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/Enterprise-Mobility-8-5-Design-Guide/Enterprise_Mobility_8-5_Deployment_Guide.pdf
NEW QUESTION # 144
An engineer is designing a point-to-multipoint mesh network. Which two AP configurations must be completed for a site survey? (Choose two.)
- A. Tx power
- B. bridge group name
- C. Rx power
- D. mesh on 2.4 GHz band
- E. MAP hostnames
Answer: A,C
Explanation:
For a point-to-multipoint mesh network site survey, configuring the Rx power and Tx power is essential. Rx power will determine the sensitivity of the AP to incoming signals, which is crucial for understanding the reach of each mesh point. Tx power settings will influence the strength of the signals transmitted from the AP, affecting the network's overall coverage. References: Designing Cisco Enterprise Wireless Networks (ENWLSD 300-425)
NEW QUESTION # 145
A customer Wi-Fi deployment is experiencing the sticky client problem and must enable the optimized roaming feature. The wireless clients have valid security credentials for an SSID and can see an AP that offers that SSID to join. What must be configured to enhance roaming?
- A. disable 802.11k
- B. RSSI threshold
- C. enable data rates
- D. disable DFS
Answer: B
NEW QUESTION # 146
An engineer must perform a Layer 2 survey for a mining facility. Which type of antenna does the engineer use in the mine shaft?
- A. omnidirectional
- B. patch
- C. internal
- D. dipole
Answer: B
Explanation:
Mine shafts are long narrow corridors, you would get more use out of a patch antenna as you don't require signal in all directions and the gain increase to reach further down the shaft.
NEW QUESTION # 147
A network engineer is designing a new wireless network. The network needs to have these characteristics:
Which approach should be taken?
- A. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for all APs.
- B. Deploy APs near each other for 5 GHz coverage, and enable the 2.4 GHz radios for all Aps.
- C. Deploy APs near each other for 2.4 GHz coverage, and disable the 5 GHz radios for some APs.
- D. Deploy APs near each other for 5 GHz coverage, and disable the 2A GHz radios for some Aps.
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/86/b_Cisco_Wireless_LAN_Controller_Con
NEW QUESTION # 148
An enterprise network administrator is asked to set up an experimental WLAN for a collaboration project with a local service provider. The WLAN must be anchored to a WLC in the service provider data center using legacy mobility mode. After the configurations are completed on the WLCs and the firewalls in the path, the data path mobility tunnel is failing to come up. What should be performed by the administrator to debug the issue?
- A. Use the mapping command on the WLC.
- B. Establish a Telnet connection from a local PC to the firewall on port 97.
- C. Use the mapping command on the WLC.
- D. Establish a Telnet connection from a local PC to the firewall on port 16666.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/107458-wga-faq.html Community vote distribution
NEW QUESTION # 149
A rapidly expanding company has tasked their network engineer with wirelessly connecting a new cubicle area with Cisco workgroup bridges until the wired network is complete. Each of 42 new users has a computer and VoIP phone. How many APs for workgroup bridging must be ordered to keep cost at a minimum while connecting all devices?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation
So, each AP will have 25 clients. Minimum 4 APs are sufficient.
NEW QUESTION # 150
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that is used most by the company
- B. the client that is used least by the company
- C. the client that has the highest RF properties
- D. the client with the worst RF characteristics
Answer: D
Explanation:
When designing a wireless network for diverse clients, it's crucial to ensure that the network will be reliable for all users. Therefore, surveys should be conducted with the client that has the worst RF characteristics, as indicated in option D. This approach ensures that the network is designed to support even the weakest client, thereby providing a consistent experience for all users.
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_Access_Points
NEW QUESTION # 151
An architect configures a set of AirOS controllers to be in the same mobility group as the existing controllers. The implementation should facilitate inter-controller roaming for users in their new campus. After the configuration, the mobility tunnel is not operational for the data path in the network. Which two validations should be performed? (Choose two.)
- A. firewall port 16666
- B. mping
- C. rping
- D. firewall IP protocol 97
- E. eping
Answer: D,E
NEW QUESTION # 152
WLC SSO is set up between two WLCs in a service provider network serving public spaces. On WLC failover, it is noticed that only about half of the original client count is now showing on the secondary WLC, although it is currently showing the role as active.
Which design side case explains the issue?
- A. The secondary WLC platform does not support the required client count.
- B. SSO is not configured correctly.
- C. Some client sessions were in WebAuth-Req state before failover.
- D. The WLCs had not completed database sync before the primary failure.
Answer: C
NEW QUESTION # 153
A consulting engineer for an oil refinery is trying to extend network connectivity across various buildings via a mesh network. The mesh network has these requirements:
- The MAPs must be scalable and secure to operate in hazardous environments.
- The MAPs must extend the wired network infrastructure from RAP.
- The wired infrastructure must pass the native and the tagged VLANs from the remote side without defining them on the RAP or MAP Gigabit interfaces.
- MAPS must extend universal access to the remote building to allow clients to connect on the 2.4 GHz and 5 GHz bands in local mode.
- Cisco IW6300 APs must be used.
Which two mesh APs features must be used to meet the design requirements- (Choose two.)
- A. bridge link
- B. Ethernet bridging
- C. bridge data rates
- D. backhaul interface
- E. daisy chaining
Answer: A,B
Explanation:
Bridge Link (VLAN Transparent Mode): This feature, often referred to as VLAN Transparent mode in Cisco mesh configurations, addresses the requirement that the wired infrastructure must pass the native and tagged VLANs from the remote side without defining them on the RAP or MAP Gigabit interfaces. When the mesh access point is configured for VLAN Transparent mode, it functions like a Layer 2 wireless trunk cable. The MAP passes all VLAN tagged and untagged (native) frames received on its Ethernet port over the wireless backhaul to the RAP without interpreting or dropping the tags.
Ethernet Bridging: This feature addresses the requirement to extend the wired network infrastructure from RAP. Ethernet Bridging (or Client Access) must be enabled on the MAP's Ethernet port. This allows the MAP to act as a wireless bridge, enabling a switch or client device to be plugged into the MAP's Ethernet port. The traffic from this wired client is then sent back to the RAP (and thus the core wired network) over the wireless mesh link, effectively extending the LAN to the remote building.
NEW QUESTION # 154
A wireless engineer must design mobility between two buildings at a campus site. The engineer has one controller at each site. The engineer is investigating inter-controller CAPWAP data and control traffic. Which two ports must be open? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: B,E
Explanation:
For mobility between two buildings with one controller at each site, CAPWAP data and control traffic must be able to pass between controllers. CAPWAP control messages use UDP port 5246 while CAPWAP data messages use UDP port 5247; therefore, these ports must be open to allow inter-controller communication for seamless mobility. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice)
NEW QUESTION # 155
......
Top Cisco 300-425 Courses Online: https://www.dumpstorrent.com/300-425-exam-dumps-torrent.html
Free Cisco 300-425 Exam Questions and Answer from Training Expert DumpsTorrent: https://drive.google.com/open?id=1tH8ZUx5ninnUWnotoetcosObQYkIVDMr