Free ISQI TMMI-P_IND Study Guides Exam Questions & Answer [Q20-Q36]

Share

Free ISQI TMMI-P_IND Study Guides Exam Questions & Answer

TMMI-P_IND Exam Dumps, TMMI-P_IND Practice Test Questions

NEW QUESTION 20
The objective of a process area is to measure product quality early in the lifecycle, to enhance the test strategy and test approach by aligning static testing with dynamic testing, and to use the static testing results and data to optimize the test approach.
Which of the following process areas is concerned with this objective?

  • A. Test Measurement
  • B. Product Quality Evaluation
  • C. Peer Reviews
  • D. Advanced Reviews

Answer: D

 

NEW QUESTION 21
Consider the following five statements about TMMi level 2 process areas in an Agile context. Which of these statements are true, and which ones are false?
a. Test performance indicators in an Agile context at TMMi level 2 are always more related to team performance (for example, Velocity) than to the end-results of iterations (such as escaped defects).
b. The product risk assessment process for Agile projects will normally take a more lightweight approach than with a sequential lifecycle model.
c. The process area Test Monitoring and Control in an Agile context is not as important as in a traditional methodology, since sticking to a rigid plan is not one of the tenets of the Agile manifesto nor one of the principles of Agile.
d. For TMMi in an Agile project, it is not necessary to have traceability between requirements, test conditions and tests, because test conditions are not part of an Agile methodology.
e. Following the principles of Agile development, the specification of test environments is normally performed closer to test execution than in a sequential methodology, to provide the opportunity for late changes to be implemented.

  • A. Statements (A. and (E. are true, statements (b), (C. and (D. are false
  • B. Statements (B. and (D. are true, statements (a), (C. and (E. are false
  • C. Statements (B. and (C. are true, statements (a), (D. and (E. are false
  • D. Statement (B. is true, statements (a), (c), (D. and (E. are false

Answer: D

 

NEW QUESTION 22
Which of the following statements are TRUE?

  • A. The TMMi process area Test Planning is supported by the CMMI process areas Project Planning, Requirements Management and Risk Management.
  • B. The CMMI process area Causal Analysis and Resolution Process Area provides support for implementation of TMMi process area Quality Control.
  • C. Implementation of Non-Functional Testing process area of TMMi is supported by the CMMI process area Performance Management.
  • D. Practices within Specific Goal 2 (Perform Peer Reviews) of the CMMI process area Validation provide support for implementation of the TMMi process area Peer Reviews.

Answer: A

 

NEW QUESTION 23
Which of the following are valid reasons to perform a TMMi assessment?
1. Evaluate the performance of testers
2. Find areas to need to be improved
3. Determine which accomplishments have been made
4. As a basis to become formally TMMi certified

  • A. 1, 2 and 4
  • B. 1, 2 and 3
  • C. 2, 3 and 4
  • D. 1, 3 and 4

Answer: C

 

NEW QUESTION 24
A test organization is at TMMi level 4 and is trying to implement the TMMi level 5 process areas. One of the improvement goals for the current year is to implement a Defect Prevention program.
Which of the following specific practices needs to be addressed as part of the Defect Prevention process area?

  • A. Propose solutions to eliminate common causes, part of the specific goal Prioritize and Define Actions to Systematically Eliminate Root Causes of Defects.
  • B. Establish test process performance measures, part of the specific goal Establish a Statistically Controlled Test Process.
  • C. Pilot test process improvement proposals, part of the specific goal Select Test Improvements.
  • D. Manage the deployment, part of the specific goal Deploy Test Improvements.

Answer: A

 

NEW QUESTION 25
Advanced Reviews is a TMMi level 4 process area.
To which specific goal of the Advanced Reviews process area does the specific practice "Revise the product risks as appropriate" belong?

  • A. SG 3 Adjust the Test Approach Based on Review Results Early in the Lifecycle
  • B. SG 1 Coordinate the Peer Review Approach with the Dynamic Test Approach
  • C. SG 2 Measure Product Quality Early in the Lifecycle by Means of Peer Reviews
  • D. The specific practice "Revise the product risks as appropriate" is not related to a specific goal of the Advanced Reviews process area

Answer: A

 

NEW QUESTION 26
Which of the following process areas is a TMMi level 4 process area?

  • A. Test Lifecycle and Integration
  • B. Defect Prevention
  • C. Test Policy and Strategy
  • D. Advanced Reviews

Answer: D

 

NEW QUESTION 27
Which of the following is NOT a TMMi level 2 Process Area?

  • A. Test Monitoring and Control
  • B. Test Environment
  • C. Test Policy and Strategy
  • D. Peer Reviews

Answer: D

 

NEW QUESTION 28
Which of the following statements regarding the CMMI is FALSE?

  • A. An organization applying the continuous representation can select areas for improvement from different categories.
  • B. CMMI has both a staged and continuous representation.
  • C. In the staged representation there is no fixed set of levels or stages to proceed through.
  • D. In the continuous representation there is no fixed set of levels or stages to proceed through.

Answer: C

 

NEW QUESTION 29
During the diagnosing phase a TMMi assessment is performed to determine the current maturity status of the organization.
Which activity is performed in addition to the assessment during the diagnosing phase?

  • A. Set priorities
  • B. Plan Actions
  • C. Develop recommendation
  • D. Develop Approach

Answer: C

 

NEW QUESTION 30
The evolutionary testing model of Gelperin and Hetzel has served as a foundation for historical level differentiation in the TMMi. The evolutionary testing model describes a number of test phases.
Which of the following phases of the evolutionary testing model is associated with Maturity Level 1 "Initial" of the TMMi?

  • A. Destruction-oriented phase
  • B. Debugging-oriented phase
  • C. Demonstration-oriented phase
  • D. Evaluation-oriented phase

Answer: B

 

NEW QUESTION 31
Which of the following statements is TRUE regarding test process improvement in an Agile context?

  • A. The improvement cycle frequency is typically lower compared to the frequency in a traditional environment.
  • B. Since all team members typically perform some testing tasks in an Agile project, test improvement ideas can indeed come from any team member not just the testers.
  • C. The focus is on doing test process improvement at an organizational level.
  • D. The level of documentation is typically high, thereby allowing for many opportunities for improving the test documentation.

Answer: B

 

NEW QUESTION 32
Which of the following process areas is a TMMi level 3 process area?

  • A. Quality Control
  • B. Test Design and Execution
  • C. Non-Functional Testing
  • D. Advanced Reviews

Answer: C

 

NEW QUESTION 33
Which of the following activities is one that will typically be performed as part of the Diagnosing phase of the IDEAL test improvement cycle?

  • A. Develop Recommendations
  • B. Plan Actions
  • C. Develop Solution
  • D. Develop Approach

Answer: A

 

NEW QUESTION 34
Which of the following is FALSE about the specific goal 1 Align Test Measurement and Analysis Activities in process area 4.1 Test Measurement?

  • A. Specific goal 1 covers the communication of test measurement results after analysis.
  • B. Specific goal 1 addresses the specification of data collection, storage and analysis procedures
  • C. Specific goal 1 covers the establishment of test measurement objectives
  • D. Specific goal 1 addresses the specification of test measures

Answer: A

 

NEW QUESTION 35
What is the relevance of CMMI for test organizations?

  • A. CMMI adds value for organizations that implement TMMi because CMMI gives the organization the possibility to implement TMMi in a continuous way.
  • B. CMMI is not relevant for a test organization, as CMMI only covers software development.
  • C. Organizations that implement CMMI should also use TMMi for their test processes, because CMMI does not cover testing.
  • D. At CMMI level 3 two specific process area are defined for testing, Validation and Verification.

Answer: D

 

NEW QUESTION 36
......

Latest TMMI-P_IND Actual Free Exam Questions Updated 78 Questions: https://www.dumpstorrent.com/TMMI-P_IND-exam-dumps-torrent.html