Get New 2024 IBM exam C1000-132 Dumps Bundle On flat Updated Dumps!
Full C1000-132 Practice Test and 66 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 32
When viewing a Storeroom in the Manage Inventory Work Center, what are three record sets (tabs) that can be viewed?
- A. Reconcile
- B. Child Storerooms
- C. Year to Date Figures
- D. Balances
- E. Counts
- F. Vendors
Answer: B,D,E
Explanation:
In IBM Maximo Manage v8.0 implementation, when viewing a Storeroom in the Manage Inventory Work Center, the three record sets (tabs) that can be viewed are Child Storerooms, Counts, and Balances. These record sets provide different views of the inventory and allow users to manage and track inventory levels and movements.
NEW QUESTION # 33
In the Assets application a used engine needs to be replaced with a rebuilt engine, how might the rebuilt engine inherit the depreciation schedule from the used engine?
- A. Use the action Copy Depreciation Schedules.
- B. Use the action Exchange Depreciation Schedules.
- C. Use the action Split Depreciation Schedules.
- D. Use the action Swap Depreciation Schedules.
Answer: A
Explanation:
To replace a used engine with a rebuilt engine in the Assets application in IBM Maximo Manage v8.0 implementation and inherit the depreciation schedule from the used engine, you can use the "Copy Depreciation Schedules" action. This action allows you to copy the depreciation schedules from the old asset to the new asset, including the depreciation terms and any calculation information.
NEW QUESTION # 34
What is the result of selecting the Validate GL Component Combinations in the Chart of Accounts application on financial transactions?
- A. Any valid GL component can be used.
- B. Any GL component can be used.
- C. Only valid GL accounts can be used.
- D. Validates transactions occurred during an active financial period.
Answer: C
Explanation:
When selecting the Validate GL Component Combinations in the Chart of Accounts application on financial transactions in IBM Maximo Manage, only valid GL accounts can be used.
NEW QUESTION # 35
Which Maximo Application Suite add-on enables managing certificates for assets and training requirements for personnel?
- A. Asset Configuration Manager
- B. Health, Safety and Environment (HSE)
- C. Maximo HR Manager
- D. Service Provider
Answer: B
Explanation:
The Health, Safety and Environment (HSE) add-on in the IBM Maximo Application Suite enables managing certificates for assets and training requirements for personnel. This add-on provides functionality for managing health and safety risks, including compliance with regulations, management of environmental incidents, and tracking of personnel certifications and training.
NEW QUESTION # 36
Calendars can be associated with which three record types?
- A. Assets
- B. Items
- C. Person
- D. Contracts
- E. Job Plan
- F. Locations
Answer: A,C,F
NEW QUESTION # 37
What information can be updated in the Master PM application for an associated Preventive Maintenance record (PM)?
- A. Work Order Status
- B. Generate Work Orders
- C. PM Forecast
- D. PM Hierarchy
Answer: C
Explanation:
The PM Forecast field on the Master PM record is used to specify how many days ahead you want to forecast work orders for associated PMs2. This field can be updated in the Master PM application and affects how many work orders are generated from the associated PMs.
NEW QUESTION # 38
Select all that apply
What is the appropriate order of phases in order to create a workflow process?
Answer:
Explanation:
1 - Create the process
2 - Validate the process
3 - Enable the process
NEW QUESTION # 39
What are the three default classes of a Ticket?
- A. Incident
- B. Release
- C. Service Request
- D. Problem
- E. Change
- F. Activity
Answer: A,C,D
Explanation:
The three default classes of a Ticket in IBM Maximo Manage are Problem, Service Request and Incident.
NEW QUESTION # 40
Apart from Standard and Average, what other three costing methods can be used in the Inventory application?
- A. FIFO
- B. Asset
- C. LILO
- D. Weighted Average
- E. LIFO
- F. FILO
Answer: A,D,E
Explanation:
Apart from Standard and Average costing methods in IBM Maximo Manage's Inventory application, three other costing methods that can be used are FIFO (First In First Out), LIFO (Last In First Out) and Weighted Average.
NEW QUESTION # 41
Which two statuses of a Purchase Order will allow a receipt of new items to be processed in the Receiving application if the Purchase Order is not being revised?
- A. APPR
- B. REVISD
- C. INPRG
- D. HOLD
- E. PNDREV
Answer: A,C
Explanation:
In IBM Maximo Manage, if a Purchase Order is not being revised, two statuses that will allow a receipt of new items to be processed in the Receiving application are APPR and INPRG.
NEW QUESTION # 42
In which status can a Job Plan be modified to add a new task?
- A. INACTIVE
- B. PNDREV
- C. NEW
- D. REVISED
Answer: D
NEW QUESTION # 43
In the Purchase Requisitions application and with default settings, what status does the Purchase Requisition change to when all of its lines have been copied to a Purchase Order or a Contract?
- A. APPR
- B. CLOSE
- C. INPRG
- D. COMPLETE
Answer: D
Explanation:
In the Purchase Requisitions application with default settings in IBM Maximo Manage, when all lines of a Purchase Requisition have been copied to a Purchase Order or a Contract, the status of the Purchase Requisition changes to COMPLETE.
NEW QUESTION # 44
In the Item Master application, with what can a Kit Item be associated?
- A. Condition enabled item
- B. Lot item
- C. Service item
- D. Non Rotating item
Answer: D
Explanation:
a Kit Item can be associated with A. Non Rotating item. When you create a kit record for an item in the Item Master application, you can define the structure of the kit using the Item Assembly Structure tab1. When adding a kit to a storeroom, if the component items do not exist in the storeroom, inventory records are created for these items1. However, you cannot create item kits that contain condition-enabled, rotating or lotted items1.
NEW QUESTION # 45
How is the Lock Out / Tag Outs application structured?
- A. Specify a Lock Out on the Location or Asset and define the Tag Out Operations.
- B. Define the isolation procedures on a set of related assets and specify a sequence.
- C. Specify a Tag Out on the Location or Asset and define the Lock Out Operations.
- D. Specify a Lock Out on an Asset with a Locking Device and define the Tag Out Operations.
Answer: A
Explanation:
In IBM Maximo Manage v8.0 implementation, the Lock Out / Tag Out application is structured such that you specify a Lock Out on the Location or Asset and define the Tag Out operations. This application is used to manage the procedures and controls put in place to protect personnel from injury due to unintended or inadvertent equipment or system operation.
NEW QUESTION # 46
What is the purpose of the Admin mode?
- A. change System Properties without needing to shut down the Maximo server
- B. perform administrative functions
- C. perform Database Configuration without needing to shut down the Maximo server
- D. apply changes in Application Designer
Answer: C
Explanation:
The purpose of Admin mode in IBM Maximo Manage is to allow users to perform Database Configuration without needing to shut down the Maximo server.
NEW QUESTION # 47
The loT Connector provides Maximo Manage, Maximo Health and Maximo Predict the ability to connect to which two data sources?
- A. Maximo Assist
- B. IBM Watson loT Platform
- C. Maximo Monitor
- D. Maximo Safety
- E. Maximo Spatial
Answer: B,C
Explanation:
IoT Connector provides Maximo Manage, Maximo Health and Maximo Predict the ability to connect to C. IBM Watson IoT Platform and E. Maximo Monitor data sources. The IoT Connector in the Administration Work Center can be used to configure a connection to an IoT platform such as IBM Watson IoT Platform and IBM Maximo Asset Monitor1.
NEW QUESTION # 48
What is a core application in Maximo Manage?
- A. Permit to Work
- B. Graphical Scheduling
- C. Customer Billing
- D. Maintenance Version Control
Answer: A
Explanation:
The Permit to Work application is a core application in IBM Maximo Manage v8.0. This application allows users to manage work permits, ensure compliance with safety regulations, and ensure that work is authorized before it is started. Other core applications in Maximo Manage include Work Order Tracking, Asset Management, and Inventory Management.
NEW QUESTION # 49
In the Budget Monitoring application, where are the budget amounts entered?
- A. Budget Line
- B. Budget Record
- C. Budget Rules
- D. Focal Point
Answer: A
Explanation:
the budget amounts in the Budget Monitoring application are entered at the Budget Line level. A Budget Line represents a specific account or category within a budget and allows for detailed tracking and analysis of budget data.
NEW QUESTION # 50
......
[Jan-2024] Pass IBM C1000-132 Exam in First Attempt Guaranteed: https://drive.google.com/open?id=1EMCRZ23P9A8YPGQLNxuNZSpGyoJ6Y0P5
Reduce Your Chance of Failure in C1000-132 Exam: https://www.dumpstorrent.com/C1000-132-exam-dumps-torrent.html