[Oct-2021] The Best IBM Certified Associate Analyst C1000-018 Professional Exam Questions [Q32-Q55]

Share

[Oct-2021] The Best IBM Certified Associate Analyst C1000-018 Professional Exam Questions

Try 100% Updated C1000-018 Exam Questions [2021]

NEW QUESTION 32
Which are the supported protocol configurations for Check Point integration with QRadar? (Choose two.)

  • A. CHECKPOINT REST API
  • B. OPSEC/LEA
  • C. JDBC
  • D. SFTP
  • E. SYSLOG

Answer: B,E

 

NEW QUESTION 33
What are anomaly detection rules used for?

  • A. Detecting when unusual traffic patterns occur in the network.
  • B. Detecting event traffic.
  • C. Detecting volume changes that occur in regular patterns.
  • D. Detecting an activity that is greater or less than a specified range.

Answer: C

 

NEW QUESTION 34
Which considering the ability to tune False Positives with the Confidence factor Setting, which statement applies?

  • A. Secure areas should have a lower confidence value, while less secure areas should have a higher confidence value.
  • B. When setting a confidence factor, using a higher value will result in a higher number of Offenses.
  • C. To ensure that the results are comparable, it is important to apply a common Confidence Factor across all network segments.
  • D. Secure areas should have a higher confidence value, while less secure areas should have a lower confidence value a higher,,

Answer: D

 

NEW QUESTION 35
How does an analyst view which rule triggered an Offense in the Offense summary page?

  • A. Actions -> View Rules
  • B. Display -> Triggered Rules
  • C. Display -> Rules
  • D. Actions -> Display Rules

Answer: C

 

NEW QUESTION 36
When ordering these tests in an event rule, which of them is the best test to place at the top of the list for rule performance?

  • A. When the source is [local or remote]
  • B. When the event(s) were detected by one or more of [these log sources]
  • C. When an event matches all of the following [Rules or Building Blocks]
  • D. When the destination is [local or remote]

Answer: A

 

NEW QUESTION 37
What is a valid offense naming mechanism?
This information should:

  • A. set the naming of the associated offense(s).
  • B. replace the naming of the associated offense(s).
  • C. be included in the naming of the associated offense(s).
  • D. set or replace the naming of the associated offense(s).

Answer: A

Explanation:
Explanation
Under "Offense Naming", check "This information should
contribute to the name of the associated offense(s)".

 

NEW QUESTION 38
An analyst has been assigned a number of Offenses to review and a new event occurs. review and manage.
While reviewing an inactive offense, a new event occurs.
Which statement applies to the Offense?

  • A. The event is added to the Offense and the status is changed to Dormant.
  • B. The event is added in a new Offense that is created.
  • C. The rule that created the Offense is temporarily halted.
  • D. The event is added to the Offense and the status is changed to Active.

Answer: A

 

NEW QUESTION 39
Which QRadar component stored Offenses?

  • A. Event Collector
  • B. Console
  • C. Data Node
  • D. Event Processor

Answer: C

Explanation:
Explanation
QRadar Data Node
Data Nodes enable new and existing QRadar deployments to add storage and processing capacity on demand as required. Data Nodes help to increase the search speed in your deployment by providing more hardware resources to run search queries on.

 

NEW QUESTION 40
What information is included in flow details but is not in event details?

  • A. Log source information
  • B. Number of bytes and packets transferred
  • C. Magnitude information
  • D. Network summary information

Answer: D

Explanation:
Explanation
Flows represent network activity by normalizing IP addresses, ports, byte and packet counts, and other data, into flow records, which effectively are records of network sessions between two hosts.

 

NEW QUESTION 41
What is the procedure to re-open a closed Offense?

  • A. Activate the Offense in the action/re-open drop down menu of the Offense tab.
  • B. A closed Offense cannot be re-opened.
  • C. Activate the Offense in action/re-open drop down menu in the Admin tab.
  • D. Wait for new events/flows that will re-open the closed Offense.

Answer: B

Explanation:
Explanation
Not possible to reopen a closed offense.

 

NEW QUESTION 42
QRadar collects information from numerous log sources and other agents. Sometimes these agents stop reporting to QRadar for a variety of reasons. There is a default rule in QRadar to help identify these cases called the Device Stopped Sending Events (DSSE) Rule.
What does the DSSE Rule do?

  • A. It checks for log sources which are reporting that they have not had any communication in a certain amount of time.
  • B. It checks for Rules which have fired due to an absence of Events.
  • C. It runs when there is an absence of Events.
  • D. It listens for log sources that send out regular health events and triggers the Rule when encountered

Answer: A

 

NEW QUESTION 43
When an Offense is triggered, it only shows the events that triggered the Offense. The analyst wants to investigate further to see more events around the incident, not only those that triggered the Offense. The analyst clicks on the event count and sees the events belonging to the Offense.
How can the analyst processed to see a more detailed picture of what occurred?

  • A. Right-click on the source IP, and choose View in DSM Editor.
  • B. Right-click on the source IP, and choose More Options, then Information, and then Search Events
  • C. Right-click on the destination IP, and choose More Options, then Raw Events.
  • D. Right-click and filter on the Destination IP.

Answer: A

 

NEW QUESTION 44
While creating a new custom property, which is a valid property types selection?

  • A. Event Based
  • B. AQL Based
  • C. Flow Based
  • D. Regular Expressions Based

Answer: D

 

NEW QUESTION 45
An analyst needs to review additional information about the Offense top contributors, including notes and annotations that are collected about the Offense.
Where can the analyst review this information?

  • A. In the bottom portion of the Offense main view
  • B. In the bottom portion of the Offense Summary window
  • C. In the top portion of the Offense Summary window
  • D. In the top portion of the Offense main view

Answer: A

 

NEW QUESTION 46
The graph below shows a time series of a value. A rule has been created which will trigger at the indicated point.

Which type of QRadar rule has been used?

  • A. Anomaly Rule
  • B. Common Rule
  • C. Threshold Rule
  • D. Behavioral Rule

Answer: C

 

NEW QUESTION 47
An analyst needs to find all events that are creating offenses that are triggered by rules that contain the word suspicious in the rule name.
Which query can the analyst use as a working sample?

  • A. SELECT LOGGEDOFFENSE(logsourceid), * from offense_events where RULENAME(creeventlist) ILIKE ,%suspicious%'
  • B. SELECT LOGSOURCERULES(logsourceid), " from rule_events where RULENAME(creeventlist) ILIKE '%suspicious%'
  • C. SELECT LOGSOURCENAME(logsourceid), * from events where RULENAME(creeventlist) ILIKE
    ,o/0suspicious%'
  • D. SELECT LOGSOURCETYPE(logsourceid), - from log_events where RULENAME(creeventlist) ILIKE '%suspicious%'

Answer: C

 

NEW QUESTION 48
Which graph types are available for QRadar SIEM reports? (Choose two)

  • A. Histogram
  • B. Frequency curve
  • C. Trivial curve
  • D. Pie
  • E. Stacked Bar

Answer: D,E

Explanation:
Explanation
https://www.ibm.com/docs/en/qsip/7.4?topic=management-graph-types

 

NEW QUESTION 49
An analyst is investigating a series of events that triggered an Offense. The analyst wants to get more detailed information about the IP address from the reference set.
How can the analyst accomplish this?

  • A. Click on Searches tab then perform an Advanced Search
  • B. Click on Log Activity tab then perform a Quick Search
  • C. Click on Log Activity tab then perform an Advanced Search
  • D. Click on Searches tab then perform a Quick Search

Answer: A

 

NEW QUESTION 50
An analyst wants to find all events where Process name includes reference to exe files. Which quick search will return the expected result?

  • A. /Process name/ AND /.*exe/
  • B. /Process name/AND (/exe) )
  • C. (Process name) AND /.*exe/
  • D. "Process name" AND "*exe"

Answer: B

 

NEW QUESTION 51
An analyst wants to analyze the long-term trending of data from a search.
Which chart would be used to display this data on a dashboard?

  • A. Bar Graph
  • B. Pie Chart
  • C. Scatter Chart
  • D. Time Series chart

Answer: B

 

NEW QUESTION 52
There are 5 authentication servers that report to different Event Processors. There is a requirement to generate an Offense if there are 5 consecutive failed logins detected across any of the 5 Event Processors.
Which type of rule should the analyst create?

  • A. Global Rule
  • B. Persistent Rule
  • C. Local Rule
  • D. Offense Rule

Answer: A

Explanation:
Explanation
Global rules These rules use the Any domain modifier and run across all tenants.

 

NEW QUESTION 53
From which tab in QRadar SIEM can an analyst search vulnerability data and remediate vulnerabilities?

  • A. Admin
  • B. Assets
  • C. Log Activity
  • D. Dashboard

Answer: C

 

NEW QUESTION 54
An analyst noticed that from a particular subnet (203.0.113.0/24), all IP addresses are simultaneously trying to reach out to the company's publicly hosted FTP server.
The analyst also noticed that this activity has resulted in a Type B Superflow on the Network Activity tab-Under which category, should the analyst report this issue to the security administrator?

  • A. Syn Flood
  • B. Network Scan
  • C. DDoS
  • D. Port Scan

Answer: C

 

NEW QUESTION 55
......


IBM C1000-018 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Discuss the content of an event or flow, including the normalized fields
  • Report any abnormal security access trends and events to security admins
Topic 2
  • Report any agents or log sources that are not reporting to QRadar on a regular basis
  • Identify and escalate issues with regards to QRadar health and functionality
Topic 3
  • Review outputs in all available QRadar Tabs
  • Illustrate the impact of QRadar property indexes
Topic 4
  • Perform initial investigation of alerts and offenses created by QRadar
  • Demonstrate how to export Flow/Event data for external analysis
Topic 5
  • Review security risks and network vulnerabilities detected by QRadar
  • Report rule usage and offenses generated by those rules
Topic 6
  • Explain Offense details on offense details view, why/how it was created
  • Distinguish when an event has coalesced information in it
Topic 7
  • Review the vulnerabilities and threat assessment of the hosts that are involved in the offense
  • Navigate to, from and within an offense
Topic 8
  • Break down triggered rules to identify the reason of the offense
  • Distinguish potential threats from probable false positives
Topic 9
  • Extract information for regular or adhoc distribution to consumer of outputs
  • Interpret rules that test for regular expressions
Topic 10
  • Illustrate the difference between rule responses and rule actions
  • Describe the use of the magnitude of an offense
Topic 11
  • Explain the different uses for each search type (ie., filtered, Quick and Advanced)
  • Distinguish offenses from triggered rules
Topic 12
  • Share findings about offenses by distributing offense detail via email
  • Identify and escalate undesirable rule behavior to administrator
Topic 13
  • Review security access trends and anomalies
  • Identify contributing event and or flow information for an offence

 

C1000-018 Exam Questions Get Updated [2021] with Correct Answers: https://www.dumpstorrent.com/C1000-018-exam-dumps-torrent.html