Sep-2021 Latest DumpsTorrent 300-425 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new 300-425 Real Exam Questions!
NEW QUESTION 43
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that has the highest RF properties
- B. the client with the worst RF characteristics
- C. the client that is used most by the company
- D. the client that is used least by the company
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_A
NEW QUESTION 44
Refer to the exhibit.
What is the main reason why the Wi-Fi design engineer took a different approach than installing the APs in the offices, even though that installation provides better coverage?
- A. power supply considerations
- B. transmit power considerations
- C. antenna gain
- D. aesthetics
Answer: B
Explanation:
Explanation
https://www.cisco.com/en/US/docs/solutions/Enterprise/Mobility/emob30dg/RFDesign.html#wp1000551
NEW QUESTION 45
Refer to the exhibit.
Which two statements about Cisco Prime Infrastructure are true? (Choose two.)
- A. It shows the planning mode feature in Cisco Prime Infrastructure.
- B. It shows the map editor feature in Cisco Prime Infrastructure.
- C. It presents the recommended number of APs for the selected coverage area based on the selections made.
- D. Controllers must be synchronized with Cisco Prime Infrastructure for planning mode to work.
- E. Planning mode requires a special license in Cisco Prime Infrastructure.
Answer: A,C
Explanation:
NEW QUESTION 46
A network administrator of a global organization is collapsing all controllers to a single cluster located in central Europe. Which concern must be addressed?
- A. Centralized controllers cannot uniformly authenticate global users.
- B. Syslog must be configured to the time-zone of the NMS platform.
- C. Different RF policies per office are not available in this configuration.
- D. Some channels may not be available consistently across the organization.
Answer: B
Explanation:
Section: Wired and Wireless Infrastructure
NEW QUESTION 47
An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?
- A. WLC port groups
- B. interface groups
- C. RF groups
- D. AP groups
Answer: D
Explanation:
NEW QUESTION 48
An engineer performs a Layer 1 survey by using Metageek Chanatyzer only on the current operating channel. Which operating mode is configured for a Cisco CleanAir AP?
- A. sniffer
- B. monitor
- C. SE-connect
- D. local
Answer: D
Explanation:
https://www.metageek.com/training/lessons/chanalyzer-clean-air.html
NEW QUESTION 49
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -85 to -65 dBm
- B. -72 to -67 dBm
- C. -78 to -65 dBm
- D. -85 to -67 dBm
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructur minimum is -90 and maximum is -67 for IP phone
NEW QUESTION 50
A customer is running a guest WLAN with a foreign/export-anchor setup. There is one anchor WLC in the US and two in Europe. Anchor WLC priorities are used to prefer local anchors. During a routine network audit, it is discovered that a large number of guest client sessions in the US are anchored to the WLCs in Europe.
Which
reason explains this behavior?
- A. The US anchor WLC failed and recovered.
- B. The anchor WLC is in the same mobility group.
- C. The foreign WLC failed and recovered.
- D. The US anchor WLC is anchored to itself with a priority value of zero.
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise
NEW QUESTION 51
A customer has noticed that Client Band Select is enabled and no clients are utilizing the 5 GHz band. Which three parameters must be met to ensure that wireless clients use the 5 GHz band? (Choose three.)
- A. Ensure that the client is dual-band capable.
- B. Ensure that the co-channel interference has not exceeded -85 dBm.
- C. Ensure that the WLAN has 802.11a enabled.
- D. Ensure that channel bonding is enabled on the WLAN.
- E. Ensure that the client is receiving RSSI above the minimum band select RSSI threshold.
- F. Ensure that the UNII-2 extended channels are enabled on the 802.11a radios.
Answer: A,C,F
Explanation:

https://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Mobility/emob41dg/emob41dg-wrapper/ch3_WLAN.pdf
NEW QUESTION 52
A customer celled with a requirement that internal clients must be on different subnets depending on the building they are in, AH access points are operating in local mode and will not be modified, and this is a single controller solution. Which design approach creates the desired result?
- A. Create AP groups for each desired location, map the correct VLANs to the internal SSID, and add the access points for that location.
- B. Create mobility anchors for the SSID, and on the controller under the internal SSID. create a foreign map to the desired VLAN based on location.
- C. Create FlexConnecI groups, place the access points in. and sat the correct VLAN to SSID mapping based on location.
- D. Create an SSID, place it to the desired VLAN under WLANs, and configure 802 lx in ISE to assign the correct VLAN based on the SSID from which the client is authenticating.
Answer: A
NEW QUESTION 53
An engineer has configured guest anchoring for a newly created SSD however, the mobility tunnels are not up, and EPING is failing from the foreign WLC to the anchor WLC. Which traffic flow must be allowed at the firewall to enable the communication?
- A. IP protocol 97
- B. UDP port 97
- C. UDP port 16666
- D. TCP port 97
Answer: C
NEW QUESTION 54
Where must the APs be mounted when used in a high-density wireless network to provide 6 dB to 20 dB of attenuation to a cell?
- A. under the stage
- B. under the seat
- C. above the stage
- D. in the aisle
Answer: B
Explanation:
NEW QUESTION 55
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is an IPsec tunnel with control path and data path.
- B. It is a CAPWAP tunnel with control path and data path.
- C. It is an IPsec tunnel with control path only.
- D. It is a CAPWAP tunnel with data path only.
Answer: B
Explanation:
NEW QUESTION 56
An enterprise has moved most services to the cloud, including email applications and real-time communication. Which feature must be enabled on the wireless network to improve the user experience?
- A. Fast secure roaming
- B. QoS
- C. Radio management
- D. Interference mitigation
Answer: A
Explanation:
Explanation
https://community.cisco.com/t5/wireless-mobility-documents/what-is-cckm-and-how-does-it-affect-fast-an
NEW QUESTION 57
A customer has two Cisco 550B WLCs that manage all the access points in their network and provide N+1 redundancy and load balancing. The primary Cisco WLC has 60 licenses and the secondary Cisco WLC has 40. The customer wants to convert the N+1 model to an HA model and provide SSO. Configuration must be performed during a maintenance window. After performing all the configurations on both controllers, the config redundancy unit secondary command is issued on the secondary Cisco WLC and it fails. Which parameter needs to be in place to complete the configuration?
- A. The secondary Cisco WLC needs a minimum of 50 base licenses
- B. The primary Cisco WLC is already set as the secondary unit.
- C. A cable in the RP port
- D. SSO needs to be enabled
Answer: A
NEW QUESTION 58
An engineer is designing a wireless network that will support many different types of wireless clients. When conducting the survey, which client must be used to ensure a consistent experience for all of the wireless clients?
- A. the client that has the highest RF properties
- B. the client with the worst RF characteristics
- C. the client that is used most by the company
- D. the client that is used least by the company
Answer: B
Explanation:
Explanation
https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Conducting_Site_Surveys_with_MR_A
NEW QUESTION 59
What causes the most signal attenuation, based on the wireless design tools?
- A. glass wall
- B. metal door
- C. office window
- D. cinder block wall
Answer: B
Explanation:
NEW QUESTION 60
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is an IPsec tunnel with control path and data path.
- B. It is a CAPWAP tunnel with control path and data path.
- C. It is an IPsec tunnel with control path only.
- D. It is a CAPWAP tunnel with data path only.
Answer: B
Explanation:
NEW QUESTION 61
Which statement about creating a mobility group is true, excluding mobility anchors?
- A. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
- B. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
- C. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
- D. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
Answer: D
Explanation:
NEW QUESTION 62
Two cisco 5520 wireless LAN controllers are managing all access points throughout the network. The WLCs are in different locations to provide geographical redundancy a mobility group has been configured on both WLCs and has a UP status on both controllers. The Aps in location A are statically configured to use controller A as the primary and controller B as the secondary. If the WLC in location A goes offline. The Aps successfully join the WLC in location, but they do not fail over to their primary configured controller. Which configuration task fixes the issue?
- A. Enable AP fallback globally on the WLC
- B. Change the AP Failover Priority to critical.
- C. Configure the WLC in location A as primary using the CAPWAP AP Controller IP Address command on all the location A Access points.
- D. Use DHCP Option 43 and specify WLC in location A as primary.
Answer: C
NEW QUESTION 63
A wireless engineer is utilizing the voice readiness tool in Cisco Prime for a customer that wants to deploy Cisco IP phones. Which dBm range is the network inspected against?
- A. -85 to -65 dBm
- B. -72 to -67 dBm
- C. -78 to -65 dBm
- D. -85 to -67 dBm
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/34/user/guide/bk_CiscoPrimeInfrastructur minimum is -90 and maximum is -67 for IP phone
NEW QUESTION 64
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops. Which design methodology should the university implement in the auditorium?
- A. voice design model
- B. high-density design model
- C. roaming design model
- D. location design model
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guide.pdf
NEW QUESTION 65
......
Resources From:
- 2021 Latest DumpsTorrent 300-425 Exam Dumps (PDF & Exam Engine) Free Share: https://www.dumpstorrent.com/300-425-exam-dumps-torrent.html
- 2021 Latest DumpsTorrent 300-425 PDF and 300-425 Exam Dumps Free Share: https://drive.google.com/open?id=1A6F4rw_DwXhQkjNwtd9-S-YiHdv4wtFw
Free Resources from DumpsTorrent, We Devoted to Helping You 100% Pass All Exams!