Pass Your 300-425 Exam at the First Try with 100% Real Exam Questions
New Cisco 300-425 Dumps & Questions Updated on 2026
NEW QUESTION # 53
During a wireless site survey for a hospital, the client requires seamless roaming for VoWi-Fi handsets. Which design factor is most critical to ensure high-quality voice roaming?
- A. Ensuring 15?0% cell overlap at ?7 dBm
- B. Using omni-directional antennas for all APs
- C. Using high-gain directional antennas in hallways
- D. Deploying APs only on the 2.4 GHz band
Answer: B
NEW QUESTION # 54
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)
- A. Enable DTPC on the network.
- B. Configure RF profiles for each area type.
- C. Configure FlexConnect groups for each building.
- D. Configure AP groups for each area type.
- E. Configure WMM profiles for each building.
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-
10/configguide/b_cg810/configuring_ap_groups.html
NEW QUESTION # 55
A network consultant must create a wireless design with these characteristics:
* Provide coverage in a single contiguous space.
* Support dual-band wireless coverage.
* Use nine APs for full coverage in a 5 GHz band.
What must the engineer do to mitigate co-channel interference and maintain coverage in 2.4 GHz?
- A. Deactivate low data rates on the 2.4 GHz band.
- B. Disable 2.4 GHz radios on selective APs.
- C. Configure static channel and power settings of the 2.4 GHz radios.
- D. Adjust the TPC neighbor threshold value to -64 dBm on the 2.4 GHz band.
Answer: B
Explanation:
In a high-density environment where 5 GHz coverage is provided by nine APs, disabling the 2.4 GHz radios on some APs can reduce co-channel interference because the 2.4 GHz band has fewer non-overlapping channels. This approach helps maintain coverage while mitigating interference.
NEW QUESTION # 56
Which feature ensures seamless roaming between APs with no noticeable delay for voice clients?
- A. 802.11d
- B. 802.11k
- C. 802.11r Fast Transition
- D. Client load balancing
Answer: C
NEW QUESTION # 57
Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?
- A. GETVPN
- B. FlexVPN
- C. Cisco Easy VPN
- D. DMVPN
Answer: D
NEW QUESTION # 58
An engineer must speed up the reauthentication delays that are being experienced on the wireless infrastructure by deploying a key-caching mechanism. Which mechanism must be configured?
- A. FT
- B. GTK-randomization
- C. PEAP
- D. PMF
Answer: A
Explanation:
Fast Transition (FT), also known as IEEE 802.11r, is the key-caching mechanism that must be configured to speed up the reauthentication delays on the wireless infrastructure. FT allows for rapid re-authentication when roaming between access points, reducing the time required for re-establishing security keys and thus speeding up the overall process2.
References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice.
NEW QUESTION # 59
A customer is migrating from a legacy Cisco AireOS WLC to a new Cisco 9800 IOS XE WLC with Cisco 9100 APs. The new APs must associate to the Catalyst 9800 WLC, and wireless clients must seamlessly roam between the old and new WLCs even during SSO. The new Catalyst 9800 WLC deployment is configured to use SSO. Which command must be added to meet the requirements?
- A. C9800# wireless mobility mac-address <MAC>
- B. C9800# chassis redundancy ha-interface local-ip <local IP> <local IP subnet> remoteip
<remote IP> - C. C9800 (config) # ip default-gateway <IP>
- D. C9800 (config) # management gateway-failover enable
Answer: A
Explanation:
On Catalyst 9800-series controllers, you use the wireless mobility mac-address command to add an AireOS WLC as a mobility peer by its system MAC address. This ensures that APs can discover and associate with the new 9800 WLC and that client session context is exchanged for seamless roaming between the legacy and new controllers, even across an SSO failover.
NEW QUESTION # 60
An engineer Is trying to determine the most cost-effective way to deploy high availability for a campus enterprise wireless network that currently leverages three wireless LAN controllers. Which architecture should the engineer deploy?
- A. N+N solution without SSO
- B. N+N with SSO
- C. N+1 solution without SS0
- D. N+1 with SSO
Answer: D
Explanation:
For a cost-effective high availability deployment in a campus enterprise wireless network with three controllers, the N+1 architecture with Stateful Switch Over (SSO) is recommended. This architecture provides redundancy and allows for seamless failover without service interruption, ensuring that the network remains highly available without the need for a one-to-one controller redundancy, which would be less cost-effective
https://www.cisco.com/c/en/us/td/docs/wireless/technology/hi_avail/N1_High_Availability_Deployment_Guide/N1_HA_Overview.html?
NEW QUESTION # 61
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. high-density design model
- B. roaming design model
- C. location design model
- D. voice design model
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf
NEW QUESTION # 62
A customer has this wireless design at its main branch:
- two Cisco Catalyst 9800 Series wireless controllers named WLC-Aand
WLC-B in an N+1 configuration
- the same WLANs with different Layer 3 interfaces for each WLC
- 100 APs in local mode
WLC-A manages the APs for a building named Building A. WLC-B manages the APs for a building named Building B. The customer wants to ensure that users can remain connected and retain their session state, including the IP address, when they move between buildings. How must this requirement be incorporated into the design?
- A. Implement AP groups for each building by using the same name on WLC-A and WLC-B.
- B. Create a mobility tunnel between WLC-A and WLC-B with the same group name.
- C. Configure WLC-A and WLC-B in a high-availability cluster and set a mobility MAC address.
- D. Connect WLC-A and WLC-B by using the redundancy port to sync client sessions.
Answer: B
Explanation:
On Cisco 9800 controllers, inter-WLC roaming and client-context synchronization (including IP address retention) requires configuring them in the same mobility domain. By assigning the same mobility group name and adding each other as mobility peers, the controllers automatically build the control- and data-plane tunnels needed for seamless Layer-3 roaming between buildings.
NEW QUESTION # 63
An engineer has successfully configured high availability and SSO using two Cisco 5508 Wireless LAN Controllers. The engineer can access the Active Primary WLC, but the Secondary Standby WLC is not accessible. Which two methods allow access to the standby unit? (Choose two.)
- A. via the console connection
- B. SSH to the service port interface
- C. SSH to the management interface of the primary WLC
- D. SSH to the redundancy management interface of the primary WLC
- E. SSH to the virtual interface of the secondary WLC
Answer: A,B
Explanation:
NEW QUESTION # 64
An engineer is designing a wireless network to support hyperlocation in an environment that already has APs installed. During the survey, the engineer notices that the APs are pointing in different directions. What is the recommended way to align the APs to easily determine AP Azimuth, X-Y, and ceiling height information, and minimize confusion and user-entered errors?
- A. APs must be aligned pointing toward each other.
- B. APs must be aligned pointing toward the nearest wall.
- C. APs can be aligned all four ways.
- D. APs must be aligned in the same direction.
Answer: D
NEW QUESTION # 65
A wireless network consultant must assess an existing wireless LAN controller. Which section must the consultant check before replacing the old APs with APs that are IEEE 802.11ac-capable?
- A. controller PSU
- B. throughput capacity
- C. number of AP licenses
- D. software version
Answer: C
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION # 66
Which three pieces of equipment are needed to conduct a fully measured wireless survey? (Choose three.)
- A. tall tripod
- B. access point
- C. goggles
- D. ladder
- E. PoE battery
- F. spirit level
Answer: A,B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/81/design/guide/b_mesh_81/Site_Preparation_and_Planning.html
NEW QUESTION # 67
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
- A. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
- B. Ensure that channel bonding is enabled on the WLAN.
- C. Ensure that the client is dual-band capable.
- D. Ensure that the co-channel interference has not exceeded -85 dBm.
- E. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
- F. Ensure that the WLAN has 802.11a enabled.
Answer: C,E,F
Explanation:
https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch3_WLAN.pdf
NEW QUESTION # 68
A technician connects a Cisco Aironet 3700 Series access point to a switch and realizes that the AP is coming up with 3x3 MIMO. Which reason explains this behavior?
- A. The AP is getting power from a power injector.
- B. The switch is PoE+ capable.
- C. A redundant power supply is unavailable on the switch.
- D. The switch is 802.3af capable.
Answer: B
Explanation:
NEW QUESTION # 69
An engineer must configure the virtual IP address on multiple controllers in a mobility group. Which rule must the engineer follows to ensure proper roaming?
- A. Ensure that the DNS entry is tied to the virtual IP address of the WLC.
- B. Use a unique IP address for each WLC.
- C. Ensure that the DNS Host Name field is defined.
- D. Use the same IP address for each WLC.
Answer: A
Explanation:
NEW QUESTION # 70
Which three pieces of equipment are needed to conduct a fully measured wireless survey?
(Choose three.)
- A. tall tripod
- B. access point
- C. goggles
- D. ladder
- E. PoE battery
- F. spirit level
Answer: A,B,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/wireless/technology/mesh/81/design/guide/b_mesh_81/Site_Preparation_and_Planning.html
NEW QUESTION # 71
......
Cisco 300-425 exam is a highly respected certification exam for IT professionals who have experience in designing wireless networks. 300-425 exam is a challenging test of knowledge and skills, and passing the exam is an excellent way to validate your expertise in wireless networking. If you are interested in pursuing a career in wireless networking, then the Cisco 300-425 exam is an excellent certification to have on your resume.
Requirements for Cisco 300-425 Exam
The target audience for the Cisco 300-425 exam includes Consulting Systems Engineers, Wireless Engineers, Technical Solutions Architects, Wireless Design Engineers, and Systems Engineers. This test doesn’t have any official requirements. The applicants shouldn’t hold any working experience or earn any certificates before taking this exam. However, the potential candidates must have a thorough understanding of its topics before sitting for Cisco 300-425.
Cisco 300-425 Exam Certification Details:
| Sample Questions | Cisco 300-425 Sample Questions |
| Exam Price | $300 USD |
| Exam Registration | PEARSON VUE |
| Exam Code | 300-425 ENWLSD |
| Passing Score | Variable (750-850 / 1000 Approx.) |
| Recommended Training | Designing Cisco Enterprise Wireless Networks (ENWLSD) |
| Exam Name | Designing Cisco Enterprise Wireless Networks |
| Number of Questions | 55-65 |
Updated Exam 300-425 Dumps with New Questions: https://www.dumpstorrent.com/300-425-exam-dumps-torrent.html
Dumps to Pass your 300-425 Exam with 100% Real Questions and Answers: https://drive.google.com/open?id=1tH8ZUx5ninnUWnotoetcosObQYkIVDMr