[Oct-2021] Veeam VMCE_V10 Dumps – Reduce Your Chance of Failure in VMCE_V10 Exam
To help you achieve your ultimate goal, we suggest the actual Veeam VMCE_V10 dumps for your Veeam Certified Engineer (VMCE) V10 exam preparation to use as your guideline.
NEW QUESTION 20
Which of the following statements are true regarding backup copy jobs in Veeam Backup & Replication? (Choose two.)
- A. The backup copy job creates a forever forward incremental backup chain
- B. Retention settings maintain the desired number of restore points as well as offer optional GFS for archival purposes
- C. The backup copy job creates a single file with multiple restore points included within for archival purposes
- D. Backup copy jobs copy entire VBK, VIB, or VRB files from the source backup repository to the target backup repository
- E. During the backup copy job process, a VM snapshot is created for consistency
Answer: A,B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/about_backup_copy.html?ver=100
NEW QUESTION 21
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m.
and the administrator fails over the
replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 1 a.m. to 7 a.m.
- B. Data from 8 a.m. to 2 p.m.
- C. Data from 1 a.m. to 2 p.m.
- D. Data from 7 a.m. to 8 a.m.
Answer: C
NEW QUESTION 22
A backup administrator is planning to install Veeam ONE. Which data collection mode collects the most data per VM?
- A. For backup data only
- B. Optimized for advanced scalability deployment
- C. Optimized for typical deployment
- D. For vCenter data only
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/deployment/data_collection_modes.html?ver=100
NEW QUESTION 23
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- B. Use backup jobs to back up directly to tape; ship the tapes off site
- C. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 24
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup? (Choose three.)
- A. Backup proxy
- B. SureBackup job
- C. Application group
- D. Virtual lab
- E. Replication job
- F. Gateway Server
Answer: B,D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/recovery_verification_overview.html?v er=100
NEW QUESTION 25
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
- B. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- C. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- D. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
Answer: D
NEW QUESTION 26
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A standard virtual switch with uplink(s)
- B. A distributed virtual switch without uplink(s)
- C. A standard virtual switch without uplink(s)
- D. A distributed virtual switch with uplink(s)
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 27
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- B. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- C. If a VM within the replication job is not mapped, the job will fail
- D. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 28
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. Backup to tape
- B. Replication
- C. Backup copy
- D. File to tape
Answer: B
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION 29
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?
- A. Collect virtual environment configuration from Veeam Backup & Replication
- B. Analyze Veeam Backup & Replication log data and retrieve signature updates
- C. Collect Veeam Backup & Replication logs and execute remediation actions
- D. Track whether VMs and agents are properly protected and following the 3-2-1 rule
Answer: A
NEW QUESTION 30
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site.
When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company's disaster recovery site.
- A. Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO
= four hours - B. Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO = four hours - C. Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs:
RPO = 60 minutes, RTO = four hours - D. Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO
= 24 hours, RTO
= four hours
Answer: C
NEW QUESTION 31
A company has separate networks for management traffic and data traffic. All Veeam components are communicating over the management network. How would they define the data network for backup data transfers?
- A. Re-add all Veeam components involved in data transfer through the required interfaces
- B. Use the preferred network settings to switch to data network for the backup traffic
- C. Create a global network traffic rule, set appropriate source and target IP range
- D. Update routing tables on the components involved in data transfer
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/select_backup_network.html?ver=100
NEW QUESTION 32
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?
- A. Add the file share into the store infrastructure
- B. Add the file share into the managed servers
- C. Add the file share into the physical infrastructure
- D. Add the file share into the inventory
Answer: B
NEW QUESTION 33
A company has replicated their critical application VMs to a second data center in another region. Their key application includes two database VMs and three application VMs. For proper operation, the database VMs need to start before the application VMs. What needs to be configured in Veeam to prepare for a disaster recovery situation?
- A. Use a failover plan
- B. Use on-click failover
- C. Use a planned failover
- D. Use Instant VM Recovery
Answer: D
Explanation:
Reference: https://www.veeam.com/virtual-machine-backup-solution-free.html
NEW QUESTION 34
Which storage optimization option uses a block size of 512 KB?
- A. Local target (large blocks)
- B. WAN target
- C. LAN target
- D. Local target
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/compression_deduplication.html?ver=1
00
NEW QUESTION 35
A company is required to have a daily backup with a retention of at least six weeks. The backups are running every eight hours during the day. From the options provided, what backup job would you advise based on their SLA and best practices?
- A. Forever forward incremental backup, with a retention of 42 restore points, savings six weekly full backups
- B. Forever forward incremental backup, with a retention of 42 restore points
- C. Forever forward incremental backup, with default job settings enabled
- D. Forward incremental backup with weekly synthetic full backups and a retention of 42 days
Answer: C
NEW QUESTION 36
To suppress Veeam ONE alarms under specific conditions or when a specific event occurs, which of these options can be selected? (Choose three.)
- A. Veeam backup activity
- B. Storage snapshot deletion
- C. Snapshot creation
- D. Storage snapshot creation
- E. Snapshot deletion
- F. High CPU usage
Answer: A,C,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/one/alarms/alarm_suppression.html?ver=100
NEW QUESTION 37
A Veeam backup administrator, protecting all VMs in a VMware environment with backups and replicas, has been requested to run a multi-server application in an On-Demand Sandbox. The sandbox needs to stay powered on, uninterrupted, for 30 days while daily backups and replicas continue to run. How can this be done?
- A. Create an application group and leverage regular backup restore points as the source for the application group
- B. Create a (secondary) replication job for the required VMs that are not scheduled to run; make an application group and use these replicas as the source
- C. Create a (secondary) replication job for the required VMs that are not scheduled to run; create a SureBackup job and use these replicas as the source
- D. Create an application group and leverage regular replica restore points as the source for the application group
Answer: A
NEW QUESTION 38
Which of the following predefined tests can be performed during a SureBackup verification test on a backup file? (Choose three.)
- A. OS test
- B. Application test
- C. SAN check
- D. Heartbeat test
- E. Ping test
- F. Boot time
Answer: B,D,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/surebackup_tests.html?ver=100
NEW QUESTION 39
In the event a VMware VM configuration file (VMX) is missing and a restore is needed, what Veeam restore process is the best choice for this situation?
- A. Instant VM recovery
- B. VM file restore
- C. Virtual disk restore
- D. Instant disk recovery
Answer: B
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/vmfile_recovery.html?ver=100
NEW QUESTION 40
......
Accurate & Verified Answers As Seen in the Real Exam here: https://www.dumpstorrent.com/VMCE_V10-exam-dumps-torrent.html