Oct 23, 2023 Detailed New C_IBP_2305 Exam Questions for Concept Clearance
C_IBP_2305 Exam Preparation Material with New C_IBP_2305 Dumps Questions.
SAP C_IBP_2305 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
NEW QUESTION # 42
You are invited to review a problem with a customer's SAP IBP Excel template performance.What areas with the biggest potential performance impact would you focus on?Note: There are 2 correct answers to this question.
- A. Complex calculation graphs for key figures
- B. Number of analytics charts displaying key figures' values
- C. Number of local members and complexity of calculations
- D. Excessive SAP IBP formatting in the Microsoft Excel UI
Answer: A,D
NEW QUESTION # 43
Which features apply to quota violations modeled with the optimizer?
- A. Quotas can be modeled for sourcing location, production, and consensus demand.
- B. Min and Max Quotas have to be the same as sourcing ratios.
- C. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
- D. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
Answer: C
NEW QUESTION # 44
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks are imposed when modeling cross-period calculations.
- B. Filter blocks are imposed when modeling attribute transformations.
- C. Filter blocks can be visualized in the Key Figure Calculations app.
- D. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
- E. Filter blocks are imposed when modeling an attribute as a key figure.
Answer: B,D,E
NEW QUESTION # 45
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer and supply heuristics
- B. Finite and infinite heuristics
- C. Finite heuristics only
- D. Supply optimizer only
Answer: A
NEW QUESTION # 46
Safety Stock outputs from Multistage Inventory Optimization are sent to which of these processes? Note:
There are 2 correct answers to this question.
- A. Charts creation in SAP Supply Chain Control Tower
- B. Supply Heuristics in SAP IBP for sales and operations
- C. Decoupling Points determination in SAP IBP for demand-driven replenishment
- D. Demand Sensing with Gradient Boosting (Full)
Answer: B,D
NEW QUESTION # 47
What actions can be performed in the Advanced Dashboards application?Note: There are 3 correct answers to this question.
- A. Link two analytics charts.
- B. Display all assigned analytics on a single UI.
- C. Rename the charts.
- D. Use drill-down functionality.
- E. Add process templates.
Answer: B,D,E
NEW QUESTION # 48
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note: There are 3 correct answers to this question.
- A. Aggregated constraints
- B. Adjusted transport receipts
- C. Transportation lead times
- D. Minimum lot size
- E. Maximum lot size
Answer: B,C,E
NEW QUESTION # 49
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Supply chain graph in Supply Chain Network app
- B. Jobs in the Applications Jobs app
- C. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: B,D
NEW QUESTION # 50
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. You can add (or delete) planning objects to a planning view after these filters are applied.
- B. You can only apply one value-based filter per planning view.
- C. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- D. These filters can be used together with attribute totals in the same planning view.
- E. These filters are always applied based on the values stored in the database.
Answer: B,C,E
NEW QUESTION # 51
You are reviewing the master data types that are often used for supply and inventory planning
.Which master data types are compound master data types?Note: There are 2 correct answers to this question.
- A. SOURCECUSTGROUP
- B. SOURCEPRODUCTION
- C. SOURCECUSTOMER
- D. SOURCELOCATION
Answer: C,D
NEW QUESTION # 52
What do you need to be aware of when using multiple pairs of key figures in one copy operator? Note: There are 2 correct answers to this question.
- A. Copying multiple key figures can be processed sequentially.
- B. If necessary target key figures values are disaggregated.
- C. If necessary source key figures values are disaggregated.
- D. Copying multiple key figures on different planning levels is not possible.
Answer: A,C
NEW QUESTION # 53
You are developing the functionality and appearance of the Excel UI for SAP IBP business users.Which extensibility capabilities for SAP IBP, add-in for Microsoft Excel are provided by Custom VBA coding?Note:
There are 2 correct answers to this question.
- A. SAP IBP ribbon extension
- B. Changing the layout of the master data workbooks
- C. Changing the member names
- D. Changing the entries from the Name Manager
Answer: A,B
NEW QUESTION # 54
Which of these conditions must be met to create a Local Member key figure?Note: There are 2 correct answers to this question.
- A. Users should have authorization for template administration.
- B. Activate Local Member Recognition setting is selected.
- C. Use Excel Cell References in the Report Editor option is selected.
- D. A key figure is selected in the Key Figures tab in the SAP IBP, add-in for Microsoft Excel.
Answer: A,B
NEW QUESTION # 55
Which of the following are features of lag-based snapshots?Note: There are 2 correct answers to this question.
- A. Lag-based snapshots are created in the Configuration app for a fixed time range.
- B. The number of lag-based snapshots are limited to nine levels.
- C. Target key figures for these snapshots are exposed to the user in planning views.
- D. Target key figures for these snapshots must have lag as a root attribute in its base planning level.
Answer: A,D
NEW QUESTION # 56
For which of the following application jobs can you enter planning filters as parameters?Note: There are 2 correct answers to this question.
- A. Purge Non-Conforming Data
- B. Purge Key Figure Data
- C. Create Time Periods for Time Profiles
- D. Purge Master Data
Answer: B,D
NEW QUESTION # 57
Which SAP IBP planning operator can be run to delete planning objects in a certain version?
- A. Purge Master Data
- B. Purge Key Figure Data Outside Planning Area Planning Horizon
- C. Purge Key Figure Data
- D. Purge Non-Confirming Data
Answer: C
NEW QUESTION # 58
Which of the following data can be tracked using a change-history-enabled key figure?Note: There are 3 correct answers to this question.
- A. Attributes
- B. Modified date
- C. Reason code
- D. Scenario ID
- E. Key figure type
Answer: A,B,C
NEW QUESTION # 59
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Demand sensing of demand data using predictive analytics tools
- B. Embedded, on-the-fly demand analytics
- C. Consideration of demand-driven analysis for buffer positioning.
- D. Detailed statistical analysis of demand data using predictive analytics tools
Answer: B,D
NEW QUESTION # 60
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.
- A. The key figure is calculated and system editable.
- B. The key figure is calculated and all editable.
- C. The key figure is stored and system editable.
- D. The key figure is stored and all editable.
Answer: D
NEW QUESTION # 61
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?Note: There are 3 correct answers to this question.
- A. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
- B. It checks whether the sourcing in the Production Source Item Master Data type exists.
- C. It checks whether the required planning level master data exists for a subset of input key figures.
- D. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- E. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
Answer: C,D,E
NEW QUESTION # 62
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.
- A. Processing mode
- B. Discretization
- C. Global cost factors
- D. Time profile level
Answer: A,C
NEW QUESTION # 63
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A unit of measure key figure, such as UOM CONVERSION FACTOR
- B. A special key figure marked as an aggregate key figure (aggregate constraint)
- C. A currency conversion key figure, such as exchange rate
- D. A forecast metric key figure, such FCSTMAPE
Answer: A,B
NEW QUESTION # 64
Which constraints are taken into account by the Time-Series-Based Supply Planning Heuristic (Infinite)?Note:
There are 3 correct answers to this question.
- A. Aggregated constraints
- B. Adjusted transport receipts
- C. Transportation lead times
- D. Minimum lot size
- E. Maximum lot size
Answer: B,C,E
NEW QUESTION # 65
What are some of the prerequisites for configuring a planning area that results in a successful consistency check?Note: There are 2 correct answers to this question.
- A. Configure at most two input key figures on the same planning level in a key figure calculation.
- B. Assign the compound master data type and its component master data types.
- C. Specify a planning horizon in the planning area for each level of the assigned time profile.
- D. Configure at least one calculated key figure for the planning area.
Answer: B,C
NEW QUESTION # 66
......
C_IBP_2305 2023 Training With 86 QA's: https://www.dumpstorrent.com/C_IBP_2305-exam-dumps-torrent.html
SAP C_IBP_2305 Certification Exam Questions: https://drive.google.com/open?id=12DYAK7Rvi35eRM2o4WucreHFwpuHMphQ