Excellent ASD01 PDF Dumps With 100% DumpsTorrent Exam Passing Guaranted [Aug-2021]
100% Pass Your ASD01 Designing Blue Prism Process Solutions (EN) at First Attempt with DumpsTorrent
NEW QUESTION 10
A process definition document has been produced for a process that interfaces with two applications FirstApp and Customer Information (CI) The process requirement is to perform data extraction from FirstApp before performing a number of steps in the CI application.
It is estimated that to perform the daily case volume within SLA's will require 10 robots Average license time is approximately 10 minutes, with the FirstApp steps requiring only 1 minute to perform.
The client has a limited number of licences for the FirstApp application and is reluctant to use 10 of these licenses to automate the process.
Which of the below is a valid design option for the project?
- A. Automate the end to end process using a single Blue Prism process which will be run on 10 robots
- B. Automate the end to end process using two Blue Prism processes. Process 1 will perform the FirstApp tasks. Process 2 will perform the CI tasks Data will be passed from Process 1 to Process 2 via a Blue Prism Work Queue Process 1 will run on a single robot, with Process 2 running on 9 robots.
- C. Automate the end to end process using a single Blue Prism process which will only be run on a single robot.
- D. Automate the end to end process using two Blue Prism processes Process 1 will perform the FirstApp tasks. Process 2 will perform the CI tasks. Data will be passed from Process 1 to Process 2 via a spreadsheet. Process 1 will run on a single robot, with Process 2 running on 9 robots.
Answer: B
NEW QUESTION 11
A process definition document has been produced for a process that interfaces with two applications: FirstApp and Customer Information (CI). The process requirement is to perform data extraction from FirstApp before performing a number of steps in the CI application.
It is estimated that to perform the daily case volume within SLA's will require 10 robots. Average case time is approximately 10 minutes, with the FirstApp steps requiring only 1 minute to perform.
The client has a limited number of licenses for the FirstApp application and is reluctant to use 10 of these licenses to automate the process.
Which of the below is a valid design option for the project?
- A. Automate the end to end process using two Blue Prism processes. Process 1 will perform the FirstApp tasks, Process 2 will perform the CI tasks. Data will be passed from Process 1 to Process 2 via a Blue Prism Work Queue. Process 1 will run on a single robot, with Process 2 running on 9 robots.
- B. Automate the end to end process using single Blue Prism process which will be run on 10 robots.
- C. Automate the end to end process using two Blue Prism processes. Process 1 will perform the FirstApp tasks, Process 2 will perform the CI tasks. Data will be passed from Process 1 to Process 2 via a spreadsheet. Process 1 will run on a single robot, with Process 2 running on 9 robots.
- D. Automate the end to end process using single Blue Prism process which will only be run on a single robot.
Answer: C
NEW QUESTION 12
If a solution is to make use of a queue with Maximum Attempts greater than 1, what should the designer put in place? (Choose two.)
- A. Logic to identify the progress made by previous attempts to work a case.
- B. A decision whether or not to use an available retry item before marking an item complete.
- C. A decision whether or not to use an available retry item after marking an item as an exception.
- D. Logic to ensure that the next attempt to work a case is executed on a different machine from the previous attempt.
- E. Logic to ensure that the next attempt to work a case is executed on the same machine as the previous attempt.
Answer: B,E
NEW QUESTION 13
You are the Lead Developer tasked with delivering four processes for the same client. You have enough developers in the team to develop all the processes in parallel. All the processes have one application in common, another application is used by two processes and one process uses an application that none of the others do. Which of the following statements is true?
- A. Other than the standard utilities, there should be 3 objects.
- B. Other than the standard utilities, there should be 7 objects.
- C. Other than the standard utilities, there should be 4 objects.
- D. It's not possible to determine how many objects there should be.
Answer: D
NEW QUESTION 14
Pacific West Banking has a payments process that automatically receives pending payments from multiple regions into their payment system (Paytex).
Paytex contains a queue of cases awaiting payment. When processing the case manually an agent must use two other systems, the core banking system (DataPlus) and online account checker (FireWire).
The manual processing must perform the following steps:
* Open the next case where the status is null in Paytex
* Set the status to "In Progress" in Paytex
* Validate source account in DataPlus
* Confirm source funds in DataPlus
* Check for fraud flags in Paytex
* Confirm recipient IBAN details in Firewire
* Perform payment in Paytex
* Update case in Paytex queue. Add payment confirmation number to case and set status to "Completed"
* Where cases cannot be fulfilled due to validation errors (e.g. invalid account details, insufficient funds, suspected fraud etc.) the customers will be contacted by the agent to resolve.
A proposed Blue Prism solution with the following properties has been created to automate the payment processing:
* There will be one Blue Prism process that will perform the steps described above.
* Where a case is an exception the status will be set in Paytex to "Manual Review" in order that the manual team can pick up the case from Paytex and contact the customer and conclude the case.
* It is anticipated that to meet the SLAs of the expected volumes up to 5 instances of the Blue Prism process will be required to run concurrently.
* A Blue Prism work queue will be used to host the payments. The queue will be configured for only 1 attempt per case and the key will be (region) & {source account number}.
* The process will be started by the scheduler at 06:00 and will stop at 05:50.
Which of the following are correct? (Choose three.)
- A. There is a risk that a payment can be duplicated.
- B. The process should not be designed to use a Blue Prism Work Queue but use Paytex as the work queue.
- C. The solution exposes sensitive personal information.
- D. There is a risk that a payment can be orphaned.
- E. The process will not scale i.e. you cannot run multiple instances at the same time.
- F. The process should not be automated as it uses a third party web application.
Answer: B,C,E
NEW QUESTION 15
Which of the following statements about using Work Queue designs to split a business process into a multi part robotic solution is correct?
1. Using multiple Work Queues and Processes for the different stages of the business process is a valid design option to split a business process into a multi part robotic solution.
2. Using a single Work Queue and deferring cases for future processing is a valid design option to split a business process into a multi part robotic solution.
3. Using an item's status to control when to work it is a valid design option to split a business process into a multi part robotic solution.
4. You cannot split a business process into a multi part robotic solution.
- A. 1 and 3
- B. 4 only
- C. 1 and 2 Only
- D. 1, 2 and 3
Answer: A
NEW QUESTION 16
Consider the following high-level design. The solution is intended to read medical data from one application in order to update another An input file is prepared by an overnight batch run for the solution to work through each morning before patients arrive. Usually the input file is fairly small but at certain times each month the file is much larger.
Which of these options should be considered by the process solution designer to guarantee the quality of the end-to-end solution? (select 4 responses)
- A. The solution should log in to the applications before starting the case working loop
- B. The file should be updated after each case to indicate that the case has been worked.
- C. The solution should log out from applications after exiting working loop.
- D. The batch run should create multiple input files so that each Resource PC has its own file to work with
- E. The file should be updated at the start of each case to prevent other RPCs from working it.
- F. The solution should use an environment lock to ensure the file can only be accessed by one Resource PC at a time.
- G. Once in production the clinic should wait until the solution has completed before admitting patients
- H. Once in production the process controller should ensure that the process is only ever run on one Resource PC
- I. Each Resource PC should be set to take a different row from the others, e, g. RPC-A works rows t, 4, 7,
10 etc., RPC-B works 2, 5. 8 etc and RPC-C works 3, b, 9 etc. - J. The solution should start by loading the file data into a work queue.
- K. The solution should split the file into pieces to distribute to each Resource PC.
Answer: A,E,F,J
NEW QUESTION 17
Imagine you are designing the application integration logic for a solution. One of the applications involved is one you have not automated before but it is widely used and the project is the first in a series for this client.
Which of the following are valid considerations when designing business objects? (select 2 responses)
- A. It's best that objects are designed to be reusable and are not made bespoke for one process.
- B. The first Production process to automate an application should not share its integration logic with any other because there will invariably be teething problems during an initial implementation.
- C. When an application is automated for the first time a single business object should be used to isolate the first process from any that follow.
- D. Any new application should be assessed to find the appropriate integration technique and identify any potential technical issues.
- E. It's best that each process uses its own business objects to keep it separate from any other.
Answer: A,D
NEW QUESTION 18
VivaBank have an account closure process that can take up to three days to close an account. All requests within the bank's core system to close an account take place overnight during batch processing. There are two scenarios:
The timings relate to the expected automation time.
All requests will arrive in a Blue Prism work queue from multiple channels using either web services or other Blue Prism processes.
The following detail from the Functional Requirement Questionnaire must be considered:
* Cases must be processed on the same day if they come in between 08:00 and 22:00 Monday to Friday
* Exception cases are to be emailed to the manual team during processing as and when they occur.
* It is expected that up to 200 cases can be expected per day.
The Blue Prism solution consists of four processes and four Blue Prism Work Queues.
Cases come into the Account Closures Work Queue and are processed by the Account Closure process which determines if they are "Nil Balance" or "Balance to Transfer" scenarios. Before adding the case to the relevant work queue, a check is made to see if an identical key has been added to the work queue today. If so the case is not added.
The Transfer Balance process work its queue and, for each successfully processed case, adds case to the Close Account queue.
The Close Account process works its queue and, for each successfully processed case, adds a case to the Confirm Closure queue with the case deferred to 08:00 the next day.
The Confirm Closure process completes the sequence by confirming that the account is finally closed.
A scheduler has been created to start all four processes at 08:00. Each process shall be configured to finish accordingly:
Please select from the statements below the ones you consider to be correct. (Choose two.)
- A. As an alternative the solution could use just one queue instead of four.
- B. All processes should be merged into one process to optimize licenses.
- C. There should be a separate work queue for each channel feeding the process.
- D. The Confirm Closure process should work until 22:00.
- E. Exception cases should not be distributed whilst the processes are running and instead should be distributed when each process has completed.
Answer: C,D
NEW QUESTION 19
A process is required for a telecoms company to work cases supplied via a daily Excel file. Although the file will only contain around 1000 rows, the average case time is such that the workload is far too big for one machine to complete in a day, so the solution has been designed with multiple machines in mind. One machine will load the work queue while the others wait, then once the queue is ready all machines will work it together.
The requirements state that the input file is machine generated, has a known format, is generally clean but may contain exceptions - rows with an empty cell, partial phone numbers, or accounts that don't exist.
What should the solution do to combat this problem?
- A. The solution should read the file and load the queue without validating the data. The data validation should be the first step in working a queue item, with invalid cases marked as exceptions.
- B. The solution should open the file and delete any row with either missing, incomplete or invalid data.
Then the 'clean' file should be read and the resulting collection added to the queue. - C. The solution read the file and then loop through the resulting collection and discard any row with either missing, incomplete or invalid data. Then the 'clean' collection should then be loaded into the queue.
- D. The solution should validate the data and check that the accounts exist in the target applications beforehand, so that only clean cases are loaded into the queue.
- E. The solution should apply a filter to the Excel file to hide any row with empty cells and only load the complete rows.
Answer: C
NEW QUESTION 20
A retail bank has promoted 2 Blue Prism processes to production:
1. Email poller
2. Customer onboarding
3. Direct Debit Cancellations
One instance of the email poller process will run 24/7 feeding work queues for the other two processes.
Three instances of the Customer onboarding process will run between 6am and 11pm each day on three separate VMs.
One instance of the Direct Debit Cancellations process will run between 6am and 4pm each day on the same VM as the Email poller process.
What is the maximum number of Blue Prism licenses that will be consumed each day?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 21
You are the Lead Developer tasked with delivering four processes for the same client. You have enough developers in the team to develop all the processes in parallel. All the processes have one application in common, another application is used by two processes and one process uses an application that none of the others do.
Which of the following statements is true?
- A. Other than the standard utilities, there should be 7 objects.
- B. Other than the standard utilities, there should be 3 objects.
- C. Other than the standard utilities, there should be 4 objects.
- D. It's not possible to determine how many objects there should be.
Answer: A
NEW QUESTION 22
MedBank have recently introduced a new Credit Card platform Cred+. There is a requirement to migrate account and card details from the existing banking platform PCBS on to Cred+.
Account IDs of the cases requiring data transfer will be held on a SQL database. The requirement is that, for each account ID specified on the SQL database, the following data must be read from the PCBS application and input into the Cred+ application:
* Account ID
* Product Type
* Name
* Address
* Date of Birth
* Card PAN (Primary Account Number or credit card number)
* Card Issue Date
* Card Expiry Date
Once the data has been successfully input into Cred+ the correct record on the SQL database will be updated to indicate data transfer is complete. All work queues will be encrypted, however due to the sensitivity of the data, MedBank insist that a single robot account does not have access to both PCBS and CRED+ systems.
The following high level design has been proposed:
Which of the following statements about the solution design are correct? (Choose two.)
- A. To reduce the elapsed time of the end to end process, the Get Cases process should be run across multiple machines.
- B. The solution enables multiple instances of the Get PCBS Data and Update Cred+ processes to run without risk of collision.
- C. If the PCBS application suffers an outage, all Blue Prism processes specified in this design must stop processing immediately.
- D. There is a risk that the outcome of a data transfer will not be recorded in the SQL database.
- E. The Process Get PCBS Data should be stopped if the Cred+ application suffers an outage to prevent a backlog of cases in the PCBS Data work queue.
- F. Such sensitive data should not be stored in a Blue Prism work queue.
Answer: B,E
NEW QUESTION 23
Which of the following statements about Blue Prism and Web Services is correct?
- A. Only Blue Prism Business Objects can be exposed as a Web Service
- B. Both Blue Prism Processes or Business Objects can be exposed as a Web Service
- C. Only Blue Prism Processes can be exposed as a Web Service
- D. Neither Blue Prism Processes or Business Objects can be exposed as a Web Service
Answer: C
NEW QUESTION 24
MedBank have recently introduced a new Credit Card platform Cred+. There is a requirement to migrate account and card details from the existing banking platform PCBS on to Cred+.
Account IDs of the cases requiring data transfer will be held on a SQL database. The requirement is that, for each account ID specified on the SQL database, the following data must be read from the PCBS application and input into the Cred+ application:
* Account ID
* Product Type
* Name
* Address
* Date of Birth
* Card PAN (Primary Account Number or credit card number)
* Card Issue Date
* Card Expiry Date
Once the data has been successfully input into Cred+ the correct record on the SQL database will be updated to indicate data transfer is complete. All work queues will be encrypted, however due to the sensitivity of the data, MedBank insist that a single robot account does not have access to both PCBS and CRED+ systems.
The following high level design has been proposed:
Which of the following statements about the solution design are correct? (Choose two.)
- A. To reduce the elapsed time of the end to end process, the Get Cases process should be run across multiple machines.
- B. The solution enables multiple instances of the Get PCBS Data and Update Cred+ processes to run without risk of collision.
- C. If the PCBS application suffers an outage, all Blue Prism processes specified in this design must stop processing immediately.
- D. There is a risk that the outcome of a data transfer will not be recorded in the SQL database.
- E. The Process Get PCBS Data should be stopped if the Cred+ application suffers an outage to prevent a backlog of cases in the PCBS Data work queue.
- F. Such sensitive data should not be stored in a Blue Prism work queue.
Answer: B,E
NEW QUESTION 25
ProSafe credit reference agency retrieves data from bank and other credit providers where customers have missed payments or gone into default. The data is very sensitive and fed directly into a Blue Prism work queue via a web service. Blue Prism process must process the data within 4 hours. The Blue Prism solution runs continuously and each case takes approximately 30 seconds to process. It is expected that an average of 10,000 cases per day will be required and up to 10 Blue Prism robots are available. The Blue Prism solution is sown below:
For each case of the process will access the customer account in the HotRisk system and, where an account exists, harvest the data which will be fed along with the Work Queue data into a rules engine. The rules engine is a Blue Prism process that does not interact with any target system. It merely consumes data and, via a complicated series of decision and choice stages, determines the new customer risk factor.
There is to be no scheduler used. Instead the Process Controllers who work in shifts to provide 24 hour support will stop and start process instances in line with Work Queue volumes.
As a Blue Prism process solution designer, who is reviewing the solution, which of the following would concern you? (Choose three.)
- A. The rules engine has been built in a process not an object.
- B. There is no scheduler.
- C. The data is too sensitive for automated processing.
- D. The process does not have an end stage.
- E. The process opens and closes the HotRisk system for each case.
- F. The solution is not scalable.
Answer: B,E,F
NEW QUESTION 26
Consider the following steps for a theoretical manual process.
* Check in input folder any new files.
* If there are no files check again later as files can arrive anytime, and there is no limit to the number of files that may come.
* Open the next available file.
* Take the first case.
* Start System X and find the case details.
* If the case can't be found, move to the next one.
* After finding the case in System X, fetch additional case details from System Y.
* Again if the case can't be found, move to the next one.
* Analyse all the data to see if System Z should be updated.
* If the data does not meet the requirements, add notes indicating this to System X and Y and move to the next case.
* If the data does meet the requirements, update the case in System Z.
* Add notes to System X and Y and move to the next case.
* At the end of the file, go back and look for another.
* Stop checking for new files at 16:00 and finish any remaining cases.
* When all work is complete create a report of the day's exception cases.
* Close down Systems X, Y and Z.
If it is possible that there are long intervals between files arriving, what are the alternatives the process should take to control System X, System Y and System Z? (Choose two.)
- A. Minimize them to keep the desktop clear.
- B. Stop them from timing out by keeping them active while waiting for files.
- C. Close Y and Z down but keep X open because it is the first application needed to work a case.
- D. Nothing, just leave them logged in until more work arrives.
- E. Log out while waiting and log back in when a file arrives.
- F. Nothing because they will not have been started if no files have arrived yet.
Answer: D,E
NEW QUESTION 27
Which of the following statement combinations about Blue Prism memory management is correct?
- A. A Blue Prism Process holds a Business Object in memory for the duration of its run.A Blue Prism Process reads a Sub Process into memory as required. Once the called Sub Process is complete, the Process releases the memory for the .Net Garbage Collector to reclaim.
- B. A Blue Prism Process holds a Sub Process in memory for the duration of its run.A Blue Prism Process holds a Business Object in memory for the duration of its run.
- C. A Blue Prism Process reads a Business Object into memory as required. Once the called Action is complete, the Process releases the memory for the .Net Garbage Collector to reclaim.A Blue Prism Process reads a Sub Process into memory as required. Once the called Sub Process is complete, the Process releases the memory for the .Net Garbage Collector to reclaim.
- D. A Blue Prism Process holds a Business Object into memory as required.Once the called Action is complete, the Process releases the memory for the .Net Garbage Collector to reclaim.
Answer: C
NEW QUESTION 28
Consider the following high-level design.
The application concerned is prone to being sluggish or even unresponsive at times. As the solution designer you should anticipate that there will be system exceptions and that after an exception case the application might not be in an ideal state.
What should you do? (Choose three.)
- A. Instruct the developer to build objects capable of navigating the application back to the home position.
- B. Kill the application after each case and log back in to ensure the next case starts in the right position.
- C. Add 'clean up' logic to get the application in the right position before Work Step1.
- D. Move Log Into Application to be before Work Step1 and move Log Out of Application to be after Step3.
- E. Restart the application if attempts to navigate back to the home position fail.
- F. Add 'clean up' logic to get the application in the right position after Apply Queue Item Result.
- G. Add 'clean up' logic to get the application in the right position after Work Step3.
Answer: A,B,F
NEW QUESTION 29
Which of the following accurately describes best practice when work is sourced from an application's workflow system?
- A. Blue Prism cannot source work from an application's workflow system
- B. When sourcing work from an applications workflow system, case data should be stored in an excel document
- C. Even though there is a workflow system managing and allocating work, a Blue Prism Work Queue should still be used
- D. There is no need to use a Blue Prism queue as workflow is managed within the application
Answer: D
NEW QUESTION 30
Which of the following statements about using Work Queue designs to split a business process into a multi part robotic solution is correct?
1. Using multiple Work Queues and Processes for the different stages of the business process is a valid design option to split a business process into a multi part robotic solution.
2. Using a single Work Queue and deferring cases for future processing is a valid design option to split a business process into a multi part robotic solution.
3. Using an item's status to control when to work it is a valid design option to split a business process into a multi part robotic solution.
4. You cannot split a business process into a multi part robotic solution.
- A. 1 and 3
- B. 4 only
- C. 1 and 2 Only
- D. 1, 2 and 3
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 31
The following Object Design has been created for a mainframe banking application.
Which of the following statements about the Object design above are correct? (select 2 responses)
- A. The design complies with Blue Prism design best practice.
- B. There is no need for attach actions to be replicated across all the objects.
- C. The object design facilitates a scalable design that will reduce the impact of change when the object layer needs altering
- D. The Add Note action in the "BankHost - Notepad" business object does not require an input for Type as the process definition document states that Information' will always be selected for this process.
- E. The object design should be simplified by storing all BankHost actions in the same object
Answer: A,C
NEW QUESTION 32
Which of the following statements about using Work Queue designs to split a business process into a multi part robotic solution is correct?
1. Using multiple Work Queues and Processes for the different stages of the business process is a valid design option to split a business process into a multi part robotic solution
2 Using a single Work Queue and deferring cases for future processing is a valid design option to split a business process into a multi part robotic solution
3. Using an item's status to control when to work it is a valid design option to split a business process into a multi part robotic solution
4. You cannot split a business process into a mufti part robotic solution
- A. 4 only
- B. 1 and 3
- C. 1 and 2 Only
- D. 1, 2 and 3
Answer: D
NEW QUESTION 33
......
Trend for ASD01 pdf dumps before actual exam: https://www.dumpstorrent.com/ASD01-exam-dumps-torrent.html