Ultimate Guide to the DES-DD33 - Latest Oct 22, 2021 Edition Available Now [Q14-Q33]

Share

Ultimate Guide to the DES-DD33 - Latest Oct 22, 2021 Edition Available Now

2021 Updated Verified Pass DES-DD33 Exam - Real Questions & Answers

NEW QUESTION 14
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?

  • A. L2000
  • B. L6000
  • C. TS3500
  • D. L180

Answer: C

 

NEW QUESTION 15
Which protocol is used with Dell EMC Cloud Tier to transfer data between a PowerProtect DD appliance and the cloud?

  • A. FTP
  • B. NFS
  • C. HTTPS
  • D. SFTP

Answer: B

Explanation:
A DD series appliance at a Faction data center can be used as single backup target to protect workloads across multiple clouds. Using DD Boost, CIFS, and NFS protocols.

 

NEW QUESTION 16
Which PowerProtect DD procedure uses the DoD/NIST standards to provide data security?

  • A. Replication Encryption
  • B. Data Sanitization
  • C. Encryption
  • D. End-to-End Verification

Answer: B

 

NEW QUESTION 17
A backup administrator needs to implement BoostFS for Windows.
What do they need to install on the Windows server? (Choose all that apply.)

  • A. FUSE
  • B. CBFS
  • C. NFS
  • D. CIFS

Answer: C,D

Explanation:
For CIFS/NFS/DD BoostFS, the first consideration to address is what level of CIFS, NFS and DD BoostFS sharing is wanted for the DD series appliances.

 

NEW QUESTION 18
An administrator wants to integrate a PowerProtect DD appliance into their current backup environment using CIFS, NFS, DD Boost, and VTL.
Which backup applications support these protocols?

  • A. Veritas NetBackup and Dell EMC NetWorker
  • B. Commvault Simpana and Veritas Backup Exec
  • C. IBM Spectrum Protect and Veritas NetBackup
  • D. Dell EMC Avamar and Dell EMC NetWorker

Answer: A

 

NEW QUESTION 19
What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end verification process?

Answer:

Explanation:

 

NEW QUESTION 20
What information does the daily Autosupport report contain?

  • A. System and Quota alerts
  • B. System and MTree capacity
  • C. Quota alerts and MTree capacity
  • D. MTree capacity and System alerts

Answer: A

Explanation:
The autosupport command manages system reports. Command options enable administrative users to manage two reports that describe the state of a Data Domain system: the autosupport report and the daily alert summary.

 

NEW QUESTION 21
What is a requirement to use the PowerProtect DD HA feature?

  • A. Head units and notes require an active/active configuration
  • B. Dual set of shared storage configuration
  • C. Each head unit requires its own FS25 shelf
  • D. A single set of shared storage

Answer: B

 

NEW QUESTION 22
What is the maximum number of concurrently active MTrees that are supported on any PowerProtect DD appliance with DDOS 7.3?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:

 

NEW QUESTION 23
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 24
Which DDOS role is used for scheduling and running the backup application in a secure multi-tenancy environment?

  • A. Tenant Admin
  • B. Admin
  • C. Tenant User
  • D. Security Officer

Answer: B

 

NEW QUESTION 25
Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 26
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?

  • A. no and nfs_rfc1323=0
  • B. yes and nfs_rfc1323=0
  • C. no and nfs_rfc1323=1
  • D. yes and nfs_rfc1323=1

Answer: D

 

NEW QUESTION 27
What are the steps to configure the Retention Lock Compliance?

Answer:

Explanation:

 

NEW QUESTION 28
A PowerProtect DD appliance has been installed at a company's location for several months and has reached a steady state.
As a best practice, at what percentage of disk utilization should action be taken?

  • A. 80%
  • B. 60%
  • C. 70%
  • D. 95%

Answer: A

 

NEW QUESTION 29
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?

  • A. FTP
  • B. HTTP
  • C. SSH
  • D. SSL

Answer: B

 

NEW QUESTION 30
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server.
How can they verify that the zoning was completed properly and the server HBA are visible?

  • A. scsitarget show initiator list
  • B. scsitarget show initiator
  • C. scsitarget initiator show list
  • D. scsitarget initiator list

Answer: C

 

NEW QUESTION 31
A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GiB.
What is the minimum tape type to support this requirement?

  • A. LTO-3
  • B. LTO-5
  • C. LTO-4
  • D. LTO-2

Answer: C

 

NEW QUESTION 32
A backup administrator wants to verify that quotas have been enabled on a PowerProtect DD appliance.
Which command is used to verify that quotas are being enforced?

  • A. quota capacity reset
  • B. quota capacity set
  • C. quota capacity status
  • D. mtree show quota

Answer: B

 

NEW QUESTION 33
......


EMC DES-DD33 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Recognize the packet flow in a typical backup environment with and without a Dell EMC PowerProtect DD system
  • Adjusting compression settings, deleting or reusing storage units, configuring replication and disaster recovery
Topic 2
  • Monitor PowerProtect DD capacity and estimate storage burn rate
  • PowerProtect DD Concepts and Features
Topic 3
  • Implement Dell EMC Data Domain system with key protocols, including NFS/CIFS, DD Boost, VTL, and NDMP
  • PowerProtect DD Implementation in Backup Environments and Integration with Application Software
Topic 4
  • Identify typical Dell EMC PowerProtect DD backup and recovery solutions
  • Distinguish between key backup software components
Topic 5
  • Verify hardware and analyze and interpret space utilization and compression graphs
  • Identify and describe various Dell EMC PowerProtect DD software options and the functionality they enable
Topic 6
  • Manage system access and describe and configure autosupport, Support bundle, SNMP, and Syslog
  • Describe PowerProtect DD product positioning
Topic 7
  • Describe key information points for a backup and recovery solution using DD Boost/OST technology
  • Monitor system activity and performance and evaluate the cleaning frequency
Topic 8
  • Explain the key differentiators of the Dell EMC PowerProtect DD deduplication technology
  • Backup environments including integrated Dell EMC PowerProtect DD systems
Topic 9
  • Implement best practices and system tuning procedures for optimal performance
  • Describe Dell EMC Cloud Tier features, benefits, architecture and use cases
Topic 10
  • Implement Dell EMC PowerProtect DD system with key technologies, including data security
  • Perform administrative tasks on Dell EMC PowerProtect DD systems with the Dell EMC Cloud Tier

 

Dumps Moneyack Guarantee - DES-DD33 Dumps Approved Dumps: https://www.dumpstorrent.com/DES-DD33-exam-dumps-torrent.html