[Dec-2021] Juniper JN0-635 Exam Practice Test Questions - DumpsTorrent
Updated Certification Exam JN0-635 Dumps - Practice Test Questions
NEW QUESTION 44
You have designed the firewall filter shown in the exhibit to limit SSH control traffic to yours SRX Series device without affecting other traffic.
Which two statement are true in this scenario? (Choose two.)
- A. The filter should be applied as an input filter on the loopback interface.
- B. Applying the filter will not achieve the desired result.
- C. Applying the filter will achieve the desired result.
- D. The filter should be applied as an output filter on the loopback interface.
Answer: A,B
Explanation:
Reference:
https://www.juniper.net/documentation//en_US/junos/topics/concept/firewall-filter-ex-series-evaluation-understanding.html
NEW QUESTION 45
Click the Exhibit button.
Given the command output shown in the exhibit, which two statements are true? (Choose two.)
- A. The host 172.31.15.1 is directly connected to interface ge-0/0/3.0
- B. The host 10.10.101.10 is directly connected to interface ge-0/0/4.0
- C. Network Address Translation is applied to this session
- D. Traffic matching this session has been received since the session was established
Answer: B,D
NEW QUESTION 46
You are not able to activate the SSH honeypot on the all-in-one Juniper ATP appliance.
What would be a cause of this problem?
- A. The collector must have a minimum of four interfaces.
- B. The collector must have a minimum of two interfaces.
- C. The collector must have a minimum of three interfaces.
- D. The collector must have a minimum of five interfaces.
Answer: A
NEW QUESTION 47
You configured a security policy permitting traffic from the trust zone to the DMZ zone, inserted the new policy at the top of the list, and successfully committed it to the SRX Series device. Upon monitoring, you notice that the hit count does not increase on the newly configured policy.
In this scenario, which two commands would help you to identify the problem? (Choose two.)
- A. user@srx> show security zones trust detail
- B. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port 443
- C. user@srx> show security shadow-policies from zone trust to zone DMZ
- D. user@srx> show security match-policies from-zone trust to-zone DMZ source-ip 192.168.10.100/32 destination-ip 10.10.10.80/32 protocol tcp source-port 5806 destination-port
443 result-count 10
Answer: C,D
NEW QUESTION 48
You must troubleshoot ongoing problems with IPsec tunnels and security policy processing. Your network consists of SRX340s and SRX5600s.
In this scenario, which two statements are true? (Choose two.)
- A. You must enable data plane logging on the SRX5600 devices to generate security policy logs
- B. IPsec logs are written to the kmd log file by default
- C. IKE logs are written to the messages log file by default
- D. You must enable data plane logging on the SRX340 devices to generate security policy logs
Answer: A,B
NEW QUESTION 49
In a Juniper ATP Appliance, what would be a reason for the mitigation rule to be in the failed-remove state?
- A. The Juniper ATP Appliance received an unknown error message from the SRX Series device
- B. The Juniper ATP Appliance was not able to communicate with the SRX Series device
- C. The Juniper ATP Appliance received a commit error message from the SRX Series device
- D. The Juniper ATP Appliance was not able to obtain the config lock
Answer: D
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Events based on this third-party feed will not affect a host's threat score
- B. SRX Series devices will not block traffic based on this third-party feed
- C. Events based on this third-party feed will affect a host's threat score
- D. SRX Series devices will block traffic based on this third-party feed
Answer: A,D
NEW QUESTION 51
Click the Exhibit button.
Referring to the exhibit, which statement is true?
- A. ARP security is securing data across the control interface
- B. MACsec is securing data across the control interface
- C. IPsec is securing data across the control interface
- D. SSH is securing data across the control interface
Answer: B
NEW QUESTION 52
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS has no reservation for the security flow resource.
- B. The c-1 TSYS cannot use any security flow resources.
- C. The c-1 TSYS can use security flow resources up to the system maximum.
- D. The c-1 TSYS has a reservation for the security flow resource.
Answer: A,B
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION 53
What are two important function of the Juniper Networks ATP appliance solution? (Choose two.).
- A. Detection
- B. Statistics
- C. Analysis
- D. Filtration
Answer: A,C
Explanation:
Reference:
https://www.juniper.net/us/en/products-services/security/advanced-threat-prevention/
NEW QUESTION 54
Click the Exhibit button.
Referring to the exhibit, which three types of traffic would be examined by the IPS policy between Switch-1 and Switch-2? (Choose three.)
- A. TCP
- B. ARP
- C. ICMP
- D. LLDP
- E. UDP
Answer: A,C,E
NEW QUESTION 55
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The device can pass Layer 2 and Layer 3 traffic at the same time
- B. You can secure inter-VLAN traffic with a security policy on this device
- C. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- D. You can secure intra-VLAN traffic with a security policy on this device
Answer: C,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ethernet-port-switching- modes.html
NEW QUESTION 56
You are asked to configure a new SRX Series CPE device at a remote office. The device must participate in forwarding MPLS and IPsec traffic.
Which two statements are true regarding this implementation? (Choose two.)
- A. Host inbound traffic must not be processed by the flow module
- B. The SRX Series device can process both MPLS and IPsec with default traffic handling
- C. Host inbound traffic must be processed by the flow module
- D. A firewall filter must be configured to enable packet mode forwarding
Answer: A,D
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-packet-based- forwarding.html
NEW QUESTION 57
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an output filter on interface xe-0/1/0.0
- B. Apply the filter as an input filter on interface xe-0/2/1.0
- C. Create a routing instance named default
- D. Apply the filter as an input filter on interface xe-0/0/1.0
Answer: D
NEW QUESTION 58
Click the Exhibit button.
You have recently committed the IPS policy shown in the exhibit. When evaluating the expected behavior, you notice that you have a session that matches all the rules in your IPS policy.
In this scenario, which action would be taken?
- A. drop packet
- B. no-action
- C. ignore-connection
- D. close-client-and-server
Answer: B
NEW QUESTION 59
Click the Exhibit button.
Referring to the exhibit, which IPS deployment mode is running on the SRX5800 device?
- A. monitor mode
- B. in-line tap mode
- C. integrated mode
- D. sniffer mode
Answer: C
NEW QUESTION 60
You have configured three logical tunnel interfaces in a tenant system on an SRX1500 device. When committing the configuration, the commit fails.
In this scenario, what would cause this problem?
- A. The SRX1500 device requires a tunnel PIC to allow for logical tunnel interfaces
- B. There is no VPLS switch on the tenant system containing a peer It-0/0/0 interface
- C. There is no GRE tunnel between the tenant system and master system allowing SSH traffic
- D. The SRX1500 device does not support more than two logical interfaces per tenant system
Answer: B
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/logical-systems- overview.html
NEW QUESTION 61
Click the Exhibit button.
You have configured an ADVPN that is operational. However, OSPF will not establish correctly across the ADVPN tunnels.
Referring to the exhibit, which two commands will solve the problem? (Choose two.)
- A. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 topology advpn - B. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 dynamic-neighbors - C. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 interface-type nbma - D. [edit protocols ospf area 0.0.0.0]
user@srx# set interface st0.0 demand-circuit
Answer: B,D
NEW QUESTION 62
Click the Exhibit button.
You are asked to look at a configuration that is designed to take all traffic with a specific source IP address and forward the traffic to a traffic analysis server for further evaluation. The configuration is not working as intended.
Referring to the exhibit, which change must be made to correct the configuration?
- A. Apply the filter as an output filter on interface xe-0/1/0.0
- B. Apply the filter as an input filter on interface xe-0/2/1.0
- C. Create a routing instance named default
- D. Apply the filter as an input filter on interface xe-0/0/1.0
Answer: D
NEW QUESTION 63
You are asked to secure your network against TOR network traffic.
Which two Juniper products would accomplish this task? (Choose two.)
- A. Contrail Edge
- B. Juniper ATP Appliance
- C. Juniper Sky ATP
- D. Contrail Insights
Answer: B,C
NEW QUESTION 64
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s. After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task?
(Choose two.)
- A. [edit security flow]
user@srx# set load-distribution session-affinity ipsec - B. [edit security flow]
user@srx# set tcp-mss ipsec-vpn mss 65535 - C. [edit security flow]
user@srx# set ipsec-performance-acceleration - D. [edit security flow]
user@srx# set power-mode-ipsec
Answer: A,C
NEW QUESTION 65
Click the Exhibit button.
Which type of NAT is shown in the exhibit?
- A. NAT64
- B. persistent NAT
- C. DS-Lite
- D. NAT46
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 66
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. BGP
- B. IKEv1
- C. shortcut partner
- D. OSPF
- E. shortcut suggester
Answer: C,D,E
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery- vpns.html
NEW QUESTION 67
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. Events based on this third-party feed will not affect a host's threat score
- B. SRX Series devices will not block traffic based on this third-party feed
- C. Events based on this third-party feed will affect a host's threat score
- D. SRX Series devices will block traffic based on this third-party feed
Answer: A,D
NEW QUESTION 68
Click the Exhibit button.
You have configured tenant systems on your SRX Series device.
Referring to the exhibit, which two actions should you take to facilitate inter-TSYS communication? (Choose two.)
- A. Place the logical tunnel interfaces in a virtual router routing instance in the interconnect switch
- B. Connect each TSYS with the interconnect switch by configuring Ethernet VPLS configured logical tunnel interfaces in the interconnect switch
- C. Place the logical tunnel interfaces in a VPLS routing instance in the interconnect switch
- D. Connect each TSYS with the interconnect switch by configuring INET configured logical tunnel interfaces in the interconnect switch
Answer: A,D
NEW QUESTION 69
......
Recertification Details
You can recertify for the JNCIP-SEC through testing by passing the relevant professional-level exam, by nailing the expert-level exam to advance the certification level, or by attending courses by Juniper Networks or any Juniper Networks Authorized Education Partners. If you pass an exam or take a course that is at a higher level than the certification you opt to recertify, you can renew all lower-level designations within that certification track. For example, if you recertify the expert-level JNCIE-SEC certification either through testing or by a course, you would have effectively recertified the lower-level security certificates including the JNCIP-SEC, JNCIS-SEC, and JNCIA-SEC. This recertification is valid for another three years from the time you passed the recertification exam or course. If you fail to recertify by the end of the active period, you will have to re-earn the certification from scratch.
Resources for JN0-635 Exam Preparation
Several resources are recommended by Juniper Networks to pass your professional-level exam. Some of them are:
- Advanced Juniper Security (AJSEC) Course
This is a four-day class that covers Juniper Security (JSEC), next-generation security features, and ATP supporting software. During this training, you will take part in hands-on labs and experience demonstrations to learn advanced Junos OS security features, including configuration & monitoring, advanced logging, reporting, next-generation Layer 2 security, and next-generation advanced anti-malware from Juniper ATP On-Prem and SecIntel. You can register for this course through the official Juniper Networks website. For the hands-on portions, this course uses Juniper Networks SRX Series Services Gateways. The last thing to mention, such a course requires you to have attended the Juniper Security course (JSEC) as a prerequisite.
- Juniper Security (JSEC) Training
This is a five-day introductory course for Juniper Connected Security. Here, you will learn advanced security policies, application-layer security, IPS rules, custom attack objects, Security Director management, SRX chassis clustering configuration, troubleshooting, and other relevant areas. Moreover, hands-on labs and demonstrations are available to help students gain sufficient experience with handling the Junos OS, including configuration and monitoring. You will also learn to monitor basic device operations. All in all, such a course covers 4 Juniper products, namely Security, Junos OS, SRX Series, and vSRX series. At last, you need to have already successfully completed the Introduction to Juniper Security (IJSEC) course, as a prerequisite.
Updated Verified JN0-635 dumps Q&As - Pass Guarantee or Full Refund: https://www.dumpstorrent.com/JN0-635-exam-dumps-torrent.html