350-701 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question
350-701 Sample with Accurate & Updated Questions
Cisco 350-701 certification exam, also known as Implementing and Operating Cisco Security Core Technologies, is a highly sought-after qualification in the field of networking and security. 350-701 exam tests the candidate’s knowledge and skills in implementing and operating core security technologies, such as network security, cloud security, endpoint protection, secure network access, visibility, and enforcement.
Cisco 350-701 certification exam is an excellent option for security professionals who wish to validate their knowledge and expertise in implementing and operating Cisco security core technologies. Implementing and Operating Cisco Security Core Technologies certification is globally recognized, highly respected, and covers a broad range of topics that are essential for security professionals to ensure the security of their networks and devices. Candidates who pass the exam can enhance their career prospects and demonstrate their competency in the field of network security.
Cisco 350-701 exam covers a wide range of topics related to security core technologies, including network security, cloud security, endpoint protection, secure network access, and visibility and enforcement. It's a challenging exam that requires a thorough understanding of the concepts related to Cisco security technologies. 350-701 exam consists of 90-110 questions and has a time limit of 120 minutes.
NEW QUESTION # 306
Which form of attack is launched using botnets?
- A. EIDDOS
- B. virus
- C. DDOS
- D. TCP flood
Answer: C
Explanation:
Explanation
A botnet is a collection of internet-connected devices infected by malware that allow hackers to control them.
Cyber criminals use botnets to instigate botnet attacks, which include malicious activities such as credentials leaks, unauthorized access, data theft and DDoS attacks.
NEW QUESTION # 307
Refer to the exhibit.
Which command was used to display this output?
- A. show dot1x interface gi1/0/12
- B. show dot1x
- C. show dot1x all summary
- D. show dot1x all
Answer: D
NEW QUESTION # 308
Which IPS engine detects ARP spoofing?
- A. ARP Inspection Engine
- B. AIC Engine
- C. Atomic ARP Engine
- D. Service Generic Engine
Answer: C
NEW QUESTION # 309
What are two Detection and Analytics Engines of Cognitive Threat Analytics? (Choose two)
- A. data exfiltration
- B. URL categorization
- C. snort
- D. intelligent proxy
- E. command and control communication
Answer: A,E
Explanation:
Cisco Cognitive Threat Analytics helps you quickly detect and respond to sophisticated, clandestine attacks that are already under way or are attempting to establish a presence within your environment. The solution automatically identifies and investigates suspicious or malicious web-based traffic. It identifies both potential and confirmed threats, allowing you to quickly remediate the infection and reduce the scope and damage of an attack, whether it's a known threat campaign that has spread across multiple organizations or a unique threat you've never seen before.
Detection and analytics features provided in Cognitive Threat Analytics are shown below:
+ Data exfiltration: Cognitive Threat Analytics uses statistical modeling of an organization's network to identify anomalous web traffic and pinpoint the exfiltration of sensitive data. It recognizes data exfiltration even in HTTPS-encoded traffic, without any need for you to decrypt transferred content
+ Command-and-control (C2) communication: Cognitive Threat Analytics combines a wide range of data, ranging from statistics collected on an Internet-wide level to host-specific local anomaly scores. Combining these indicators inside the statistical detection algorithms allows us to distinguish C2 communication from benign traffic and from other malicious activities. Cognitive Threat Analytics recognizes C2 even in HTTPSencoded or anonymous traffic, including Tor, without any need to decrypt transferred content, detecting a broad range of threats
...
NEW QUESTION # 310
What is the primary benefit of deploying an ESA in hybrid mode?
- A. It provides maximum protection and control of outbound messages
- B. It provides the lowest total cost of ownership by reducing the need for physical appliances
- C. It provides email security while supporting the transition to the cloud
- D. You can fine-tune its settings to provide the optimum balance between security and performance for your environment
Answer: C
Explanation:
Explanation
Cisco Hybrid Email Security is a unique service offering that facilitates the deployment of your email security infrastructure both on premises and in the cloud. You can change the number of on-premises versus cloud users at any time throughout the term of your contract, assuming the total number of users does not change.
This allows for deployment flexibility as your organization's needs change.
NEW QUESTION # 311
Which two deployment model configurations are supported for Cisco FTDv in AWS? (Choose two.)
- A. Cisco FTDv configured in routed mode and managed by a physical FMC appliance on premises
- B. Cisco FTDv with two management interfaces and one traffic interface configured
- C. Cisco FTDv configured in routed mode and IPv6 configured
- D. Cisco FTDv configured in routed mode and managed by an FMCv installed in AWS
- E. Cisco FTDv with one management interface and two traffic interfaces configured
Answer: A,D
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/security/adaptive-security-virtual-appliance-asav/ white-paper-c11-740505.html
NEW QUESTION # 312
An organization wants to improve its cybersecurity processes and to add intelligence to its data The organization wants to utilize the most current intelligence data for URL filtering, reputations, and vulnerability information that can be integrated with the Cisco FTD and Cisco WSA What must be done to accomplish these objectives?
- A. Configure the integrations with Talos Intelligence to take advantage of the threat intelligence that it provides.
- B. Download the threat intelligence feed from the IETF and import it into the Cisco FTD and Cisco WSA databases
- C. Create a Cisco pxGrid connection to NIST to import this information into the security products for policy use
- D. Create an automated download of the Internet Storm Center intelligence feed into the Cisco FTD and Cisco WSA databases to tie to the dynamic access control policies.
Answer: A
NEW QUESTION # 313
An organization has a Cisco Stealthwatch Cloud deployment in their environment. Cloud logging is working as expected, but logs are not being received from the on-premise network, what action will resolve this issue?
- A. Deploy a Cisco FTD sensor to send events to Cisco Stealthwatch Cloud
- B. Deploy a Cisco Stealthwatch Cloud sensor on the network to send data to Cisco Stealthwatch Cloud
- C. Configure security appliances to send syslogs to Cisco Stealthwatch Cloud
- D. Configure security appliances to send NetFlow to Cisco Stealthwatch Cloud
Answer: B
Explanation:
Explanation
Explanation
You can also monitor on-premises networks in your organizations using Cisco Stealthwatch Cloud. In order to do so, you need to deploy at least one Cisco Stealthwatch Cloud Sensor appliance (virtual or physical appliance).
NEW QUESTION # 314
A network engineer has entered the snmp-server user andy myv3 auth sha cisco priv aes 256 cisc0380739941 command and needs to send SNMP information to a host at 10.255.254.1. Which command achieves this goal?
- A. snmp-server host inside 10.255.254.1 snmpv3 myv3
- B. snmp-server host inside 10.255.254.1 snmpv3 andy
- C. snmp-server host inside 10.255.254.1 version 3 myv3
- D. snmp-server host inside 10.255.254.1 version 3 andy
Answer: D
Explanation:
Explanation
The command "snmp-server user user-name group-name [remote ip-address [udp-port port]] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password]} [access access-list]" adds a new user (in this case "andy") to an SNMPv3 group (in this case group name "myv3") and configures a password for the user.
In the "snmp-server host" command, we need to:
+ Specify the SNMP version with key word "version {1 | 2 | 3}"
+ Specify the username ("andy"), not group name ("myv3").
Note: In "snmp-server host inside ..." command, "inside" is the interface name of the ASA interface through which the NMS (located at 10.255.254.1) can be reached.
NEW QUESTION # 315
What is the benefit of integrating cisco ISE with a MDM solution?
- A. It provides network device administration access
- B. It provides the ability to update other applications on the mobile device
- C. It provides compliance checks for access to the network
- D. It provides the ability to add applications to the mobile device through Cisco ISE
Answer: C
NEW QUESTION # 316
Which RADIUS attribute can you use to filter MAB requests in an 802.1 x deployment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation Because MAB uses the MAC address as a username and password, you should make sure that the RADIUS server can differentiate MAB requests from other types of requests for network access. This precaution will prevent other clients from attempting to use a MAC address as a valid credential. Cisco switches uniquely identify MAB requests by setting Attribute 6 (Service-Type) to 10 (Call-Check) in a MAB Access-Request message. Therefore, you can use Attribute 6 to filter MAB requests at the RADIUS server. Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networkingservices/config_guide_c17-663759.html Because MAB uses the MAC address as a username and password, you should make sure that the RADIUS server can differentiate MAB requests from other types of requests for network access. This precaution will prevent other clients from attempting to use a MAC address as a valid credential. Cisco switches uniquely identify MAB requests by setting Attribute 6 (Service-Type) to 10 (Call-Check) in a MAB Access-Request message. Therefore, you can use Attribute 6 to filter MAB requests at the RADIUS server.
Explanation Because MAB uses the MAC address as a username and password, you should make sure that the RADIUS server can differentiate MAB requests from other types of requests for network access. This precaution will prevent other clients from attempting to use a MAC address as a valid credential. Cisco switches uniquely identify MAB requests by setting Attribute 6 (Service-Type) to 10 (Call-Check) in a MAB Access-Request message. Therefore, you can use Attribute 6 to filter MAB requests at the RADIUS server. Reference: https://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/identity-based-networkingservices/config_guide_c17-663759.html
NEW QUESTION # 317
Which CoA response code is sent if an authorization state is changed successfully on a Cisco IOS device?
- A. CoA-NAK
- B. CoA-ACK
- C. CoA-NCL
- D. COA-MAB
Answer: B
NEW QUESTION # 318
What is a characteristic of Cisco ASA NetFlow v9 Secure Event Logging?
- A. It tracks flow-create, flow-teardown, and flow-denied events.
- B. Its events match all traffic classes in parallel.
- C. It tracks the flow continuously and provides updates every 10 seconds.
- D. It provides stateless IP flow tracking that exports all records of a specific flow.
Answer: A
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa92/configuration/general/asa-general-cli/ monitor-nsel.html
NEW QUESTION # 319
In which type of attack does the attacker insert their machine between two hosts that are communicating with each other?
- A. insecure API
- B. LDAP injection
- C. man-in-the-middle
- D. cross-site scripting
Answer: C
Explanation:
NEW QUESTION # 320
An engineer needs to add protection for data in transit and have headers in the email message Which configuration is needed to accomplish this goal?
- A. Provision the email appliance
- B. Enable flagged message handling
- C. Map sender !P addresses to a host interface.
- D. Deploy an encryption appliance.
Answer: B
NEW QUESTION # 321
Refer to the exhibit.
Which type of authentication is in use?
- A. SMTP relay server authentication
- B. POP3 authentication
- C. external user and relay mail authentication
- D. LDAP authentication for Microsoft Outlook
Answer: C
Explanation:
The TLS connections are recorded in the mail logs, along with other significant actions that are related to messages, such as filter actions, anti-virus and anti-spam verdicts, and delivery attempts. If there is a successful TLS connection, there will be a TLS success entry in the mail logs. Likewise, a failed TLS connection produces a TLS failed entry. If a message does not have an associated TLS entry in the log file, that message was not delivered over a TLS connection. Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118844-technoteesa-00.html The exhibit in this Qshows a successful TLS connection from the remote host (reception) in the mail log.
messages, such as filter actions, anti-virus and anti-spam verdicts, and delivery attempts. If there is a successful TLS connection, there will be a TLS success entry in the mail logs. Likewise, a failed TLS connection produces a TLS failed entry. If a message does not have an associated TLS entry in the log file, that message was not delivered over a TLS connection.
Reference:
The TLS connections are recorded in the mail logs, along with other significant actions that are related to messages, such as filter actions, anti-virus and anti-spam verdicts, and delivery attempts. If there is a successful TLS connection, there will be a TLS success entry in the mail logs. Likewise, a failed TLS connection produces a TLS failed entry. If a message does not have an associated TLS entry in the log file, that message was not delivered over a TLS connection. Reference: https://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118844-technoteesa-00.html The exhibit in this Qshows a successful TLS connection from the remote host (reception) in the mail log.
NEW QUESTION # 322
Which two statements about a Cisco WSA configured in Transparent mode are true? (Choose two.)
- A. WCCP v2-enabled devices can automatically redirect traffic destined to port 80.
- B. It requires a proxy for the client web browser.
- C. It requires a PAC file for the client web browser.
- D. It can handle explicit HTTP requests.
- E. Layer 4 switches can automatically redirect traffic destined to port 80.
Answer: A,E
NEW QUESTION # 323
......
Pass Cisco 350-701 Premium Files Test Engine pdf - Free Dumps Collection: https://www.dumpstorrent.com/350-701-exam-dumps-torrent.html
350-701 Exam Info and Free Practice Test | DumpsTorrent: https://drive.google.com/open?id=1ED6waNu2wu_hVXkQuuPySIn3TS5w3NPL