Free OMS-435 Sample Questions and 100% Cover Real Exam Questions (Updated 85 Questions)
Download Real Salesforce OMS-435 Exam Dumps Test Engine Exam Questions
NEW QUESTION # 10
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 12.99,13.99
- B. 13.99
- C. 12.99
- D. Null
Answer: B
NEW QUESTION # 11
Refer to the exhibit.
The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
A)
B)
C)
- A. Option A
- B. Option B
- C. Option C
Answer: C
NEW QUESTION # 12
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in a Community?
- A. Configure the Component Visibility in the Custom Component
- B. Set the Deployment property in Card Configuration to "Community"
- C. Set the Target property in Publish Options to "CommunityPage"
- D. Add the FlexCard's API name to the FlexCard Player component
Answer: C
NEW QUESTION # 13
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set values element.
- B. The LWC PubSub Message flag in the Set Values action of the parent has not been set.
- C. The flag passDataJSON in the parent OmniScript in not configured correctly.
- D. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
Answer: B
NEW QUESTION # 14
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?
- A. Set element to require if true
- B. Show element if true
- C. Set element to optional if false
- D. Disable read only if true
Answer: B
NEW QUESTION # 15
When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:
Which two errors could cause this behavior?
Choose 2 answers
Choose 2 answers
- A. In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.
- B. The Id Field for Actions in the FlexCard is blank.
- C. There is no active version of the Data Raptor Extract.
- D. There is no active version of the OmniScript
Answer: A,B
NEW QUESTION # 16
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?
- A. Add a navigation Action inside each step and set the Component name to ''Cancel'',
- B. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
- C. Add a navigation Action inside each step and set the Element Name to ''Cancel'',
- D. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
Answer: D
NEW QUESTION # 17
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. The Typeghead ley is not in the correct format
- B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- C. Use Data JSON is not selected in the properties of the Type Ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: B
NEW QUESTION # 18
A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?
- A. %SetValues Date
- B. {(SetValues. Date)}
- C. (' Setvalues'] [ 'Date']
- D. x%SetValues.Date%
Answer: A
NEW QUESTION # 19
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?
- A. Check is Lookup property when mapping the fields.
- B. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.
- C. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
- D. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.
Answer: A,D
NEW QUESTION # 20
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
A)
B)
C)
D)
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
NEW QUESTION # 21
A developer needs to limit the of a DataRaptor Extract to a maximum of one result.
How should the developer configure this?
- A. Set the Limit Property on the Action that calls the DataRaptor Extract.
- B. Use a Custom Output Type when creating the DataRaptor
- C. Define a formula with the Filter function
- D. Use the LIMIT filter on the Extract definition
Answer: D
NEW QUESTION # 22
What OmniStudio tool pre-populates the data m a PDF used by an OmniScript?
- A. A DataRaptor Transform
- B. A DataRaptor Extract
- C. A DataRaptor Load
- D. A SOQL Query
Answer: A
NEW QUESTION # 23
A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.
The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.
While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set values element.
- B. The LWC PubSub Message flag in the Set Values action of the parent has not been set.
- C. The flag passDataJSON in the parent OmniScript in not configured correctly.
- D. A developer failed to include a Navigation Element to pass data from the parent OmniScript.
Answer: B
NEW QUESTION # 24
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Params.postalcode}
- B. {Postalcode}
- C. {Records.postalcode}
- D. {Parent.postalcode}
Answer: D
NEW QUESTION # 25
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. The fields have exceeded the maximum number allowed on the card.
- B. {recordld} us misspelled in the Data Source Input Map.
- C. The field is null 0 the Salesforce record.
- D. There are no test parameters configured.
Answer: C
NEW QUESTION # 26
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
- A. To $Details:Customer|0:ID$
- B. To %%Details:Customer|1:ID%
- C. To %%Details:Customer|n:ID%
- D. To %%Details:Customer|0:ID%%
Answer: B
NEW QUESTION # 27
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?
- A. BlockX:BlockY:ActionAZ
- B. ActionZ:BlockY:BlockX
- C. BlockX.BlockYActionZ
- D. ActionZ:BlockY:BlockX
Answer: A
NEW QUESTION # 28
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Set the collapsible property on the block element
- B. Set the class'' collapsible'' on the block element
- C. Use a Datatable element
- D. Use a conditional FlexCard State
Answer: A
NEW QUESTION # 29
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
- B. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- C. The state sequenced first in the FlexCard canvas will display.
- D. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
Answer: B
NEW QUESTION # 30
......
Earning the Salesforce OMS-435 certification can open up new career opportunities for professionals in the Salesforce ecosystem. Build Guided Experiences with OmniStudio certification demonstrates to potential employers that you have the skills and expertise to design and build custom guided experiences using the Salesforce Platform. With this certification, professionals can advance their careers and become trusted advisors to their clients and organizations.
Salesforce OMS-435 exam is ideal for professionals who have experience in working with Salesforce technology and want to specialize in building guided experiences using the OmniStudio platform. OMS-435 exam is designed to test your knowledge and skills in various areas, such as creating custom components, using the Flow Builder, building guided experiences, and more. Build Guided Experiences with OmniStudio certification you receive after passing OMS-435 exam will demonstrate your expertise in the Salesforce ecosystem and increase your chances of advancing your career.
New OMS-435 exam dumps Use Updated Salesforce Exam: https://www.dumpstorrent.com/OMS-435-exam-dumps-torrent.html
Verified OMS-435 Dumps Q&As - OMS-435 Test Engine with Correct Answers: https://drive.google.com/open?id=1k5ZPBUn7gXp1Pwuc4vg9VuIP8Q_H3alS