Best Fortinet NSE7_OTS-7.2 Exam Practice Material Updated on Mar 22, 2024
New NSE7_OTS-7.2 Actual Exam Dumps, Fortinet Practice Test
Fortinet NSE7_OTS-7.2 Certification Exam is designed to validate the knowledge and skills of security professionals in the field of operational technology (OT). NSE7_OTS-7.2 exam is part of the Fortinet Network Security Expert (NSE) program, which offers a comprehensive range of certifications to demonstrate expertise in Fortinet products and technologies. The NSE7_OTS-7.2 exam focuses on the Fortinet NSE 7 OT Security 7.2 solution, which is designed to provide advanced security for industrial control systems and other operational technology environments.
Fortinet NSE7_OTS-7.2 exam is an essential certification for professionals working in the OT security field. It provides a comprehensive understanding of the latest OT security practices and technologies, and passing NSE7_OTS-7.2 exam will demonstrate to employers that a candidate has the necessary skills and knowledge to secure OT environments effectively.
NEW QUESTION # 18
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- B. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
- C. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- D. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
Answer: D
NEW QUESTION # 19
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- B. PLCs use IEEE802.1Q protocol to communicate each other.
- C. An administrator can create firewall policies in the switch to secure between PLCs.
- D. There is no micro-segmentation in this topology.
Answer: D
NEW QUESTION # 20
An OT supervisor has configured LDAP and FSSO for the authentication. The goal is that all the users be authenticated against passive authentication first and, if passive authentication is not successful, then users should be challenged with active authentication.
What should the OT supervisor do to achieve this on FortiGate?
- A. Under config user settings configure set auth-on-demand implicit.
- B. Configure a firewall policy with LDAP users and place it on the top of list of firewall policies.
- C. Configure a firewall policy with FSSO users and place it on the top of list of firewall policies.
- D. Enable two-factor authentication with FSSO.
Answer: C
Explanation:
Explanation
The OT supervisor should configure a firewall policy with FSSO users and place it on the top of list of firewall policies in order to achieve the goal of authenticating users against passive authentication first and, if passive authentication is not successful, then challenging them with active authentication.
NEW QUESTION # 21
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. End station traffic monitoring
- B. Link traps
- C. MAC notification traps
- D. RADIUS
Answer: D
Explanation:
Explanation
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 22
What can be assigned using network access control policies?
- A. Layer 3 polling intervals
- B. Logical networks
- C. Profiling rules
- D. FortiNAC device polling methods
Answer: B
NEW QUESTION # 23
Which two statements about the Modbus protocol are true? (Choose two.)
- A. Modbus uses UDP frames to transport MBAP and function codes.
- B. You can implement Modbus networking settings on internetworking devices.
- C. Modbus is used to establish communication between intelligent devices.
- D. Most of the PLC brands come with a built-in Modbus module.
Answer: B,D
NEW QUESTION # 24
Which two frameworks are common to secure ICS industrial processes, including SCADA and DCS? (Choose two.)
- A. IEC104
- B. IEC 62443
- C. NIST Cybersecurity
- D. Modbus
Answer: A,B
NEW QUESTION # 25
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. SSL Inspection must be set to deep-inspection to correctly apply application control.
- B. IPS must be enabled to inspect application signatures.
- C. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
- D. The application filter overrides the default action of some IEC 104 signatures.
Answer: D
NEW QUESTION # 26
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of an SNMP temperature control event log.
- B. This is a sample of a PAM event type.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of a FortiAnalyzer system interface event log.
Answer: B
NEW QUESTION # 27
An OT administrator deployed many devices to secure the OT network. However, the SOC team is reporting that there are too many alerts, and that many of the alerts are false positive. The OT administrator would like to find a solution that eliminates repetitive tasks, improves efficiency, saves time, and saves resources.
Which products should the administrator deploy to address these issues and automate most of the manual tasks done by the SOC team?
- A. FortiSandbox and FortiSIEM
- B. A syslog server and FortiSIEM
- C. FortiSIEM and FortiManager
- D. FortiSOAR and FortiSIEM
Answer: D
NEW QUESTION # 28
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. Rogue devices, each time they connect
- B. Rogue devices, only when they connect for the first time
- C. Known trusted devices, each time they change location
- D. All connected devices, each time they connect
Answer: B
NEW QUESTION # 29
Which three common breach points can be found in a typical OT environment? (Choose three.)
- A. Black hat
- B. Hard hat
- C. Global hat
- D. VLAN exploits
- E. RTU exploits
Answer: A,B,E
NEW QUESTION # 30
An OT network architect must deploy a solution to protect fuel pumps in an industrial remote network. All the fuel pumps must be closely monitored from the corporate network for any temperature fluctuations.
How can the OT network architect achieve this goal?
- A. Configure a fuel server on the corporate network, and deploy a FortiSIEM with a single pattern temperature performance rule on the remote network.
- B. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature security rule on the corporate network.
- C. Configure a fuel server on the remote network, and deploy a FortiSIEM with a single pattern temperature performance rule on the corporate network.
- D. Configure both fuel server and FortiSIEM with a single-pattern temperature performance rule on the corporate network.
Answer: C
Explanation:
Explanation
This way, FortiSIEM can discover and monitor everything attached to the remote network and provide security visibility to the corporate network
NEW QUESTION # 31
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use the user self-registration server.
- B. You must use a third-party RADIUS OTP server.
- C. You must register the same FortiToken on more than one FortiGate.
- D. You must use a FortiAuthenticator.
Answer: D
NEW QUESTION # 32
Refer to the exhibit.
An OT architect has implemented a Modbus TCP with a simulation server Conpot to identify and control the Modus traffic in the OT network. The FortiGate-Edge device is configured with a software switch interface ssw-01.
Based on the topology shown in the exhibit, which two statements about the successful simulation of traffic between client and server are true? (Choose two.)
- A. The FortiGate devices is in offline IDS mode.
- B. The FortiGate-Edge device must be in NAT mode.
- C. NAT is disabled in the FortiGate firewall policy from port3 to ssw-01.
- D. Port5 is not a member of the software switch.
Answer: B,C
NEW QUESTION # 33
Which two statements are true when you deploy FortiGate as an offline IDS? (Choose two.)
- A. FortiGate acts as network sensor.
- B. Network attacks can be detected and blocked.
- C. Network traffic goes through FortiGate.
- D. FortiGate receives traffic from configured port mirroring.
Answer: A,C
NEW QUESTION # 34
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for device profiling.
- B. It can be used for IoT device detection.
- C. It can be used for network micro-segmentation.
- D. It can be used for industrial intrusion detection and prevention.
Answer: A,B
Explanation:
Explanation
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 35
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Direct VLAN assignment
- B. Enhanced point of connection details
- C. Adapter consolidation for multi-adapter hosts
- D. Importation and classification of hosts
Answer: B,D
Explanation:
Explanation
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 36
The OT network analyst runs different level of reports to quickly explore threats that exploit the network. Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?
- A. Compliance reports
- B. Threat hunting reports
- C. CMDB reports
- D. OT/loT reports
Answer: B
NEW QUESTION # 37
What triggers Layer 2 polling of infrastructure devices connected in the network?
- A. A matched profiling rule
- B. A matched security policy
- C. A failed Layer 3 poll
- D. A linkup or linkdown trap
Answer: D
NEW QUESTION # 38
......
Study HIGH Quality NSE7_OTS-7.2 Free Study Guides and Exams Tutorials: https://www.dumpstorrent.com/NSE7_OTS-7.2-exam-dumps-torrent.html
Download Fortinet NSE7_OTS-7.2 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=1I21QFz4g4FiGtTRaaZW6zzPtDCaqar_B