Tested Material Used To 71300X Test Engine Exam Questions in here [Oct-2021]
Penetration testers simulate 71300X exam PDF
NEW QUESTION 20
A customer reports that when using Presence services, the users cannot see the Presence status.
Which two tools are used to trace a PUBLISH message. In the Avaya BreezeTM server? (Choose two.)
- A. traceSM
- B. traceCE
- C. tracePRS
- D. traceSBC
- E. tracePS
Answer: A,E
NEW QUESTION 21
On Avaya Session Border Controller for Enterprise (SBCE), where do you access the tool that displays SIP messages, in real time, as they pass through the SBCE?
- A. from the SBCE EMS Web Console
- B. from the SBCE Server command line via SSH session, using PuTTY
- C. from Avaya Aura System Manager, navigate to "Session Border Controller for Enterprise > SBCE Administration" menu
- D. from the traceSIP client installed on a local PC
Answer: B
Explanation:
Explanation
Stat the tue Tracing Tools, TraceSM, SSH to Session Manager
1. Launch PuTTY (or similar client application) for a SSH session to Session Manager (port 22). Use the Session Manager IP Address (172.16.255.107).
2. Log in.
3. At the Session Manager command line type traceSM -x and press Enter.
Note: The traceSM tool shows the SIP call flow in Session Manager.
It gives insight into Session Manager's decisions.
Benefit: can filter certain types of SIP messages
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
485
NEW QUESTION 22
Which statement describes Cross-Origin Resource Sharing (CORS)?
- A. It allows for signaling-groups to be used by more than one trunk-group.
- B. It is a W3C specification that allows cross-domain communication from the browser.
- C. It is making DSP resources available regardless of the originating location of a call.
- D. It is a network setup by which an Avaya Aura Media Server (AAMS) can be used by more than one Avaya Aura Communications Manager (CM).
Answer: B
Explanation:
Explanation
Cross-origin resource sharing (CORS) is a mechanism that allows restricted resources (e.g. fonts) on a web page to be requested from another domain outside the domain from which the first resource was served. A web page may freely embed cross-origin images, stylesheets, scripts, iframes, and videos.
Note on the History of CORS:
Cross-origin support was originally proposed by Matt Oshry, Brad Porter, and Michael Bodell of Tellme Networks in March 2004 for inclusion in VoiceXML 2.1 to allow safe cross-origin data requests by VoiceXML browsers.
In May 2006 the first W3C Working Draft was submitted. In March 2009 the draft was renamed to
"Cross-Origin Resource Sharing" and in January 2014 it was accepted as a W3C Recommendation.
References: https://en.wikipedia.org/wiki/Cross-origin_resource_sharing
NEW QUESTION 23
You are creating a SIP Entity for Avaya Aura Engagement Development Platform - EDP / Avaya BreezeTM.
What do you have to enter in the field labeled FQDN or IP Address?
- A. the Management IP-Address or FQDN of the Avaya BreezeTM platform.
- B. the SM100 IP-address or FQDN of the Avaya BreezeTM platform
- C. the IP-Address or FQDN of general Purpose Cluster
- D. the IP-Address or FQDN of Core Platform Cluster
Answer: A
Explanation:
Explanation
Administering an Avaya Breeze instance
Before you begin
To complete this task you will need:
* The IP address of the Avaya Breeze Management Network Interface.
This is the same IP address you used when deploying the Virtual Machine (VM).
* The IP address including the network mask, and default gateway for the Avaya Breeze Security Module.
Procedure (see step 6 below)
1. On System Manager, in Elements, click Avaya Breeze.
2. Click Server Administration.
3. In the Avaya Breeze Server Instances list, click New.
4. In the SIP Entity field, select the SIP Entity that you created.
5. Ensure that the value in the UCID Network Node ID field is unique across the solution deployment so that it does not conflict with other UCID-generating entities like Avaya Aura Communication Manager or Avaya Aura Experience Portal.
6. In the Management Network Interface FQDN or IP Address field, type the IP address of the Avaya Breeze Management Network Interface.
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 47
https://downloads.avaya.com/css/P8/documents/101014426
NEW QUESTION 24
To watch Avaya Session Border Controller for Enterprise (SBCE) messages in real-time as they pass through the SBCE, which tool on the SIP command line do you use?
- A. trace
- B. traceTOOL
- C. traceSM -m
- D. traceSBC
Answer: D
Explanation:
Explanation
The tcpdump tool is the main troubleshooting tool of Avaya SBCE, which can capture network traffic. Using tcpdump is a reliable way to analyze the information arriving to and sent from the SBC.
However, tcpdump has its own limitations, which can make troubleshooting difficult and time consuming.
This traditional tool is not useful in handling encrypted traffic and real-time troubleshooting.
The traceSBC tool offers solutions for both issues.
In Real-time mode, traceSBC must be on active Avaya SBCE. traceSBC is started without specifying a file in the command line parameters. The tool automatically starts processing the log files. The live capture can be started and stopped anytime without affecting service.
Example:
# traceSBC
References: Troubleshooting and Maintaining Avaya Session Border Controller for Enterprise (December
2015), page 27
https://downloads.avaya.com/css/P8/documents/101014063
NEW QUESTION 25
In which two locations is the Switch Password configured?
- A. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- B. In 'cti-link' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
- C. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'Switch Connection' on Avaya Aura Application Enablement Services (AES)
- D. In 'ip-services' form on Avaya Aura Communication Manager (CM) and in 'TSAPI link' on Avaya Aura Application Enablement Services (AES)
Answer: C
Explanation:
Explanation
Enabling AE Services refers to administering the transport link between Communication Manager and AE Services.
Procedure
1. Type change ip-services. Communication Manager displays the IP SERVICES form
2. Complete Page 1 of the IP SERVICES form
3. Complete Page 3 of the IP SERVICES form as follows.
a. In the AE Services Server field, type the name of the AE Services server b. In the Password field, create a password.
This is the password that the AE Services administrator must set on the AE Server (Communication Manager Interface > Switch Connections > Edit Connection > Switch Password). The passwords must exactly match on both Communication Manager and the AE Services server.
References: Avaya Aura Application Enablement Services Administration and Maintenance Guide, Release
6.3 (June 2014) , page 26
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 26
Which two options describe the purpose of TraceSM in the Avaya Aura Presence Services? (Choose two.)
- A. It captures Packet-Size statistics from every telephone call in Avaya Aura 7.
- B. It captures Contact details from every user connected to Avaya Aura Presence Services.
- C. It captures Voice and Video Calls media packets in real-time.
- D. It captures live traces for both SIP and H323/XMPP clients.
- E. It captures real-time XMPP traffic.
Answer: D,E
Explanation:
Explanation
It's important to know that traceSM is a real-time capture tool.
traceSM is an interactive perl script that allows an administrator to capture, view, and save call processing activity on a Session Manager. While not as powerful or versatile as wireshark, traceSM is absolutely essential when it comes to working with Avaya SIP. First off, it allows you to view SIP messages even if they have been encrypted with TLS.
References: https://andrewjprokop.wordpress.com/2014/06/02/a-necessary-guide-to-the-avaya-tracesm-utility/
NEW QUESTION 27
You are creating the identity certificates that must be installed in the Avaya Session Border Controller for Enterprise (SBCE).
Which statement about installing the certificate files in the SBCE is true?
- A. The cert file and the Key filenames generated by the Certificate Authority must be different.
- B. Both the PEM and Key files must be in a zip file.
- C. The cert file and the Key filenames generated by the Certificate Authority must match.
- D. The SBCE must be rebooted before the files installation.
Answer: C
NEW QUESTION 28
Which statement about the SIP Entities to support single node Avaya Aura Presence Services is true?
- A. Only one SIP Entity is built of Type = "Avaya Breeze", which uses the SM100 IP address of the Avaya BreezeTM node.
- B. Only one SIP Entity is built of Type = "Presence Services", which uses the SM100 IP address of the Avaya BreezeTM node.
- C. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Presence Services".
- D. Two SIP Entities are built to the same SM100 IP address of each node. One is of type = "Avaya Breeze", and the other is of Type = "Other".
Answer: A
NEW QUESTION 29
After the initial provisioning script has been run you see your Avaya Session Border Controller for Enterprise (SBCE) displaying a Registered state in the Web GUI. You click on the install link in the EMS System Management > Devices menu to continue the installation.
After displaying a status of Provisioning for a short while, which status does the SBCE display?
- A. Up
- B. Commissioned
- C. Maintenance-Busy
- D. Busyout
Answer: B
Explanation:
Explanation
SBC states:
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
201
NEW QUESTION 30
You are starting the process to create a server certificate so it can be installed in the Avaya Session Border Controller (SBC).
What must be done before creating a server certificate for SBC?
- A. Download a CA PEM file from System Manager.
- B. Run initTM -d from SBC CLI.
- C. Generate a Certificate Signing Request (CSR) in SBC.
- D. Add End Entity in Session Manager.
Answer: C
NEW QUESTION 31
Which configuration must be completed before configuring a TSAPI link on Avaya Aura Application Enablement Services (AES)?
- A. A Switch Connection must be configured on Avaya Aura Application Enablement Services (AES) first.
- B. A signaling-group must be configured on Avaya Aura Communication Manager (CM) first.
- C. A CTI-user must be configured on Avaya Aura Application Enablement Services (AES) first.
- D. A CTI link must be configured on Avaya Aura Communication Manager (CM) first.
Answer: D
Explanation:
Explanation
If you are administering the AE Server for TSAPI, JTAPI, DMCC with Call Control, Telephony Web Service, or an AE Services integration (Microsoft or IBM Sametime), you must administer a CTI link from Communication Manager to AE Services.
Follow these steps from a Communication Manager SAT to administer a CTI link type ADJ-IP.
Procedure
1. Type add cti-link <link number>, for example add cti-link 5.
2. Complete the CTI LINK form as follows:
a. In the Extension field, type <station extension>, for example 70001.
b. In the Type field, type ADJ-IP.
c. In the Name field, type <name of AE Server>, for example aeserver1.
References: Avaya Aura Application Enablement Services Administration and Maintenance, page 30 Guide
https://downloads.avaya.com/css/P8/documents/100171737
NEW QUESTION 32
When configuring a SIP Entity for Avaya Aura Messaging (AAM) in Avaya Aura System Manager, which Type of SIP entity needs to be selected?
- A. Avaya Aura Messaging
- B. Other
- C. Messaging
- D. Communication Manager Messaging
Answer: B
Explanation:
Explanation
Define SIP Entity
Expand Elements, Routing and select SIP Entities from the left navigation menu.
Click New (not shown). In the General section, enter the following values and use default values for remaining fields.
* Name: Enter an identifier for the SIP Entity
* FQDN or IP Address: Enter IP address of Avaya Aura Messaging.
* Type: Select "Other"
Etc.
References: Application Notes for Configuring Avaya Aura Messaging 6.1 as a Voice Messaging Solution for Avaya Aura Communication Manager 6.0.1 Feature & Evolution Server Using SIP Trunks and Avaya Aura Session Manager 6.1 - Issue 1.0 , page 22
https://www.devconnectprogram.com/fileMedia/download/08ad7375-7c2e-4767-929f-15f4e8130a0d
NEW QUESTION 33
To route calls to Avaya Aura Messaging (AAM), which routing strategy is used by Avaya Aura Session Manager (SM)?
- A. Automatic Alternate Routing (AAR)
- B. Network Routing Policies (NRP)
- C. Automatic Route Selection (ARS)
- D. Registry Routing
Answer: B
Explanation:
Explanation
Routing policies describe the conditions under which Session Manager will route calls between Communication Manager and Avaya Aura Messaging.
References: Application Notes for Configuring Avaya Aura Messaging 6.1 as a Voice Messaging Solution for Avaya Aura Communication Manager 6.0.1 Feature & Evolution Server Using SIP Trunks and Avaya Aura Session Manager 6.1 -Issue 1.0, page 25
https://www.devconnectprogram.com/fileMedia/download/08ad7375-7c2e-4767-929f-15f4e8130a0d
NEW QUESTION 34
Avaya Aura Presence Services 7.x is implemented on Avaya BreezeTM (formerly Engagement Development Platform (EDP)).
When looking at Elements > Breeze > Service Management > Services, which status would you expect for a Presence Services snap-in that is ready to support Avaya Aura Presence Services?
- A. Loaded
- B. Installed
- C. Accepting
- D. Active
Answer: C
NEW QUESTION 35
On Avaya Session Border Controller for Enterprise (SBCE), which statement about how to examine messages with Wireshark is true?
- A. You have to start and stop the .pcap file using command line.
- B. You can start and stop a Packet Capture in the EMS web GUI and then you can open the .pcap file with Wireshark.
- C. Wireshark runs directly on Avaya Session Border Controller for Enterprise (SBCE).
- D. They cannot be examined on this version.
Answer: B
Explanation:
Explanation
Viewing the Packet Capture with Wireshark.
0. Start a Packet Capture in the EMS web GUi.
1. After the capture completes, click the Capture tab.
2. Double-click on the capture file name.
3. The File Download window opens.
4. Click Open.
The Wireshark application opens the trace.
Note: The Wireshark call tracing tool can be used on virtual desktop for vLabs.
References: Avaya Aura Session Border Controller Enterprise Implementation and Maintenance (2012), page
468
NEW QUESTION 36
Which four kinds of services does the TSAPI standard provide for third-party call control over Avaya Aura Communication Manager (CM)? (Choose four.)
- A. invoking CM features
- B. completing the routing of incoming calls
- C. performing a remote reboot to the CM server
- D. receiving notifications of events
- E. controlling specific calls or stations
- F. adding new feature buttons to agent sets
Answer: A,B,D,E
Explanation:
Explanation
A: The services in the Event Report group provide a client application with the reports of events that cause a change in the state of a call, a connection, or a device.
B: The services in the call control group enable a telephony client application to control a call or connection on Communication Manager. Typical uses of these services are:
placing calls from a device
controlling a connection for a single call.
C: The services in the query group allow a client to query device features and static attributes of a Communication Manager device.
E: The services in the routing group allow Communication Manager to request and receive routing instructions for a call from a client application.
References: Avaya Aura Application Enablement Services TSAPI for Avaya Communication Manager Programmer's Reference Release 6.1, page 128
https://downloads.avaya.com/css/P8/documents/100141354
NEW QUESTION 37
In which location is the AAMS URI '[email protected]' configured?
- A. Home > Elements > Breeze > Configuration > Avaya Aura Media Server and as a Regular Expression
- B. Home > Elements > Breeze > Configuration > Avaya Aura Media Server and as a Dial Pattern
- C. Elements > Breeze > Configuration > HTTP Security and as a Dial Pattern
- D. Elements > Breeze > Configuration > HTTP Security and as a Regular Expression
Answer: A
Explanation:
Explanation
Creating the Avaya Aura Media Server Routing Pattern
Procedure
1. On System Manager, click Elements > Routing > Routing Policies.
2. Click New.
3. Type a Name for the Routing Policy.
4. From the SIP Entity as Destination field, click Select.
5. Select the Avaya Aura
Media Server SIP Entity that you created.
Select the Local Host Name FQDN SIP Entity if you are using High Availability for the Avaya Aura Media Server routing.
6. Click Commit.
7. Navigate to Home > Elements > Routing > Regular Expressions and click New.
8. In the Pattern field, type ce-msml@<sip-domain>.*
This sip-domain value must match:
* The SIP domain that you entered in the Home > Elements > Routing > Domains page.
* The default SIP domain that you entered on the Avaya BreezeTM Cluster Administration page.
9. Click Commit
https://downloads.avaya.com/css/P8/documents/101014426
References: Deploying Avaya Breeze, Release 3.1, (September 2016), page 55
NEW QUESTION 38
......
Authentic Best resources for 71300X Online Practice Exam: https://www.dumpstorrent.com/71300X-exam-dumps-torrent.html