[Nov-2026] 6V0-22.25 PDF Dumps Are Helpful To produce Your Dreams Correct QA's
New 6V0-22.25 exam Free Sample Questions to Practice
VMware 6V0-22.25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 76
Which metrics graph in the Virtual Service Analytics page will show the rate of 5xx errors?
- A. End-to-End Timing
- B. Requests
- C. HTTP Errors
- D. Conns
Answer: B
Explanation:
The Virtual Service Analytics page provides different graph categories for traffic, connection, timing, and error visibility. VMware Avi documentation states that the Requests chart shows the number of responses to requests per second and breaks down successful requests versus errors, including 4xx and 5xx errors. This makes the Requests graph the appropriate place to view the rate of HTTP 5xx errors for a Virtual Service. The Conns graph is focused on connection counts and rates, while End-to-End Timing shows timing components such as client RTT, server RTT, application response, and data transfer. "HTTP Errors" may sound plausible, but in the Avi Virtual Service Analytics graph naming described here, 5xx rate visibility is included under Requests.
NEW QUESTION # 77
An Avi Administrator has initiated an upgrade of a three-node Controller cluster. The administrator observes the process from the UI. What is the expected behavior of the Controller cluster during the upgrade sequence?
# Avi UI - Controller Upgrade Status
- Node 1 (Primary): Upgrading...
- Node 2 (Secondary): Pending
- Node 3 (Secondary): Pending
- A. The primary node is shut down, and a new primary is elected from the secondary nodes before the upgrade begins.
- B. The primary node takes a snapshot of all secondary nodes before applying the patch to itself.
- C. The secondary nodes are upgraded first, one at a time, followed by a failover and the upgrade of the original primary node.
- D. All three Controller nodes reboot simultaneously to install the new software version.
Answer: C
NEW QUESTION # 78
An application requires client requests to be distributed based on a value in the HTTP URI. For instance, all requests for /api/v1/us-east/... should go to pool-us-east and all requests for
/api/v1/us- west/... should go to pool-us-west. Which load balancing algorithm, when combined with a specific string from the URI, can achieve this deterministic routing?
- A. Fastest Response
- B. Round Robin
- C. Least Connections
- D. Consistent Hash
Answer: D
NEW QUESTION # 79
An operator selects "Average Values" and "Past 30 Minutes" for statistics type and timeframe on the Analytics tab of a Virtual Service and notices the graph data only updates every five minutes. What is the explanation for the observed behavior?
- A. The statistics type should have been set to "Current Values" rather than "Average Values"
- B. The timeframe should have been set to "Real Time" rather than "Past 30 Minutes"
- C. By default, the Real Time Metrics option is not enabled for the Virtual Service
- D. The GUI Refresh Interval has been increased to five minutes
Answer: C
Explanation:
Avi Load Balancer collects analytics metrics at different frequencies depending on whether real- time metrics are enabled. VMware Avi documentation explains that a newly created Virtual Service captures analytics aggressively for the first 30 minutes, but after that period the update frequency slows down unless real-time metrics are enabled. This behavior commonly appears as graph data updating every five minutes instead of continuously or near real time. The issue is not caused by the GUI refresh interval, and selecting "Average Values" is not the root cause. The timeframe of "Past 30 Minutes" can show recent data, but it does not automatically enable real-time collection. Therefore, the correct explanation is that, by default, the Real Time Metrics option is not enabled for the Virtual Service.
NEW QUESTION # 80
A DevOps Engineer is trying to optimize the performance of a high-transactional web application.
The application has many short-lived client connections, but the connections to the backend servers are expensive to establish. Which feature within the HTTP Application Profile can be used to reduce the load on the backend servers by reusing established server-side connections for multiple client requests?
- A. Caching
- B. Connection Multiplexing
- C. Server-Side SSL
- D. HTTP-to-HTTPS Redirect
Answer: B
NEW QUESTION # 81
An Avi Administrator is configuring a new Service Engine Group to host many small, non-critical virtual services. The primary goal is resource efficiency. The administrator wants to have a shared pool of standby Service Engines that can take over if any active SE fails. For example, if there are 20 active SEs, the administrator wants to have 2 standby SEs available for the entire group. Which HA mode for the Service Engine Group achieves this?
- A. Active/Active
- B. Cold Standby
- C. N+M
- D. Active/Standby
Answer: C
NEW QUESTION # 82
During the initial setup of an Avi Controller, an administrator is configuring the email/SMTP settings. The administrator enters the details for an internal SMTP server that does not require authentication. After saving the configuration, test alerts are not being received. The SMTP server is confirmed to be working correctly for other applications.
# Email/SMTP Configuration
SMTP Server: smtp.internal.lab
From Email: [email protected]
Authentication: Disabled
What is a common reason for this failure in the initial configuration context?
- A. The Service Engine group has not been created yet.
- B. The WAF profile is blocking outgoing SMTP traffic.
- C. A default gateway has not been configured for the Controller's management network.
- D. The Controller does not yet have a management IP address.
Answer: C
NEW QUESTION # 83
Which command is commonly used to access the Avi CLI from the controller?
- A. connect se
- B. ssh admin@controller
- C. login avi
- D. avi-shell
Answer: B
NEW QUESTION # 84
A vSphere administrator is trying to decide between the two primary high availability models in Avi. Which scenario would be a better fit for the N+M model over the Active/Active model?
- A. A critical application where any service interruption, however brief, must be avoided during a failure.
- B. A deployment with hundreds of small, low-traffic Virtual Services where providing a dedicated standby for each would be too costly.
- C. A single, extremely high-traffic microservice that needs to handle 50 Gbps of throughput.
- D. An environment where Service Engines need to be deployed on demand to handle unpredictable traffic spikes.
Answer: B
NEW QUESTION # 85
An organization has enabled Avi's real-time analytics for all their production Virtual Services. To reduce storage consumption and improve query performance, they want to automatically discard logs for routine, successful (HTTP 200) health monitor checks, while keeping all logs for failed checks and actual user traffic. Which combination of settings is required to achieve this? (Select all that apply.)
- A. In the Analytics Profile for the Virtual Service, disable logging for 'Non-Significant' traffic.
- B. In the Analytics Profile for the Virtual Service, configure 'Non-Significant Log Throttling'.
- C. In the Analytics Profile for the Virtual Service, enable 'Log all requests'.
- D. For the Health Monitor, disable the 'Log Successful Checks' option.
- E. For the Health Monitor, ensure 'Is Federated' is unchecked.
- F. For the Health Monitor, set the 'Health Monitor Type' to 'UDP'.
Answer: B,D
NEW QUESTION # 86
An administrator is creating a new Virtual Service to load balance traffic to a pool of web servers.
The administrator wants to use a specific FQDN (e.g., shop.example.com) for the service address instead of an IP address. How can this be achieved during the Virtual Service creation?
# Virtual Service Creation Wizard > Step 1
VS Name: vs-shop-prod
Service IP Address: [ ? ]
Application Domain Name: [ ? ]
- A. The FQDN should be entered in the 'Application Domain Name' field, and Avi will automatically handle the DNS registration.
- B. This is not possible; a Virtual Service must be created with an IP address first, then the FQDN can be added later.
- C. The administrator must first create a DNS record for the FQDN pointing to a free IP, then use that IP as the VIP.
- D. The FQDN must be entered into the 'Service IP Address' field.
Answer: A
NEW QUESTION # 87
When a new WAF Policy is attached to a Virtual Service, users report they are receiving a "403 Forbidden" error when trying to reach their application. Which configuration could likely cause this issue?
- A. The WAF Policy is in detection mode
- B. The WAF Policy has learning mode enabled
- C. The WAF Policy signatures are disabled
- D. The WAF Policy is in enforcement mode
Answer: D
Explanation:
Avi WAF Policies can operate in different modes. Detection mode observes and logs WAF rule matches without blocking user traffic, which makes it useful for tuning a WAF policy before enforcement.
Enforcement mode actively blocks requests that match blocking WAF rules or violate the configured policy.
Broadcom documentation for WAF mode describes Detection and Enforcement as the two supported WAF policy modes, and Avi HTTP error documentation states that WAF can return a 403 Request Forbidden response when running in enforcement mode. Disabled signatures would reduce WAF blocking, not cause it.
Learning mode helps generate recommendations and does not itself explain active blocking. Therefore, the likely cause of users receiving 403 Forbidden after attaching a new WAF Policy is that the policy is in enforcement mode.
NEW QUESTION # 88
A DevOps team is deploying a containerized microservices application on a Kubernetes cluster.
How does the Avi Vantage architecture with its distributed data plane support this modern application environment? (Select all that apply.)
- A. Each microservice gets its own lightweight, dedicated Service Engine for ingress traffic.
- B. The Avi Controller must be deployed as a pod inside the Kubernetes cluster.
- C. A single, large hardware load balancer is placed in front of the entire Kubernetes cluster.
- D. Service Engines can be deployed as pods directly within the Kubernetes cluster, running on the same nodes as the application pods.
- E. All east-west traffic between microservices must be sent out to a central hardware load balancer and back into the cluster.
- F. The Avi Kubernetes Operator (AKO) watches the Kubernetes API and automatically configures the distributed Service Engines.
Answer: D,F
NEW QUESTION # 89
Accessing an HTTPS Virtual Service displays an untrusted certificate error. Which option would not cause this issue?
- A. The default self-signed certificate was selected for the Virtual Service
- B. The certificate is signed by a valid internal CA, but it is not trusted by the client
- C. The certificate is an RSA certificate instead of an EC certificate
- D. The certificate has expired
Answer: C
Explanation:
An HTTPS client shows an untrusted certificate warning when the presented certificate cannot be validated by the client. Common causes include an expired certificate, a self-signed certificate, or a certificate signed by an internal certificate authority that the client does not trust. Avi documentation distinguishes between RSA and EC certificates as certificate algorithm types that can both be used by Virtual Services. A certificate being RSA instead of EC does not inherently make it untrusted. RSA certificates are still valid and supported when issued by a trusted CA, within their validity period, and matching the requested hostname. Therefore, the certificate algorithm alone is not a cause of an untrusted certificate error. The answer that would not cause the issue is B.
NEW QUESTION # 90
A Service Engine on which the Virtual Service is placed is experiencing a high level of memory utilization, but users of the application are not experiencing any issues. What impact, if any, will this have on the Health Score of the Virtual Service?
- A. The Performance score will be reduced
- B. The Security Penalty will be increased
- C. The Virtual Service's Health Score will not be impacted
- D. The Resource Penalty will be increased
Answer: D
Explanation:
Avi Load Balancer health score is a composite metric that considers several dimensions, including performance, resources, anomalies, and security. VMware Avi documentation for the Analytics Profile states that constrained resources increase the resource penalty score, and examples include CPU, memory, or disk utilization of a Service Engine or a server. In this scenario, users are not experiencing application issues, so the performance score may remain normal. However, the Service Engine hosting the Virtual Service has high memory utilization, which is explicitly a resource constraint. Because resource constraints are reflected as a resource penalty, the Virtual Service health score can be affected even when users have not yet noticed symptoms. Therefore, the correct impact is that the Resource Penalty will be increased.
NEW QUESTION # 91
A DevOps Engineer is designing a new environment and wants to ensure that the Virtual Services for the 'production' applications are physically isolated from the 'development' applications at the data plane level. Which Avi object is the primary mechanism for achieving this isolation?
- A. Service Engine Group
- B. Tenant
- C. Virtual Service
- D. Application Profile
Answer: A
NEW QUESTION # 92
Which component stores configuration and analytics data?
- A. Controller Cluster
- B. Pool
- C. Virtual Service
- D. Service Engine
Answer: A
NEW QUESTION # 93
A vSphere Administrator is managing the underlying infrastructure for an Avi deployment. The DevOps team reports that when they enable their WAF policy, the Service Engine VM's cpu.ready time in vCenter increases significantly, leading to poor application performance. What does this indicate about the Service Engine's capacity?
- A. The Service Engine does not have enough memory allocated.
- B. The Service Engine's network adapters are not configured with the VMXNET3 driver.
- C. The Service Engine VM has been allocated more vCPUs than it needs.
- D. The ESXi host running the Service Engine VM is oversubscribed and cannot schedule the VM's CPU requests in a timely manner.
Answer: D
NEW QUESTION # 94
After a successful upgrade of the Avi Controller cluster, the administrator navigates to the Infrastructure > Service Engine page to upgrade the data plane. The administrator sees two Service Engine Groups, 'SEG-PROD' and 'SEG-TEST'. The administrator wants to upgrade the test environment first to validate the new software version. What is the recommended upgrade method for the 'SEG-TEST' group to minimize disruption?
- A. Use the 'Upgrade' button for the entire 'SEG-TEST' group and select the 'Rolling' option.
- B. Delete all the SEs in 'SEG-TEST' and let the Controller redeploy them with the new version.
- C. Use the 'Upgrade' button for the entire 'SEG-TEST' group and select the 'Simultaneous' option.
- D. Manually SSH into each SE in the group and run the upgrade script.
Answer: A
NEW QUESTION # 95
How do the Virtual Service, Pool, and Virtual IP (VIP) objects work together to deliver an application?
- A. The Virtual IP is an object that contains a list of Pools, and it selects a Virtual Service based on the client's source IP.
- B. The Pool is configured with a VIP, and the Virtual Service provides the health monitoring for the servers in the Pool.
- C. The Virtual Service listens on the VIP, and upon receiving a client connection, it selects a server from its associated Pool to handle the request.
- D. The Pool listens on the VIP, and if a server is healthy, it forwards the connection to the Virtual Service for processing.
Answer: C
NEW QUESTION # 96
......
Cover 6V0-22.25 Exam Questions Make Sure You 100% Pass: https://www.dumpstorrent.com/6V0-22.25-exam-dumps-torrent.html
6V0-22.25 dumps Accurate Questions and Answers with Free: https://drive.google.com/open?id=17z82eK90bzk1i02uapX6IpEgAfvNTTqL