[Nov 02, 2023] Powerful 156-315.81 PDF Dumps for 156-315.81 Questions
Authentic 156-315.81 Dumps - Free PDF Questions to Pass
The Check Point Certified Security Expert R81 certification is a great way to demonstrate your expertise in Check Point technologies to potential employers and clients. It is also a valuable credential for IT professionals who want to advance their careers in the field of cybersecurity. With the growing demand for skilled cybersecurity professionals, earning this certification can open up new career opportunities and increase your earning potential.
The CCSE R81 certification is an important credential for security professionals who work with Check Point technologies. It demonstrates that they have the knowledge and skills to configure, manage, and troubleshoot Check Point Security Gateways and Management Software Blades systems. Check Point Certified Security Expert R81 certification is recognized by employers around the world and can help professionals advance their careers in the field of cybersecurity. With the growth of cyber threats and the increasing demand for skilled security professionals, the CCSE R81 certification is an essential qualification for anyone seeking to build a career in this field.
NEW QUESTION # 347
When synchronizing clusters, which of the following statements is FALSE?
- A. In the case of a failover, accounting information on the failed member may be lost despite a properly working synchronization.
- B. Client Authentication or Session Authentication connections through a cluster member will be lost if the cluster member fails.
- C. Only cluster members running on the same OS platform can be synchronized.
- D. The state of connections using resources is maintained in a Security Server, so their connections cannot be synchronized.
Answer: B
NEW QUESTION # 348
Kofi, the administrator of the ALPHA Corp network wishes to change the default Gaia WebUI Portal port number currently set on the default HTTPS port. Which CLISH commands are required to be able to change this TCP port?
- A. set web ssl-port <new port number>
- B. set Gaia-portal https-port <new port number>
- C. set web https-port <new port number>
- D. set Gaia-portal port <new port number>
Answer: A
Explanation:
Explanation
The CLISH command to change the default Gaia WebUI Portal port number is set web ssl-port <new port number>. This command will change the port that the WebUI listens on for HTTPS connections. After changing the port, you need to save the configuration with save config and verify that the change was applied with show web ssl-port. You also need to update the Main URL in the Platform Portal section of the gateway object in SmartConsole and install the policy.
NEW QUESTION # 349
What solution is Multi-queue intended to provide?
- A. Improve the efficiency of traffic handling by SecureXL SNDs
- B. Improve the efficiency of CoreXL Kernel Instances
- C. Reduce the confusion for traffic capturing in FW Monitor
- D. Reduce the performance of network interfaces
Answer: B
NEW QUESTION # 350
What command would show the API server status?
- A. cpm status
- B. api restart
- C. api status
- D. show api status
Answer: C
Explanation:
Explanation
The command that would show the API server status is api status. API stands for Application Programming Interface, and it is a web service that allows external applications to interact with the Check Point management server using standard methods such as HTTP(S) requests and JSON objects. API status is a command that shows the current status of the API server, such as whether it is enabled or disabled, running or stopped, listening on which port, using which certificate, etc. The other commands are either invalid or perform different functions.
NEW QUESTION # 351
Which command lists firewall chain?
- A. fw list chain
- B. fw chain module
- C. fwctl chain
- D. fw tab -t chainmod
Answer: C
Explanation:
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN/CP_R81_NextGenSecurityGateway_Guide/Topics-FWG/CLI/fw-ctl-chain.htm#:~:text=Shows%20the%20list%20of%20Firewall%20Chain%20Modules.
NEW QUESTION # 352
Which SmartEvent component is responsible to collect the logs from different Log Servers?
- A. SmartEvent Correlation Unit
- B. SmartEvent Database
- C. SmartEvent Server
- D. SmartEvent Collector
Answer: A
Explanation:
Explanation
https://sc1.checkpoint.com/documents/R80.40/WebAdminGuides/EN/CP_R80.40_LoggingAndMo nitoring_AdminGuide/Topics-LMG/SmartEvent-Architecture.htm?tocpath=Event%20Analysis%7C_____3
NEW QUESTION # 353
You have used the "set inactivity-timeout 120" command to prevent the session to be disconnected after 10 minutes of inactivity. However, the Web session is being disconnected after 10 minutes. Why?
- A. The number of minutes is correct. Probably, you have forgotten to save this setting with the "save config" command.
- B. Probably, you have forgotten to make sure that nobody is accessing the management server via the SmartConsole which locks the management database.
- C. The number specified is the amount of the idle timeout in seconds rather than in minutes. So you have to use the command "set inactivity-timeout 600" instead.
- D. The idle timeout for the web session is specified with the "set web session-timeout" command.
Answer: B
NEW QUESTION # 354
Vanessa is a Firewall administrator. She wants to test a backup of her company's production Firewall cluster Dallas_GW. She has a lab environment that is identical to her production environment. She decided to restore production backup via SmartConsole in lab environment.
Which details she need to fill in System Restore window before she can click OK button and test the backup?
- A. Server, SCP, Username, Password, Path, Comment, Member
- B. Server, Protocol, Username, Password, Path, Comment, All Members
- C. Server, TFTP, Username, Password, Path, Comment, All Members
- D. Server, Protocol, username Password, Path, Comment, Member
Answer: B
NEW QUESTION # 355
In order for changes made to policy to be enforced by a Security Gateway, what action must an administrator perform?
- A. Publish changes
- B. Install policy
- C. Save changes
- D. Install database
Answer: B
NEW QUESTION # 356
Which of the following processes pulls the application monitoring status from gateways?
- A. cpwd
- B. fwm
- C. cpd
- D. cpm
Answer: C
Explanation:
Explanation
The process that pulls the application monitoring status from gateways is 1. The cpd process is responsible for the communication between the Security Management Server and the Security Gateway2. It handles tasks such as policy installation, status reporting, logging, and synchronization2. The cpd process also monitors the application status of the Security Gateway, such as CPU, memory, disk space, and processes3. The cpd process sends this information to the Security Management Server, which displays it in SmartConsole and SmartView Monitor3.
References: How to troubleshoot issues with Check Point Application Control and URL Filtering blades - Check Point Software, Processes and Daemons in Gaia OS - Check Point Software, Monitoring Device Status
- Check Point Software
NEW QUESTION # 357
Which utility allows you to configure the DHCP service on Gaia from the command line?
- A. sysconfig
- B. cpconfig
- C. ifconfig
- D. dhcp_ofg
Answer: A
NEW QUESTION # 358
When a packet arrives at the gateway, the gateway checks it against the rules in the hop Policy Layer, sequentially from top to bottom, and enforces the first rule that matches a packet. Which of the following statements about the order of rule enforcement is true?
- A. If the Action is Accept, the gateway allows the packet to pass through the gateway.
- B. If the Action is Drop, the gateway continues to check rules in the next Policy Layer down.
- C. If the Action is Drop, the gateway applies the Implicit Clean-up Rule for that Policy Layer.
- D. If the Action is Accept, the gateway continues to check rules in the next Policy Layer down.
Answer: D
NEW QUESTION # 359
What is the port used for SmartConsole to connect to the Security Management Server?
- A. CPM port/TCP port 19009
- B. https port 4434/TCP
- C. CPMI port 18191/TCP
- D. SIC port 18191/TCP
Answer: C
NEW QUESTION # 360
Which of these statements describes the Check Point ThreatCloud?
- A. Prevents Cloud vulnerability exploits
- B. Blocks or limits usage of web applications
- C. Prevents or controls access to web sites based on category
- D. A worldwide collaborative security network
Answer: D
NEW QUESTION # 361
Which of the following is a new R81 Gateway feature that had not been available in R77.X and older?
- A. Sub Policies ae sets of rules that can be created and attached to specific rules. If the rule is matched, inspection will continue in the sub policy attached to it rather than in the next rule.
- B. The rule base can be built of layers, each containing a set of the security rules. Layers are inspected in the order in which they are defined, allowing control over the rule base flow and which security functionalities take precedence.
- C. Time object to a rule to make the rule active only during specified times.
- D. Limits the upload and download throughput for streaming media in the company to 1 Gbps.
Answer: A
NEW QUESTION # 362
......
Guaranteed Accomplishment with Newest Nov-2023 FREE: https://www.dumpstorrent.com/156-315.81-exam-dumps-torrent.html
Use Valid New Free 156-315.81 Exam Dumps & Answers: https://drive.google.com/open?id=1pDu0rrdRQvQfWw45oO2fMPJCeL-KrPCz