Valid 300-425 Test Answers & Cisco 300-425 Exam PDF [Q11-Q28]

Share

Valid 300-425 Test Answers & Cisco 300-425 Exam PDF

Cisco 300-425 Certification Real 2021 Mock Exam


Key Exam Details

The Cisco 300-425 exam contains about 100 questions in total. The time limit is 90 minutes, which means that you have to deal with all the items during this period. The questions in this test are usually of various types. For example, there are drag and drop and multiple-choice questions.

The 300-425 certification test is known to be offered in English and Japanese. The cost that you should pay for the voucher is $300. This is what is paid within the borders of the United States. However, the price may vary. The applicants outside the USA should check and confirm the fee on the official website of the vendor.

To prepare for this Cisco exam, the learners can choose different study approaches. One of them is signing up for the instructor-led training course offered by Cisco on the official webpage. Designing Cisco Enterprise Wireless Networks is a paid course, which is created primarily for those individuals who already have some working experience in designing Cisco wireless networks.

 

NEW QUESTION 11
Drag and drop the characteristics from the left onto the correct functionalities on the right.

Answer:

Explanation:

Explanation

https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONS

 

NEW QUESTION 12
An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

  • A. One AP should be deployed per 3000 square feet.
  • B. The measurement should be done on the 2.4-GHz band.
  • C. The edge of the cell should be below 35 RSSI.
  • D. The edge of the cell should be -67 dBm.

Answer: D

Explanation:

 

NEW QUESTION 13
Which UDP port numbers are used for exchange mobility packets in an AireOS wireless deployment?

  • A. UDP 16668 for control plane, UDP 16667 for data plane
  • B. UDP 16666 for control plane, UDP 16667 for data plane
  • C. UDP 16667 for control plane, UDP 16666 for data plane
  • D. UDP 16666 for control plane, EoIP (IP protocol 97) for data plane

Answer: B

Explanation:

 

NEW QUESTION 14
Which protocol is used in a DMVPN network to map physical IP addresses to logical IP addresses?

  • A. NHRP
  • B. BGP
  • C. EIGRP
  • D. LLDP

Answer: A

Explanation:
Explanation

 

NEW QUESTION 15
A customer called with a requirement that internal clients must be on different subnets depending on the building they are in All access points are operating in local mode and will not be modified, and this is a single controller solution Which design approach creates the desired result?

  • A. Create FiexConnect groups, place the access points in. and set the correct VLAN to SSlD mapping based on location.
  • B. Create mobility anchors for the SSID. and on the controller under the internal SSID. create a foreign map to the desired VLAN based on location
  • C. Create an SSID. place it to the desired VLAN under WLANs. and configure 802.ix in ISE to assign the correct VLAN based on the SSlD from which the client is authenticating.
  • D. Create AP groups for each desired location, map the correct VLANs to the internal SSlD and add the access prints for that location

Answer: D

 

NEW QUESTION 16
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?

  • A. It is a CAPWAP tunnel with data path only.
  • B. It is an IPsec tunnel with control path and data path.
  • C. It is a CAPWAP tunnel with control path and data path.
  • D. It is an IPsec tunnel with control path only.

Answer: C

Explanation:

 

NEW QUESTION 17
Clustering Cisco WLCs into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco WLC. How many WLC and APs in an RF group can the controller software scale up to in WLC release 8.9 depending on the platform?

  • A. up to 20 WLCs and 3000 APs
  • B. up to 20 WLCs and 4000 APs
  • C. up to 20 WLCs and 1000 APs
  • D. up to 20 WLCs and 6000 APs

Answer: D

 

NEW QUESTION 18
A customer is concerned about mesh backhaul link security. Which level of encryption does the backhaul link use?

  • A. 3DES
  • B. WEP
  • C. hash
  • D. AES

Answer: D

Explanation:

 

NEW QUESTION 19
Which non-Wi-Fi interferer can be identified by Metageek Chanalyzer?

  • A. jammers
  • B. printers
  • C. PDAs
  • D. smartphones

Answer: A

Explanation:
Explanation
https://www.metageek.com/training/resources/wifi-and-non-wifi-interference

 

NEW QUESTION 20
A network engineer is configuring high availability on an access point. What is the maximum number of controllers that can be configured?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Explanation

So max 2 will be supported on an AP.

 

NEW QUESTION 21
An engineer must perform a pre-deployment site survey for a new building in a high-security area. The design must provide a primary signal RSSI of -65 dBm for the clients. Which two requirements complete This design? (Choose two)

  • A. Site access
  • B. AP model
  • C. Number of clients
  • D. WLC model
  • E. HAVC access

Answer: B,C

Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/116057-site-survey-guidel

 

NEW QUESTION 22
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gam antennas tor industrial, maintenance, or storage areas When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs Which strategy will reduce the negative impact of the design?

  • A. Resurvey and adjust the design
  • B. Deploy unsurveyed access points to the design
  • C. increase the Tx power on incorrectly surveyed access points
  • D. Deploy the specified access points per area type

Answer: A

 

NEW QUESTION 23
A wireless engineer is performing a post verification of a wireless network. Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)

  • A. The client device must have at least an -65 dBm RSSI.
  • B. The client device must have at least an -67 dBm RSSI.
  • C. The rate of retransmitted packets must be 20 percent or below.
  • D. The rate of retransmitted packets must be 15 percent or below.
  • E. The coverage area must have a noise floor that does not exceed -87 dBm.

Answer: B,D

 

NEW QUESTION 24
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

  • A. A cable in the RP port
  • B. SSO needs to be enabled
  • C. The primary Cisco WLC is already set as the secondary unit.
  • D. The secondary Cisco WLC needs a minimum of 50 base licenses

Answer: D

Explanation:

 

NEW QUESTION 25
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has
40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?

  • A. A cable in the RP port
  • B. SSO needs to be enabled
  • C. The primary Cisco WLC is already set as the secondary unit.
  • D. The secondary Cisco WLC needs a minimum of 50 base licenses

Answer: D

Explanation:

 

NEW QUESTION 26
A wireless engineer must optimize RF performance for multiple buildings with multiple types of construction and user density. Which two actions must be taken? (Choose two.)

  • A. Configure FlexConnect groups for each building.
  • B. Enable DTPC on the network.
  • C. Configure RF profiles for each area type.
  • D. Configure AP groups for each area type.
  • E. Configure WMM profiles for each building.

Answer: C,D

 

NEW QUESTION 27
What causes the most signal attenuation, based on the wireless design tools?

  • A. metal door
  • B. office window
  • C. cinder block wall
  • D. glass wall

Answer: A

Explanation:

 

NEW QUESTION 28
......

300-425 Exam Questions and Valid 300-425 Dumps PDF: https://www.dumpstorrent.com/300-425-exam-dumps-torrent.html

300-425 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1nu5f6S-k6pVzsj-1vYM6u-t7kW8V7xxF