[Mar 22, 2022] 301 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions
Pass 301 Exam - Real Test Engine PDF with 49 Questions
NEW QUESTION 20
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- B. Only 2U BIG-IP Platform have an option of a second power supply.
- C. All current BIG-IP platform can perform hardware compression.
- D. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
- E. The 1600 hosts more ports than the 3900.
Answer: A,D
NEW QUESTION 21
When defining a load-balancing pool using the command line, if the load-balancing method is not specified, what is the result
- A. The load-balancing method of the previous pool would be used.
- B. The system would prompt the user for a load-balancing method.
- C. An error would be displayed since no load-balancing method was specified.
- D. The default load-balancing method would be used.
Answer: D
NEW QUESTION 22
Which three files/data items are included in a BIG-IP UCS backup file? (Choose three.)
- A. the BIG-IP administrative addresses
- B. the BIG-IP host name
- C. the BIG-IP license
- D. the BIG-IP default traps
- E. the BIG-IP log files
Answer: A,B,C
NEW QUESTION 23
How many events can be referenced in a given iRule?
- A. iRules can have up to event if one is client-side and one is server-side.
- B. iRules can have multiple events.
- C. iRules are limited to one event, but a virtual server could be associated with multiple rules.
- D. Exactly one.
Answer: B
NEW QUESTION 24
Given the configuration shown below, if a connection request arrived on the BIG-IP with a source address of 200.10.10.10:1050 and a destination of 150.10.10.75:80, what would the source IP address of the associated packet be when it arrived on the choosen member of the web_pool self
150.10.10.1 { netmask 255.255.255.0 unit I floating enable vlan external allow tcp https } self
10.10.1.1 { netmask 255.255.255.0 unit I floating enable vlan internal allow default } pool web_pool { member 10.10.1.11:80 member 10.10.1.12:80 member
10.10.1.13:80 }snatpool client_pool { member 10.10.1.100 member 150.10.10.15 } virtual VS_web { destination 150.10.10.10:80 ip protocol tcp snat automap pool web_pool }virtual VS_network{ destination 150.10.1 0.0:any mask
255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.1 0.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool } virtual VS_network { destination 150.10.10.0:any mask 255.255.255.0 snatpool client_pool ip protocol tcp pool web_pool }
- A. 200.10.10.I0D.200.10.10.10
- B. 10.10.1.I00B.10.10.1.100
- C. 150.10.10.15C.150.10.10.15
- D. 10.10.1.I10.10.1.1
Answer: B
NEW QUESTION 25
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
- B. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
- C. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
- D. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- E. The request will be dropped.
- F. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- G. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- H. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
Answer: G
NEW QUESTION 26
Which statement is true concerning packet filters?
- A. The order of filters does not affect which traffic is accepted or denied
- B. Filters cannot prevent the BIG_IP synching process from taking place.
- C. In addition to administrator-created filters, three always exists a "deny all" filter that processes traffic last.
- D. Filters cannot prevent access to the management port.
Answer: D
NEW QUESTION 27
Which are immediate results of entering the following command: b pool PoolA . { lb method predictive member 10.10.1 .1:80 member 10.10.1.2:80 }
- A. No changes will take place since the command is missing the monitor component for PoolA.
- B. Requests sent to this BIG-IP system with a destination port of 80 are load-balanced between the members of Pool
- C. a new pool is available for association with any iRule or virtual server.
- D. The /config/bigip.cinf file is updated to include a definition for the pool named PoolA.
Answer: C
NEW QUESTION 28
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. The context determines the values of commands that vary between client and server.
- B. The context has no impact on events.
- C. The context determines which events are available for iRule processing.
- D. The context determines which pools are available for load balancing.
Answer: A
NEW QUESTION 29
Which three parameters could be used to determine whether a connection request will have the source address translated as the request is processed? (Choose three.)
- A. the client's IP netmask
- B. the client's TCP port
- C. the client's browser's preferred language
- D. the client IP fragment offset
- E. the client's IP address
- F. the client's router's IP address
Answer: B,C,E
NEW QUESTION 30
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. lconfig/bigip.conf
- B. /etc/bigip_base.conf
- C. /config/bigip_base.conf
- D. /config/BigDB.dat
Answer: A
NEW QUESTION 31
What occurs when a save?command is issued?What occurs when a ? save?command is issued?
- A. The current configuration files are backed up.
- B. The current configuration files are verified for syntax, then the running configuration is installed in memory.
- C. The current configuration files are saved into an archive format.
- D. The current configuration files are loaded into memory.
Answer: A
NEW QUESTION 32
Which statement is true concerning SNATs using SNAT pools and SNATs using automap?
- A. SNAT s using automap translate source addresses randomly to any of the BIG-IP's floating self-IP addresses.
- B. SNAT s using a SNAT pool translate source addresses randomly to any of the addresses in the SNAT pool.
- C. A .SNAT pool can contain virtual server addresses.
- D. SNAT s using automap preferentially translate source addresses to non-floating self-IP addresses.
Answer: D
NEW QUESTION 33
A BIG-IP has the following objects configured: A SNAT pool with 2 members:
150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members:
10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?
- A. 150.10.33.33
- B. 10.10.1.33
- C. 150.10.30.30
- D. It could be any of the addresses of the members of the load-balancing pool.
- E. 200.10.10.10
- F. 10.10.1.10
Answer: B
NEW QUESTION 34
Which two processes are involved when BIG-IP systems issue traps? (Choose two.)
- A. alertd
- B. bigd
- C. syslog-ng
- D. smtpd
Answer: A,C
NEW QUESTION 35
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. any bytes within the initial client request packet
- B. an IP address
- C. any text string within a cookie
- D. the value in the tcp acknowledgement field
Answer: B,C
NEW QUESTION 36
A, steaming profile will do which of the following?
- A. Search and replace all occurrences of a specified string only is responses processed by a virtual server.
- B. Search and replace all occurrences of a specified string in requests and responses processed by a virtual server.
- C. Search and replace all occurrences of a specified string only in request processed by a virtual server.
- D. Search and replace the first occurrence of a specified of a specified string in either a request or response processed by a virtual server.
Answer: B
NEW QUESTION 37
When a virtual server has an HTTP profile with compression enabled, which traffic is compressed by the BIG-IP?
- A. all client-side traffic for that virtual server
- B. selected traffic from the pool member to the BIG-IP
- C. selected traffic from the BIG-IP to the client
- D. all sever-sid traffic for that cirtual srver
Answer: C
NEW QUESTION 38
......
Difficulty in writing 301a - LTM Technology Specialist
It's been observed that the 301a - LTM Technology Specialist is one of the toughest exam conducted by the F5. The candidate needs to have dedicationa and make continued effort in right direction. Proper study plan like F5 301 exam dumps and preparation for the exam would help you to get through with this exam.
In your study and practice plan you should choose the best F5 Certified Solutions Architect F5 301 exam dumps pdf offered by DumpsTorrent for real exam questions practice. There are many websites that are offering the latest 301a - LTM Technology Specialist questions and answers but these questions are not verified by certified experts and that's why many are failed in their just first attempt. DumpsTorrent is the best platform which provides the candidate with the necessary F5 Certified questions that will help him to pass the 301a - LTM Technology Specialist on the first time.
Get New 301 Certification Practice Test Questions Exam Dumps: https://www.dumpstorrent.com/301-exam-dumps-torrent.html