Latest D-PST-DY-23 Actual Free Exam Updated 75 Questions
Online Questions - Valid Practice D-PST-DY-23 Exam Dumps Test Questions
The Dell PowerStore Deploy 2023 Certification Exam is intended for professionals who have experience in deploying and managing storage systems in a variety of environments, including on-premises and cloud-based environments. D-PST-DY-23 exam is ideal for IT professionals who are responsible for deploying and managing Dell PowerStore systems, including system administrators, storage administrators, and architects.
NEW QUESTION # 37
Which of me following is true statement?
- A. PowerStore 500 is NEBS-compliant
- B. PowerStore 500 is not NEBS-compliant
- C. End-to-end NVMe-oF is supported with TCP only
- D. End-to-end NVMe-oF is supported with FC only
Answer: A
NEW QUESTION # 38
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
Explanation:
NEW QUESTION # 39
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
1 - add NVMe over TCP Sofware Adapter
2 - Add Host
3 - Add Controller
4 - Add NVMe volume
NEW QUESTION # 40
Which two pieces of information are required to create a new remote system connection? (Choose two.)
- A. Remote domain name
- B. Network Latency
- C. IP address of local system
- D. IP address of remote system
- E. Remote PowerStore name
Answer: D,E
NEW QUESTION # 41
What is the maximum number of supported replication and snapshot rules in a protection policy?
- A. Four snapshot rules and four replication rules
- B. Four snapshot rules and one replication rule
- C. One snapshot rule and four replication rules
- D. One snapshot rule and one replication rule
Answer: B
Explanation:
https://www.dell.com/support/manuals/en-ca/powerstore-5000/pwrstr-protect-data/protection-policies?guid=guid-c8ba3ba4-6374-4285-9727-900343f64ee2&lang=en-us#:~:text=A%20protection%20policy%20can%20include,on%20the%20rules%20in%20them.
NEW QUESTION # 42
What is the default exposed LUN0 used for?
- A. Internal migration reserve LUN
- B. NVMe Discovery Controller
- C. Storage Array Controller Device
- D. vVol protocol endpoint
Answer: C
Explanation:
LUN 0 and the Storage Array Controller Device (SACD)
In PowerStore, LUN 0 has a specific and important function: it's used for the Storage Array Controller Device (SACD).
SACD: The SACD is a virtual device that provides access to the PowerStore appliance's internal management and control functions. It's essential for tasks like:
Monitoring the health and status of the array
Managing and configuring storage resources
Troubleshooting issues
LUN 0 as the Access Point: LUN 0 serves as the access point to the SACD. It allows authorized users and management tools to communicate with the SACD and perform necessary management operations.
Why other options are incorrect:
B . vVol protocol endpoint: PowerStore uses LUNs 254 and 255 for the vVol (vSphere Virtual Volumes) protocol endpoint.
C . Internal migration reserve LUN: PowerStore doesn't use a specific LUN for internal migration reserves. Migration operations utilize the cluster network and available storage resources dynamically.
D . NVMe Discovery Controller: NVMe discovery in PowerStore doesn't rely on a dedicated LUN. It uses standard NVMe-oF discovery mechanisms over the network.
Important Notes
Not a Typical LUN: LUN 0 is not a standard LUN that can be used for storing data. It's a specialized LUN dedicated to the SACD.
Automatic Exposure: PowerStore exposes LUN 0 by default. You don't need to manually create or configure it.
Dell PowerStore Reference
PowerStore: Host Configuration Guide: This guide provides information about connecting hosts to PowerStore, including details about specialized LUNs like the SACD.
You can find the latest version of this guide on the Dell Support site.
NEW QUESTION # 43
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?
- A. TCP port 8443 and UDP port 5353
- B. TCP and UDP ports 443 and 80
- C. TCP port 80 and UDP port 80
- D. TCP port 5353 and UDP port 5353
Answer: D
Explanation:
To properly discover a Dell PowerStore appliance using the Discovery Utility, you need to ensure that the following ports are open: TCP/UDP 5353: This port is used for mDNS (Multicast DNS) which is the protocol used by the PowerStore Discovery Utility to locate unconfigured PowerStore appliances. mDNS is essential for the appliance discovery process. (Grok 2)
* mDNS (Multicast DNS): PowerStore uses mDNS for discovery, especially when the array is unconfigured. mDNS allows devices to discover each other on a local network without needing a pre-configured DNS server. This is essential for the initial setup and discovery of a new PowerStore system.
* Port 5353: This is the standard port used for mDNS communication. Both TCP and UDP port 5353 need to be open for mDNS to function correctly.
NEW QUESTION # 44
SIMULATION
Use the simulator to assign a protection policy to the virtual machine "VM1". Use the following settings:
Snapshots on Monday through Friday at 10:00 PM Eastern Time
Retention of 10 days
When you have finished, continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution
Explanation:
Navigate to the virtual machine management section where VMs are listed, usually under the "Compute" or "VM" section.
Locate "VM1" from the list of virtual machines.
Access the settings or properties of "VM1".
Look for the "Protection" or "Protection Policies" section within the VM settings.
Select the option to create a new policy or assign an existing one.
In the policy settings, configure the snapshot schedule:
Set the frequency to weekly on Monday, Tuesday, Wednesday, Thursday, and Friday.
Set the time to 10:00 PM Eastern Time.
Configure the retention period for the snapshots to be 10 days.
Save the policy and ensure it is correctly associated with "VM1".
NEW QUESTION # 45
Which configuration item is optional during the PowerStore ICW?
- A. Management Network
- B. Fault Tolerance
- C. Default Users
- D. Support and CloudlQ
Answer: D
NEW QUESTION # 46
What are two minimum requirements for using VMware Site Recovery Manager (SRM) with PowerStore?
(Choose two.)
- A. VMware vCenter Server and ESXi hosts version 6.5 and newer
- B. VMware SRM version 8.3 and newer
- C. VMware SRM version 8.0 and newer
- D. VMware vCenter Server and ESXi hosts version 6.7 and newer
Answer: B,D
NEW QUESTION # 47 
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
Answer:
Explanation:
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
NEW QUESTION # 48
Which two components of Port Group Policy, indicates that the initiator and target connectivity is set while provisioning a volume to an ESXi host using iSCSI connectivity? (Choose two.)
- A. MPIO
- B. Active
- C. ICompliant
- D. 1QN
Answer: B,D
NEW QUESTION # 49
An administrator is connecting a Linux host to a PowerStore appliance and must know which storage network interface to use.
Which nvme subcommand should be used?
- A. attach-ns
- B. connect
- C. id-ccrl
- D. discover
Answer: D
NEW QUESTION # 50
SIMULATION
You're absolutely right! I apologize for my previous response. I can definitely try to extract the text from the image.
Here's the "Task" as written in the image:
A storage administrator must provision local storage resources for his database as per the below requirements:
Create a new "Database" storage resource as a capacity of 5TB
PowerStore under load must prioritize this workload
ESXi host called "ESXi3" is using iSCSI connectivity
The ESXi host must use the LUN number of 101
Use the simulator to make this configuration change.
Answer:
Explanation:
See explanation below
Explanation:
1. Create the Host
Navigate to Compute > Hosts.
Click Add Host.
Enter the host name: ESXi3
Select iSCSI as the protocol.
Click Next.
Select the appropriate Network and Port Group for iSCSI connectivity.
Click Add.
2. Create the Volume
Navigate to Storage > Volumes.
Click Add Volume.
Enter the volume name: SQL_Datastore
Set the volume size to 5 TB.
Important: Under "Advanced Settings," locate the "Performance" section and set the Workload Type to Database. This will prioritize the volume's performance for database operations.
Click Add.
3. Map the Volume to the Host
On the Volumes page, locate the newly created SQL_Datastore volume.
Click the More Actions button (three vertical dots) and select Map to Host.
Choose the ESXi3 host.
Important: In the "LUN ID" field, enter 101 to assign the desired LUN number.
Click Map.
Verification
After completing these steps, go back to the Hosts page and select ESXi3.
Click the Volumes tab to confirm that the SQL_Datastore volume is mapped to the host with the correct LUN ID (101).
Key Considerations
iSCSI Network Configuration: Ensure that your iSCSI network is properly configured with the necessary VLANs and IP addresses.
Host Connectivity: Make sure that the ESXi3 host has the correct iSCSI initiator configuration to connect to the PowerStore appliance.
By following these steps, you'll successfully provision the local storage resources for the database on your new ESXi host, meeting all the specified requirements.
NEW QUESTION # 51
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
NEW QUESTION # 52
Which two NAS servers must be configured with DNS support? (Choose two.)
- A. Servers that are used for Multiprotocol access.
- B. Servers that are accessed through S3 protocol.
- C. Servers that are configured as Standalone.
- D. Servers that are joined to Active Directory.
- E. Servers that are used as FTP servers.
Answer: A,D
Explanation:
B . Servers that are joined to Active Directory:
DNS is required for resolving domain controllers' names when NAS servers are joined to an Active Directory domain. Proper DNS support ensures seamless integration and authentication within the domain.
D . Servers that are used for Multiprotocol access:
Multiprotocol access allows both SMB (CIFS) and NFS clients to access the same NAS server. DNS is essential for name resolution, especially in environments where SMB relies on domain-based configurations.
NEW QUESTION # 53
SIMULATION
In a PowerStore T source cluster create a 100GB volume with name "Prod_vol" with a category of "Other". Set its protection policy to replicate the volume with an RPO of 30 minutes to Cluster1. The destination cluster is already configured.
When you have finished, continue to the next question.
Answer:
Explanation:
see the steps in explanation below
Explanation:
1. Log in to the PowerStore Manager of the source cluster.
2. From the top menu, click Storage and select Volumes from the drop-down list
3. Click Create and enter the following information:
4. Name: Prod vol
5. Description: (optional)
6. Quantity: 1
7. Size: 100 GB
8. Application Tag: Other
9. Click Next and select the protection policy that has a replication rule to Cluster1 with an RPO of 30 minutes. If there is no such policy, click Create and follow the steps to create a new protection policy with a replication rule
10. Click Next and review the summary of the volume creation.
11. Click Create to create the volume and start the replication session to Cluster1.
NEW QUESTION # 54
Which two pieces of information are required to create a new remote system connection? (Choose two.)
- A. Remote domain name
- B. Remote PowerStore name
- C. IP address of local system
- D. IP address of remote system
- E. Network Latency
Answer: D,E
Explanation:
In the Add Remote System slide-out panel, configure the following fields:
- Remote system type - Select PowerStore.
- Management IP address
- Description (optional)
- Network latency
https://www.dell.com/support/manuals/en-us/powerstore-7000/pwrstr-protect-data/add-a-remote-system-connection-for-replication-and-metro?guid=guid-937b06e1-2a74-40e1-a8b6-9aae6f72e27d&lang=en-us
NEW QUESTION # 55
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?
- A. TCP port 8443 and UDP port 5353
- B. TCP port 5353 and UDP port 5353
- C. TCP and UDP ports 443 and 80
- D. TCP port 80 and UDP port 80
Answer: A
NEW QUESTION # 56
An administrator removes a volume from an existing volume group which is part of replication. The system generates an error stating that it cannot create a replication session for the volume.
Why does removing the volume generate an error message?
- A. The volume is not mapped to the volume group host
- B. The volume group configuration must be synchronized
- C. The volume group alerts must be acknowledged
- D. The volume already has a protection policy
Answer: D
NEW QUESTION # 57
......
D-PST-DY-23 Exam PDF [2025] Tests Free Updated Today with Correct 75 Questions: https://www.dumpstorrent.com/D-PST-DY-23-exam-dumps-torrent.html
100% Real D-PST-DY-23 dumps - Brilliant D-PST-DY-23 Exam Questions PDF: https://drive.google.com/open?id=1Ol5edfDepOk16ZB71eB40xO6YTXtrCyO