Latest CTS Actual Free Exam Updated 114 Questions
Online Questions - Valid Practice CTS Exam Dumps Test Questions
Axis Communications CTS Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
AVIXA CTS Exam Certification Details:
| Sample Questions | AVIXA CTS Sample Questions |
| Exam Code | CTS |
| Books / Training | Candidate Handbook |
| Passing Score | 350 / 500 |
| Duration | 150 mins |
| Exam Name | AVIXA Certified Technology Specialist (CTS) |
| MemberExam Price | $375(USD) |
| Number of Questions | 110 |
| Non-Member Exam Price | $475(USD) |
NEW QUESTION # 67
According to AVIXA Standards, what is the MINIMUM load rating for truss that will hold a 5000 lbs (2268 kg) LED wall?
- A. 50000 lbs (22678 kg)
- B. 15000 lbs (6804 kg)
- C. 25000 lbs (11340 kg)
- D. 30000 lbs (13608 kg)
Answer: C
Explanation:
According to AVIXA standards, the minimum load rating for a truss that will hold a 5000 lbs (2268 kg) LED wall is typically calculated with a safety factor to ensure stability and safety. Thesafety factor generally used in rigging and truss systems is 5:1. This means the truss should be rated to hold five times the weight of the load it needs to support.
Given this safety factor:
5000 lbs×5=25000 lbs5000 \text{ lbs} \times 5 = 25000 \text{ lbs}5000 lbs×5=25000 lbs Therefore, the minimum load rating required for the truss to safely support a 5000 lbs (2268 kg) LED wall is
25000 lbs (11340 kg).
References:
* AVIXA Rigging Guidelines
* Understanding Load Ratings and Safety Factors
* Rigging and Load Calculations in AV Installations
NEW QUESTION # 68
Which section of a program report describes the probable costs of an AV project?
- A. needs analysis
- B. budget
- C. systems descriptions
- D. infrastructure requirements
Answer: B
Explanation:
The budget section of a program report describes the probable costs of an AV project. This section outlines the estimated expenses for equipment, labor, installation, and other associated costs, providing the client with a financial overview of the project. Axis Technology Specialist documentation specifies that a detailed budget is essential for planning and managing project finances effectively.
NEW QUESTION # 69
What is the document that shows project tasks, indicating their allocated time, dependencies, and relationships between activities?
- A. needs analysis
- B. Venn diagram
- C. Gantt chart
- D. flow chart
Answer: C
Explanation:
A Gantt chart is a project management tool that visually represents project tasks along a timeline. It shows the start and end dates of tasks, their duration, dependencies between tasks, and the relationships between activities. Gantt charts are widely used to plan, schedule, and monitor project progress, providing a clear overview of the project timeline and helping ensure that tasks are completed on schedule.
Top of Form
Bottom of Form
NEW QUESTION # 70
The color of a light wave is determined by the
- A. polarization.
- B. amplitude.
- C. ambient temperature.
- D. frequency.
Answer: D
Explanation:
The color of a light wave is determined by its frequency. Different frequencies of light waves correspond to different colors in the visible spectrum. For instance, higher frequencies correspond to blue/violet light, while lower frequencies correspond to red light. Axis Technology Specialist documentation includes explanations of light properties, emphasizing the relationship between frequency and color to ensure proper selection and use of lighting in AV installations.
Top of Form
Bottom of Form
NEW QUESTION # 71
Reverberant sound reaches the listener's ears
- A. synchronized with
D at the same level as the direct sound. - B. after
- C. before
Answer: B
Explanation:
Reverberant sound reaches the listener's ears after the direct sound. This occurs because reverberant sound is reflected off various surfaces within a space, such as walls, ceilings, and floors, before arriving at the listener.
The time delay between the arrival of the direct sound and the reverberant sound contributes to the sense of space and ambience in an environment.
NEW QUESTION # 72
When calibrating a loudspeaker system, which weight setting on the SPi. meter is used for its mdus>on of low frequency sound levels in the measurement?
- A. Weighted
- B. Weighted
- C. Weighted
- D. Weighted
Answer: C
Explanation:
When calibrating a loudspeaker system, the C-weighted setting on an SPL (Sound Pressure Level) meter is typically used because it provides a relatively flat frequency response, including low-frequency sound levels.
This makes it more suitable for accurately measuring the overall sound pressure level, especially in environments where low-frequency performance is critical, such as in audio and home theater systems. The C-weighted setting captures the full range of audible frequencies, ensuring a comprehensive and precise calibration.
Top of Form
Bottom of Form
NEW QUESTION # 73
What section of the color chart is used to calibrate brightness? Select the answer by clicking on the appropriate area of the chart
Answer:
Explanation:
Explanation:
The section with the grayscale bars (bottom row, from white to black)
Brightness calibration is typically done using the grayscale section of a color chart. The grayscale bars provide a range of luminance levels from white to black, allowing the calibration process to adjust the display so that each shade is distinct and accurately represented. Proper calibration ensures that the display shows details in both bright and dark areas of the image, achieving the correct overall brightness.
NEW QUESTION # 74
When planning to use audio equipment on a converged enterprise network, it may be desirable to separate broadcast domains in order to
- A. avoid delaying time sensitive AV traffic on the network.
- B. comply with local electrical and telecommunication regulations.
- C. avoid crosstalk between multi track channel packets.
- D. avoid audio feedback between devices.
Answer: A
Explanation:
When using audio equipment on a converged enterprise network, separating broadcast domains is essential to avoid delaying time-sensitive AV traffic. AV traffic, such as audio and video streams, requires low latency and minimal jitter to maintain quality. By segregating these streams from other types of network traffic, such as data and general communications, network performance can be optimized, ensuring that AV services operate smoothly without interruption.
References:
* Axis Communications - Network Design and AV Integration
* IT and Network Management Best Practices
NEW QUESTION # 75
What is the standard impedance of a DMX cable?
- A. 110 Q
- B. 150 Q
- C. 55 Q
- D. 75 Q
Answer: A
Explanation:
The standard impedance for a DMX (Digital Multiplex) cable is 110 ohms (). DMX is a standard for digital communication networks commonly used to control stage lighting and effects. The 110-ohm impedance is crucial for ensuring the integrity and reliability of the digital signal over long distances. Using cables with the correct impedance prevents signal reflections and ensures proper transmission of the DMX data without errors, maintaining the synchronization and performance of lighting systems.
NEW QUESTION # 76
Upon completion of hardware installation and configuration for a new deployment, the NEXT thing the AV Project Manager should have scheduled is
- A. training the client.
- B. invoicing and project close out.
- C. preventative maintenance schedule.
- D. testing and verification.
Answer: D
Explanation:
Upon completion of hardware installation and configuration for a new deployment, the next thing the AV Project Manager should have scheduled is testing and verification. This step ensures that all installed equipment functions correctly and meets the project specifications. It involves checking system performance, resolving any issues, and confirming that the setup works as intended. Axis Technology Specialist documentation underscores the critical role of thorough testing and verification in delivering a successful AV project.
Top of Form
Bottom of Form
NEW QUESTION # 77
Which of the following protocol allows sources and displays to communicate in order to ensure the display is sent the correct signal?
- A. DVB
- B. EDID
- C. ATSC
- D. HDCP
Answer: B
NEW QUESTION # 78
In an audiovisual system where a touch panel is to be connected to the control system via the LAN, the designer may choose to use a
- A. shared IP address.
- B. host IP address.
- C. static IP address.
- D. MAC address.
Answer: C
NEW QUESTION # 79
What is the MAIN benefit of carrying out regular software updates provided by the device manufacturer?
- A. providing a higher data throughput
- B. providing a better understanding of the system
- C. enhancing the data security of the system
- D. increasing the bandwidth
Answer: C
NEW QUESTION # 80
Which of the following is the BEST service when new firmware is available for installed equipment across a fleet of conference rooms?
- A. updating them all at once
- B. keeping current version
- C. replacing the equipment
- D. a ringed update approach
Answer: D
Explanation:
The ringed update approach is the best service when new firmware is available for installed equipment across a fleet of conference rooms. This approach involves updating the firmware in phases or "rings," starting with a small group of devices to ensure that the update is stable and does not introduce new issues. Once the initial ring is confirmed to be successful, the update is gradually rolled out to additional groups, reducing the risk of widespread problems. This method allows for controlled testing and monitoring, ensuring that any issues can be addressed before the update is applied to all devices.
Top of Form
Bottom of Form
NEW QUESTION # 81
The contrast control sets the
- A. range for the difference between white and black.
- B. range for the hue of the image.
- C. color temperature of the image.
- D. white balance of the Image.
Answer: A
Explanation:
The contrast control on a display adjusts the range for the difference between white and black. Increasing the contrast makes the whites brighter and the blacks darker, enhancing the overall clarity and sharpness of the image. Proper contrast settings are vital for ensuring that the image displayed is visually appealing and easy to interpret, especially in varying lighting conditions.
References:
* Axis Communications - Display Settings and Calibration
* AV Technology Standards
NEW QUESTION # 82
In order to mount a projector so that it is horizontally centered with the suspended screen, the technician should look at which drawings in the plans?
- A. elevations
- B. reflected ceiling
- C. sections
- D. detail
Answer: B
Explanation:
To mount a projector so that it is horizontally centered with the suspended screen, the technician should look at the reflected ceiling drawings in the plans. Reflected ceiling plans provide a view from above, showing the layout and alignment of ceiling elements, including projectors, screens, lighting, and other fixtures. This perspective is essential for ensuring that the projector is correctly aligned with the screen. Axis Technology Specialist documentation highlights the use of reflected ceiling plans for precise alignment of AV equipment.
NEW QUESTION # 83
After installation, the system does not pass audio. Based on the information in the drawing, what is the MOST LIKELY cause?
- A. cable lengths
- B. system needs a DSP
- C. speaker requires a 70 V transformer
- D. phantom power is required
Answer: D
Explanation:
The microphone in the setup may require phantom power to operate. Phantom power is a DC voltage (usually
48V) supplied through the microphone cable to power condenser microphones. Without phantom power, a condenser microphone will not function, resulting in no audio being passed through the system. Since the drawing shows a microphone connected to a digital audio transmitter, it's likely a condenser microphone, and if it isn't receiving phantom power, this would be the most probable cause of the system not passing audio.
NEW QUESTION # 84
Which one of these features has to be disabled for a network switch in a Dante network?
- A. QoS (Quality of Service)
- B. IGMP (Internet Group Management Protocol)
- C. PoE (Power over Ethernet)
- D. EEE (Energy Efficient Ethernet)
Answer: D
Explanation:
Energy Efficient Ethernet (EEE) must be disabled in a Dante network. EEE can cause latency and jitter issues which are detrimental to audio streams. Dante is designed for low-latency, high-reliability audio networking, and EEE's power-saving mechanisms, which involve putting links to sleep, can interfere with the consistent data transmission required by Dante networks. Disabling EEE ensures stable and uninterrupted network performance for audio applications.
NEW QUESTION # 85
When an audio device can no longer accurately reproduce the audio signal, It is called
- A. feedback.
- B. distortion.
- C. saturation.
- D. dithering.
Answer: B
Explanation:
Distortion occurs when an audio device can no longer accurately reproduce the input audio signal. This happens when the signal exceeds the device's capacity to process it linearly, resulting in a corrupted output that differs from the original signal. Distortion can be caused by overloading the device's input or output stages, improper gain settings, or defects in the audio components. It degrades the quality of the audio signal and can manifest as unwanted noise or alterations in the sound.
NEW QUESTION # 86
When connecting a condenser microphone, what MUST be included in die system design for it to operate?
- A. power source
- B. stand
- C. transmitter
- D. mixer
Answer: A
Explanation:
A condenser microphone requires a power source to operate because it uses an electrostatic principle to convert sound into an electrical signal. This power is typically provided by phantom power supplied by a mixer or an audio interface. Without this power source, the condenser microphone will not function. It is crucial to include a power source in the system design to ensure the microphone operates correctly.
References:
* Axis Communications - Audio Equipment Integration
* Audio Engineering Society (AES) Standards
NEW QUESTION # 87
The best practice for tagging AV equipment for inventory management is to
- A. use a unique identifier for each item.
- B. include the value of each item on the tag.
- C. label all Items of the same model with a common identifier.
- D. only tag Items over $99.00 in value.
Answer: A
Explanation:
The best practice for tagging AV equipment for inventory management is to use a unique identifier for each item. This ensures that each piece of equipment can be tracked individually, reducing the risk of loss or confusion. Unique identifiers can include barcodes or RFID tags, which facilitate accurate and efficient tracking of inventory. Axis Technology Specialist documentation stresses the importance of unique identifiers in maintaining precise records and managing assets effectively.
NEW QUESTION # 88
After there is an approved labor change to a project, what should the project manager do NEXT?
- A. update the schedule
- B. inform the purchasing department
- C. order the equipment
- D. issue an invoice for the change
Answer: A
Explanation:
Once a labor change is approved, the next step for the project manager is to update the project schedule.
Changes in labor can affect the timeline of the project, and updating the schedule ensures that all stakeholders are aware of the new timelines and can adjust their plans accordingly. This step is critical for maintaining project organization and ensuring that the project stays on track despite the changes.
NEW QUESTION # 89
......
CTS Exam PDF [2024] Tests Free Updated Today with Correct 114 Questions: https://www.dumpstorrent.com/CTS-exam-dumps-torrent.html
100% Real CTS dumps - Brilliant CTS Exam Questions PDF: https://drive.google.com/open?id=1SCBuYSCN77X1fEX3uTqdCO8MX9vTqnJy