2021 VMCE_V10 dumps review - Professional Quiz Study Materials [Q22-Q38]

Share

2021 VMCE_V10 dumps review - Professional Quiz Study Materials

VMCE_V10 Test Prep Training Practice Exam Questions Practice Tests

NEW QUESTION 22
A virtual machine in your environment has been hit by a virus. You need to restore the virtual machine as fast as possible. At the same time, you need to make sure that any dormant virus on the backed up virtual machine is detected. What restore method should you use when recovering to a new location?

  • A. Instant VM Recovery with "secure restore"
  • B. Instant VM Recovery with "staged restore"
  • C. SureBackup
  • D. Virtual disk restore

Answer: A

Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/em/em_disk_restore.html?ver=100

 

NEW QUESTION 23
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m.
and the administrator fails over the
replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?

  • A. Data from 7 a.m. to 8 a.m.
  • B. Data from 1 a.m. to 2 p.m.
  • C. Data from 8 a.m. to 2 p.m.
  • D. Data from 1 a.m. to 7 a.m.

Answer: B

 

NEW QUESTION 24
A backup administrator is deploying a Veeam ONE environment. They have chosen to use separate servers from their Veeam Backup & Replication environment. What benefit will they receive if they install the Veeam ONE Agent onto their backup server?

  • A. Track whether VMs and agents are properly protected and following the 3-2-1 rule
  • B. Collect Veeam Backup & Replication logs and execute remediation actions
  • C. Analyze Veeam Backup & Replication log data and retrieve signature updates
  • D. Collect virtual environment configuration from Veeam Backup & Replication

Answer: D

 

NEW QUESTION 25
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?

  • A. Aggregated data every five minutes
  • B. Data does not exist
  • C. Aggregated data every two hours
  • D. Raw data every 20 seconds

Answer: C

 

NEW QUESTION 26
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?

  • A. Configure a backup copy job in mirror mode, to a repository on the second site
  • B. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site
  • C. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
  • D. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site

Answer: B

 

NEW QUESTION 27
A company needs to recover a domain controller from a backup file they have on premises which was created by the Veeam Agent for Microsoft Windows. Which of the following would provide the fastest access to the domain controller?

  • A. Recover the domain controller to an AWS EC2 instance using the restore to Amazon EC2
  • B. Perform an Instant VM Recovery to recover the domain controller to a VM on their VMware host
  • C. Use the Veeam Explorer for Active Directory to recover the domain controller
  • D. Perform a bare metal recovery of their domain controller back to the original system

Answer: B

Explanation:
Reference: https://www.veeam.com/blog/how-to-recover-a-domain-controller-best- practices-for-ad- protection.html

 

NEW QUESTION 28
You use datastores as the source for your backup jobs. Some VM backups are consuming too much repository disk space. They have backup files created by multiple backup jobs.
What could be the reason? (Choose two.)

  • A. VM retention is set to do full backups more often than others in the job
  • B. VMware Storage DRS (Distributed Resource Scheduler) moved VMs to different datastores
  • C. Jobs are configured as per VM and these particular VM's need more fulls
  • D. The VMs were moved to different datastores manually
  • E. The VM is in a backup chain and trapped inside a single retention file

Answer: C,D

Explanation:
Explanation: Section: (none)

 

NEW QUESTION 29
When planning to back up files and folders from shared sources, that is the correct method to connect to the file share from the Veeam backup server?

  • A. Add the file share into the managed servers
  • B. Add the file share into the store infrastructure
  • C. Add the file share into the physical infrastructure
  • D. Add the file share into the inventory

Answer: A

 

NEW QUESTION 30
A financial company is looking for a new backup application. One of their main requirements is the ability to have quick access to their backup data. What features in Veeam Backup & Replication support the rapid availability of data, applications and VMs?
(Choose three.)

  • A. Restore to Amazon EC2
  • B. Instant VM disk recovery
  • C. Instant VM Recovery
  • D. Bare metal recovery
  • E. Microsoft SQL database, and Oracle database publishing
  • F. Full VM recovery without quick rollback

Answer: A,E,F

 

NEW QUESTION 31
What transport mode does the Linux backup proxy support?

  • A. Network
  • B. Automatic
  • C. Direct storage access
  • D. Virtual appliance

Answer: D

Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100

 

NEW QUESTION 32
Which storage optimization option uses a block size of 512 KB?

  • A. LAN target
  • B. Local target
  • C. Local target (large blocks)
  • D. WAN target

Answer: A

Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/compression_deduplication.html?ver=1
00

 

NEW QUESTION 33
When configuring a SureBackup job, what are some of the criteria for adding servers to an application group? (Choose two.)

  • A. VMs cannot be added to an application group twice
  • B. VMs must be running the same OS version
  • C. VMs must have at least one valid restore point
  • D. VM backups must reside on the same repository
  • E. VMs cannot be encrypted

Answer: A,C

Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/appgroup_vms_vm.html?ver=100

 

NEW QUESTION 34
A backup administrator has replicated a virtual machine between two Hyper-V hosts and now would like to automatically verify the recoverability of the replica. What would they need to do?

  • A. Create a virtual switch with no uplinks and start the virtual machine connected to the new switch
  • B. It is not supported to perform SureBackup replica testing for Hyper-V
  • C. Create a virtual lab and an application group; create a SureBackup for the replica job and run it once a day
  • D. Start the virtual machine manually using the universal application item recovery wizard

Answer: B

 

NEW QUESTION 35
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?

  • A. In the monitor client under the data protection view
  • B. In the monitor client under the infrastructure view
  • C. In the reporter portal in the dashboards tab, VM performance dashboard
  • D. In the reporter portal in the workspace tab, VM performance

Answer: A

Explanation:
Reference: https://www.veeam.com/blog/monitoring-vmware-hyperv-environment.html

 

NEW QUESTION 36
A backup administrator is creating a SureBackup environment up using Hyper-V as the hypervisor. Which virtual labs are available for Hyper-V? (Choose two.)

  • A. Advanced single-host (manual configuration)
  • B. Basic single-host (automatic configuration)
  • C. Advanced multi-host (automatic configuration)
  • D. Advanced multi-host (manual configuration)
  • E. Advanced single-host (automatic configuration)

Answer: B,C

Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/surebackup_basic_vlab.html?ver=100

 

NEW QUESTION 37
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?

  • A. Use backup jobs to back up directly to tape; ship the tapes off site
  • B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
  • C. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
  • D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository

Answer: D

 

NEW QUESTION 38
......

Exam Questions Answers Braindumps VMCE_V10 Exam Dumps PDF Questions: https://www.dumpstorrent.com/VMCE_V10-exam-dumps-torrent.html