2022 Updated 1Z0-1079-21 Tests Engine pdf - All Free Dumps Guaranteed!
Latest Global Trade and Transportation Management Cloud 1Z0-1079-21 Actual Free Exam Questions
NEW QUESTION 26
How should you set up permissions for users to access data in other domains?
- A. UseInsert User Role in VPD Profile.
- B. Use Domain Grants.
- C. Assign User Preference via Manage User access.
- D. Assign Access Control List in User Role.
Answer: B
NEW QUESTION 27
Your customer has US and German orders.
How do you set up a User role in Global Trade Management (GTM) with read/write access for US orders, and only read access for German orders?
- A. Assign multiple User Role grants in User Role.
- B. Access can be controlled by using VPD profile along with External Predicates.
- C. Assign multiple User Roles whilecreating the user.
- D. Access can be controlled by using Access Control List and assigned to User Role.
Answer: C
NEW QUESTION 28
When assigning rules to service providers to support Freight Payment, which two statements are true? (Choose two.)
- A. The Autopay check box should be selected for the rules to apply.
- B. Each service provider can have only one match rule profile assigned.
- C. One can assign a match rule profile and an approval rule profile to a service provider.
- D. The rules cannot be changed once assigned to a service provider.
Answer: A,B
NEW QUESTION 29
If a Rate Record and a Rate Offering are configured with conflicting values in the same data elements, how does OTM address this?
- A. During planning, the user will have the option of indicating if OTM should prioritize either the Rate Offering or the Rate Record setting.
- B. OTM's planning engine will run the solver for both settings, but only consider the least costresult.
- C. Such a conflict cannot exist in OTM.
- D. The Rate Record will take priority over the Rate Offering configuration.
- E. The Rate Offering will takepriority over the Rate Record configuration.
Answer: C
NEW QUESTION 30
When a new Service Provider is created, OTM automatically does which of the following?
- A. OTM associates the Service Provider calendar with the calendar of the CORPORATION ID identified during setup.
- B. OTM sends an email or fax to the Service Providercontact, depending on the contact's preferred contact method.
- C. OTM creates a corresponding LOCATION, with the location Role of "CARRIER".
- D. OTM assigns the default Calendar defined in the Parameter Set.
Answer: D
NEW QUESTION 31
You are writing an agent to be triggered when an Order Release Update is received via integration. You would like the agent to check if the Order Release is on a shipment and if it is, you want OTM to only update the Order Release.
Which option will achieve this?
- A. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- B. You can use an agent saved condition OR ON SHIPMENT and use the ORDER RELEASE - MOD - NO PROCESSING action.
- C. You can use an agent saved condition to identify OR ON SHIPMENT WITH RESOURCES TENDERED/ SECURED and use the ORDER RELEASE - MOD - NO PROCESSING agent action.
- D. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FULL IMPACT action.
- E. You can use an agent saved condition to identify OR ON SHIPMENT and use the ORDER RELEASE - MOD - FUTURE PROCESSING agent action.
Answer: C
NEW QUESTION 32
Identify the incorrect option pertaining to TiHi.
- A. This configuration captures the number of boxes/cartons stored on a layer.
- B. This is configured in Item Setup.
- C. This configuration captures the number of layers of boxes/cartons that can be stacked on the pallet.
- D. This configuration will impact mixed pallet functionality.
Answer: C
NEW QUESTION 33
Shipment# 10059 is aMulti-Stop shipment with two orders. Both orders are picked up in New York City. One of the orders is dropped off in Philadelphia, Pennsylvania, and the other order dropped off in Baltimore, Maryland. There is empty capacity on this shipment for you to addanother order (# 1234), which is picking up in Philadelphia and dropping off in Baltimore. The status of Shipment# 10059 is "SECURE RESOURCES:
NOT_STARTED"
Which shipment planning option should you use to ensure that order release# 1234 is assigned to Shipment#
10059?
- A. Show Routing Options
- B. Manual
- C. Bulk Plan
- D. Move Order to Existing Shipment
Answer: A
NEW QUESTION 34
Which business object do you use to set up the details of the classification data that you want to download and configure how it is mapped from the content provider's data to the Global TradeManagement (GTM) data structure?
- A. Content Source
- B. Product Classification Category
- C. Data Load Type
- D. External System
Answer: D
NEW QUESTION 35
What is the difference between a BUY Shipment and a SELL Shipment?
- A. BUY Shipments are created when you wish to purchase services, and SELL Shipments are created when you wish to charge a customer for services.
- B. BUY Shipments are tendered to third party carriers, and SELL Shipments are tendered to a company's private Fleet.
- C. BUY Shipments are created by Planners in a Company domain for their own shipments, and SELL Shipments are created by Planners in a 3PL COMPANY domain for their clients' shipments.
- D. BUY Shipments are created for inbound (vendor Purchase Orders) shipments, and SELL Shipments are created for outbound (company Sales Orders) shipments.
Answer: C
NEW QUESTION 36
Which option represents Original Invoice Cost field at Shipment?
- A. Total Actual Cost minus the rebate amount as defined in the Secondary Charge Rules
- B. Contains the initial invoiceamount adjusted by any additional charges or invoices that the carrier later sent to you
- C. Total Approved Cost on a sell Shipment
- D. The Initial invoice amount received from the carrier
Answer: D
NEW QUESTION 37
Which three statements are true when setting up Match Rules for Freight Payment in OTM? (Choose three.)
- A. The matching rule could be different for different service providers.
- B. You need to specify at least one shipment reference number qualifier to match to.
- C. The match rule will apply to all invoices, unless only certain service providers are specified on the match rule.
- D. You could specify several shipment reference values to match to.
- E. BM or Bill Of Lading is a mandatoryshipment reference number qualifier to match to.
Answer: A,B,E
NEW QUESTION 38
Which statement is correct regarding the OTM Parameter Set?
- A. There are less than 30 parameters that can be changed in the Default Parameter Set.
- B. OTM allows more than one Parameter Set, but they must be stored in the PUBLIC domain.
- C. OTM allows only one Parameter Set, and it is stored in the PUBLIC domain.
- D. Parameter Sets are mandatory during Bulk planning.
- E. If you want to create a Parameter Set, you must name it "DEFAULT".
Answer: E
NEW QUESTION 39
Which threestatements are true about Regions in Global Trade Management (GTM)? (Choose three.)
- A. Regions can be directly used after being uploaded by a CSV file.
- B. Regions cannot be directly used after beinguploaded by a CSV file.
- C. Regions created in the UI need to be formulated.
- D. Regions uploaded by a CSV file need to be formulated.
- E. Regions can be directly used after being created by a user in the UI.
Answer: A,C,D
NEW QUESTION 40
To import Rates in OTM, which are four key components that you must configure? (Choose four.)
- A. Rate Record
- B. Rate Service
- C. Lanes
- D. Itinerary
- E. Rate Offering
- F. Rate Quality
- G. Accessorial
Answer: A,B,E,G
NEW QUESTION 41
Which are the two ways inwhich Milestones differ from Agents? (Choose two.)
- A. Agents may be made up of one or more Milestones.
- B. Milestones may be both "reactive"(for example, they monitor for a condition to occur) and "proactive" (for example, they can initiate before, at, or a prescribed number of times after a condition occurs).
- C. Milestones monitor for a condition to occur, whereas Agents only start and stop based on a time-based schedule.
- D. Agents monitor for a condition to occur, whereas Monitors only start and stop based on a time-based schedule.
- E. Milestones may be made up of one or more Agents.
Answer: B,E
NEW QUESTION 42
Which one of the following is the correct procedure for setting up and assigning a Screen Set ID to a User?
- A. Create a Screen set ID, assign it to Menu Manager and assign it to User.
- B. Always unassign existing menu and create a screen Set ID,assign it to User.
- C. Create a Screen Set ID and assign it to User.
- D. Create a Screen Set ID and assign it to Domain.
Answer: A
NEW QUESTION 43
When reviewing Invoices in the OTM Payment Invoice Manager, you have theoption of selecting the "Pass Through" checkbox.
Identify the correct statement about what the "Pass Through" checkbox does.
- A. It allows the invoice to be paid without consideration for any invoice matching rules.
- B. It allows for more shipment cost lines to be added to the associated shipment.
- C. It allows for more invoice amounts to be allocated to the invoice.
- D. It allows for the invoices from other shipments to be consolidated onto this invoice.
Answer: D
NEW QUESTION 44
If you have just installed OTM,which domain would not be created by default?
- A. SERVPROV
- B. BLUEPRINT
- C. STAGE
- D. GUEST
- E. MASTER
Answer: E
NEW QUESTION 45
Given the information:
Which two options are correct for Service Preference configuration? (Choose two.)
- A. If the Data Version ID is not specified and if there is a Restricted Parties List with a Data Version with the "Current" flag set, it will be used for screening.
- B. Exclude Words is used to specify words to exclude when ONLY "Dice"Match Engine is used.
- C. At the most sixty-four words can be specified in Exclude Words.
- D. If the Data Version ID is not specified, then the system will throw an error during screening that Data Version ID needs to be specified.
- E. It is not mandatory to specify Agency Code.
Answer: A,C
NEW QUESTION 46
Which two statements aretrue about authority configuration in Global Trade Management (GTM)? (Choose two.)
- A. An authority has to be linked to a region by using region configuration.
- B. There can be only one authority defined for a domain in GTM.
- C. An authority has tobe defined in the PUBLIC domain.
- D. Authorities are regulatory agencies, such as the US Bureau of Industry and Security.
- E. Authority configuration involves defining the Authority ID, Name, and Description.
Answer: D,E
NEW QUESTION 47
Which two statements about shipment statuses are true? (Choose two.)
- A. ENROUTE_ENROUTE - indicates that the shipment is moving from one location to another.
- B. ENROUTE_DELAYED - indicatesthat the shipment was unable to travel on the planned route, and has taken a detour.
- C. ENROUTE_UNLOADED PARTIAL - indicates that the shipment has reached the final destination and is in the process of being unloaded.
- D. ENROUTE_DIVERTED - indicates that the shipment was delayed in leaving the previous locationdue to the late pickup time, and will be late arriving to the destination location.
- E. ENROUTE_NOT STARTED - indicates that the shipment has not been picked up from the initial pickup stop yet.
Answer: A,E
NEW QUESTION 48
......
Oracle 1Z0-1079-21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
1Z0-1079-21 Dumps Updated Practice Test and 56 unique questions: https://www.dumpstorrent.com/1Z0-1079-21-exam-dumps-torrent.html