[Jan-2022] Download Real ISQI CTFL-AcT Exam Dumps Test Engine Exam Questions
New CTFL-AcT exam dumps Use Updated ISQI Exam
NEW QUESTION 16
Which one of the following statements regarding performance testing is MOST correct?
- A. The performance of the system is measured in a context that reflects, as far as possible, representative operating conditions.
- B. Performance testing aims to determine a system's robustness against malicious attacks.
- C. The performance test results serve to determine hardware and software performance requirements.
- D. Depending on the model used to simulate the workload, performance tests are called load, stress or endurance / stability tests.
Answer: A
NEW QUESTION 17
Which of the following statements corresponds BEST to a UX requirement analysis activity?
- A. Environmental conditions such as light conditions are obtained from a task analysis.
- B. Personas are used to analyze products or solutions from competitors.
- C. Security requirements are derived from usage scenarios.
- D. User profiles are used to determine different levels of business knowledge.
Answer: D
NEW QUESTION 18
Given the following attributes:
i.commercializability
ii.functional suitability
iii.viability
iv.reliability
v.security
vi.cognitive ability
vii.maintainability
Which one of the following answers contains quality attributes that are MOST relevant for acceptance testing?
- A. ii, v and vi
- B. i, ii and vi
- C. iii, iv and v
- D. ii, v and vii
Answer: B
NEW QUESTION 19
Which one of the following statements regarding ATDD / BDD is true?
- A. Behavior-Driven Development (BDD. considers acceptance test design as an activity to be handled by the test team after requirements have been finalized.
- B. In both Acceptance-Test Driven Development (ATDD. and Behavior-Driven Development (BDD., test cases provide examples of product use.
- C. In both Acceptance-Test Driven Development (ATDD. and Behavior-Driven Development (BDD., acceptance test cases are written by a test automation engineer as test automation code.
- D. In Acceptance-Test Driven Development (ATDD., test cases are written prior to the acceptance criteria.
Answer: B
NEW QUESTION 20
Which one of the following statements regarding ATDD / BDD is true?
- A. Behavior-Driven Development (BDD. considers acceptance test design as an activity to be handled by the test team after requirements have been finalized.
- B. In both Acceptance-Test Driven Development (ATD and Behavior-Driven Development (BD, acceptance test cases are written by a test automation engineer as test automation code.
- C. In both Acceptance-Test Driven Development (ATDD. and Behavior-Driven Development (BDD., test cases provide examples of product use.
- D. In Acceptance-Test Driven Development (ATDD., test cases are written prior to the acceptance criteria.
Answer: C
NEW QUESTION 21
What is considered as good practice regarding business process modeling?
- A. Business analysts should finalize their process models before showing them to acceptance testers.
- B. Keeping all model element in one diagram considerably improves the readability of BMPN models.
- C. Links to requirements or risks should be well separated from the workflow description.
- D. BPMN diagrams and DMN tables should include information such as traceability to user stories.
Answer: D
NEW QUESTION 22
Which one of the following statements describes correctly how acceptance testing may be augmented with other test techniques or approaches?
- A. In a risk-based testing approach, acceptance criteria are derived from the tester's experience and intuition.
- B. In a black-box testing approach, acceptance test scenarios follow the implemented sequence of function calls in the code.
- C. In a priority-based testing approach, prioritization of acceptance tests depends on identified product risks.
- D. In a model-based testing approach, acceptance tests are generated from graphical or textual models.
Answer: D
NEW QUESTION 23
Which one of the following statements defines beta testing BEST?
- A. During beta testing, genuine users define the acceptance criteria for various realistic configurations.
- B. Beta testing is performed by developers at the customer's location.
- C. Beta testers discover defects in the product that escaped during the development process.
- D. Beta testing takes place early in the development process to acquire feedback from the market.
Answer: C
NEW QUESTION 24
Which of the following is the BEST example of a Gherkin-style test for a web-based banking application?
- A. GIVEN I have $5000 on my personal account X WHEN I have $600 on my personal account Y THEN I have $5600 in total on my personal accounts X and Y
- B. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I transfer $1000 from X to Y THEN I should have balance $4000 on my personal account X AND I should have balance $1200 on my personal account Y
- C. GIVEN I have $5000 on my personal account X AND I have $200 on my personal account Y WHEN I click 'Make transfer' button AND I enter '3000' into 'Amount' field AND I enter 'X' into 'From which account' field AND I enter 'Y' into 'To which account' field AND I click 'Confirm transaction' button THEN I should have balance $2000 on my personal account X AND I should have balance $3200 on my personal account Y
- D. GIVEN I have $5000 on my personal account X and $600 on my personal account Y WHEN I transfer
$500 from Y to X
THEN I should have balance $4500 on X and balance $1100 on Y
Answer: B
NEW QUESTION 25
Which one of the following sentences describes BEST a major advantage when business analysts and testers review the acceptance criteria together?
- A. A joint review ensures that non-functional quality criteria are taken into account.
- B. The review of acceptance criteria helps to verify that acceptance test cases cover business processes, business rules and business risks.
- C. The review of acceptance criteria is a good practice to improve the quality of test reports.
- D. A shared vision between the business analyst and the tester on acceptance criteria facilitates the design of acceptance test cases.
Answer: D
NEW QUESTION 26
As an acceptance tester you want to test the $100 withdrawal process described by the following Business Process Model and Notation (BPMN) model.
You would like to achieve the following coverage criterion "execute all possible process tasks". Consider the following test cases:
Test 1: balance = $100, receipt = YES
Test 2: balance = $120, receipt = NO
Test 3: balance = $85
Test 4: balance = $20, receipt = YES
Which of the following is the minimal set of test cases allowing to achieve required coverage?
- A. Test 2, Test 4
- B. Test 1, Test 2, Test 4
- C. Test 1, Test 3
- D. Test 1, Test 2, Test 3
Answer: C
NEW QUESTION 27
Which one of the following statements describes the relation between business goals, business needs and requirements BEST?
- A. Business needs address the business solution whereas business requirements define the business problem or opportunity.
- B. Business goals and business needs are synonyms.
- C. Business goals, business needs and requirements describe at different levels of abstraction, what shall be achieved.
- D. To derive the business needs, the business analyst first has to understand the business goals and requirements.
Answer: C
NEW QUESTION 28
You are leading a brand new project team whose members are coming from all over the organization and have no former experience in working together. You need to build a common vision and team spirit. What workshop would fit BEST:
- A. You invite the team members and ask them to design their own (team-wise) emblem representing their values, beliefs, goals, tasks together than a common motto.
- B. You ask every member in turn to write down three things he/she likes and dislikes in the organization and to post them on a wall. A volunteer is then chosen to read randomly some posts that are then discussed with the group.
- C. You draw a staircase with 11 steps, each of them representing a major milestone of the project. The bottom of the stairs corresponds to the first day of the project and the upper step means that the project is released. You locate the present situation in the top of the stairs. The team is asked to identify and discuss the major steps downwards.
- D. You invite every member in turn to describe his/her past experience and his/her major achievements in the organization or in their former job.
Answer: A
NEW QUESTION 29
Which tool fits the mentioned acceptance test activities BEST?
- A. Business process management tools for modeling business processes and rules.
- B. Model-based testing tools for managing incidents.
- C. Requirements management tools for managing acceptance test execution campaigns.
- D. Test management and automation tools for business process model-based acceptance test generation.
Answer: A
NEW QUESTION 30
As an acceptance tester you are analyzing the following user story for a computer web-based mass multiplayer role-playing game:
As an unregistered player
I want to be able to register myself by defining my e-mail, login and password in a registration form so that I become a registered player Consider the following propositions of the acceptance criteria:
i.a registration form is displayed on the screen.
ii.the form is written in the Groovy language; the cursor is initially set on the 'login' field; after pushing the TAB button the cursor switches to 'password', 'repeat password', 'mail', and 'repeat mail' forms.
iii.I cannot register myself if the login I choose is used by another player.
iv.after successful registration process I am informed about it by an e-mail.
Which of the above statements would you consider as well-written acceptance criteria?
- A. only ii) and iv)
- B. only i) and iii)
- C. only ii)
- D. only i), iii) and iv)
Answer: D
NEW QUESTION 31
As a tester you participate in the project of the decision support system for granting a loan. You are asked to review the acceptance criteria for the following requirement:
REQ 3.28. The automated system records critical credit application data (CCAD. needed to support application screening.
Assume that it is well known what kind of data CCAD are. Which of the following would be the BEST example of an acceptance criterion for this requirement?
- A. The CCAD record process is quick and reversible.
- B. The CCAD is not recorded if it is incomplete and a message is displayed.
- C. The process for collecting CCAD meets corporate usability guidelines.
- D. The CCAD are stored in the MySQL relational database after each successful data entry procedure.
Answer: B
NEW QUESTION 32
......
Pass Your CTFL-AcT Dumps as PDF Updated on 2022 With 42 Questions: https://www.dumpstorrent.com/CTFL-AcT-exam-dumps-torrent.html
Verified CTFL-AcT Dumps Q&As - CTFL-AcT Test Engine with Correct Answers: https://drive.google.com/open?id=1VtVglB9BcqPdFOlFgSBTKtTXjKr-TQPI