[Aug-2024] Citrix 1Y0-241 Test Engine PDF - All Free Dumps from DumpsTorrent
Get New 1Y0-241 Certification – Valid Exam Dumps Questions
NEW QUESTION # 64
Scenario: A Citrix Administrator is running an e-commerce web service that uses backend SQL and RADIUS servers. The e-commerce platform runs on a web server using port 80, and a website status page on port 99 reports the status of all servers.
Which monitor should the administrator choose to confirm the availability of the e-commerce solution?
- A. HTTP on port 99
- B. HTTP-ECV on port 80
- C. HTTP_ECV on port 99
- D. HTTP on port 80
Answer: C
Explanation:
destPort TCP or UDP port to which to send the probe. If the parameter is set to 0, the port number of the service to which the monitor is bound is considered the destination port. For a monitor of type USER, however, the destination port is the port number that is included in the HTTP request sent to the dispatcher. Does not apply to monitors of type PING.
NEW QUESTION # 65
Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold.
How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?
- A. Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.
- B. Configure specific alerts for vServers using Citrix ADM.
- C. Configure TCP Insight on the Citrix ADM.
- D. Configure network reporting on the Citrix ADM by setting the threshold and email address.
Answer: D
Explanation:
https://docs.citrix.com/en-us/citrix-application-delivery-management-service/networks/network-reporting.html
NEW QUESTION # 66
A Citrix Network Engineer informs a Citrix Administrator that a data interface used by Citrix ADC SDX is being saturated.
Which action could the administrator take to address this bandwidth concern?
- A. Add a second interface to each Citrix ADC VPX instance.
- B. Configure LACP on the SDX for the data interface.
- C. Configure LACP on the SDX for management interface.
- D. Configure a failover interface set on each Citrix ADC VPX instance.
Answer: B
Explanation:
Reference:
241_Exam_Preparation_Guide_v01.pdf
NEW QUESTION # 67
Which feature can a Citrix Administrator use to create a consistent set of front-end SSL parameters across multiple SSL vServers?
- A. SSL bridge
- B. SSL profile
- C. SSL policy
- D. SSL multiplexing
- E. SSL policy
Answer: B
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/ssl/ssl-profiles.html
NEW QUESTION # 68
Scenario: A Citrix Administrator needs to configure persistence on a global server load balancing (GSLB) vServer to which a service is bound. Service must continue to handle requests from the client even after it is disabled manually - accepting new requests or connections only to honor persistence. After a configured period of time, no new requests or connections are directed to the service and all existing connections are closed.
To achieve these requirements, which parameter can the administrator configure while disabling the service?
- A. Persistence time-Out
- B. Persistence threshold
- C. Wait time
- D. Request threshold
Answer: C
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/load-balancing/load-balancing-advanced-settings/graceful
NEW QUESTION # 69
Which Citrix ADC Access Control List (ACL) command can a Citrix Administrator use to bridge traffic originating from the IP address 192.168.10.200?
- A. add ns simpleacl
- B. add ns acl6
- C. add ns acl
- D. add ns simpleacl6
Answer: C
Explanation:
Explanation
https://developer-docs.citrix.com/projects/citrix-adc-command-reference/en/latest/ns/ns-acl/
NEW QUESTION # 70
Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.
What can the administrator do to accomplish this?
- A. Connect to a USB port to issue a restart command.
- B. Use the NMI button on the back of the appliance.
- C. Turn off the appliance using the power button.
- D. Use the reset button on the front of the appliance.
Answer: B
Explanation:
Explanation
https://support.citrix.com/article/CTX120660
NEW QUESTION # 71
Scenario: A Citrix Administrator executed the command below in an active-active, global server load balancing (GSLB) setup.
set gslb parameter -ldnsprobeOrder DNS PING TCP
The order to calculate the _____ for dynamic proximity will be the DNS UDP query followed by the ping and then TCP. (Choose the correct option to complete the sentence.)
- A. Time to live (TTL)
- B. Multiple IP responses (MIR)
- C. Empty Domain Service (EDS)
- D. Round-trip time (RTT)
Answer: D
NEW QUESTION # 72
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. a CPU
- B. memory
- C. a physical interface
- D. the kernel
Answer: A,C
Explanation:
On Citrix ADC SDX, instances get dedicated and shared resources: The memory resources are dedicated to an instance. The CPU resources can be dedicated, or shared, depending on the requirements Allocation of the network devices is flexible in Citrix ADC SDX. The devices can be shared or dedicated based on the security or compliance requirements. Each instance gets its own kernel.
NEW QUESTION # 73
Scenario: A Citrix Administrator created and bound multiple content switching policies. During testing, attempts to access https://cs.mycompany.com resulted in the error message below:
HTTP 503 Service Unavailable
In a Citrix ADC configuration, what can the administrator do to fix the error?
- A. Enable the content switching feature
- B. Bind a certificate
- C. Check the priorities of the existing policies
- D. Disable the spillover redirect URL.
Answer: C
Explanation:
Explanation
Client receives a 503 - Service Unavailable response. Resolution Verify the URL and policy bindings. The client receives the 503 response when none of the policies you have configured is evaluated and no default load balancing virtual server is defined and bound to the content switching virtual server.
NEW QUESTION # 74
Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.
What can the administrator do to increase bandwidth on the Citrix ADC?
- A. Add two more 10G Citrix ADC ports to the network and configure VLAN.
- B. Purchase another Citrix ADC MPX appliance.
- C. Plug another 10G Citrix ADC port into the router.
- D. Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).
Answer: D
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/networking/interfaces/configuring-link-aggregation.html
NEW QUESTION # 75
Scenario: A Citrix ADC is configured with Interface 1/1 and bound to VLAN 40. A Citrix Administrator executed the below command:
> bind vlan 10 -ifnum 1/1
What is the result of executing this command on the Citrix ADC?
- A. Interface 1/1 is bound to VLAN 20, and native VLAN is 40.
- B. Interface 1/1 is bound to VLAN 20, and native VLAN is 1.
- C. Interface 1/1 is bound to VLAN 20, and native VLAN is 20.
- D. Interface 1/1 is bound to VLAN 20, and native VLAN is NOT changed.
Answer: C
Explanation:
Explanation
https://www.citrix.com/blogs/2014/12/29/netscaler-vlans-demystified/
https://support.citrix.com/article/CTX115575
NEW QUESTION # 76
The Citrix ADC SDX architecture allows instances to share ___________ and __________. (Choose the two correct options to complete the sentence.)
- A. a CPU
- B. memory
- C. a physical interface
- D. the kernel
Answer: A,B
NEW QUESTION # 77
Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.
The current load-balancing setup on the Citrix ADC is:
One load-balancing vServer with one externally accessible VIP
One service created for each protocol type
One server entity for each backend resource
During business hours, the administrator wants to make changes to one backend server without affecting the other servers.
What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?
- A. Unbind the correct server entity from the load-balancing vServer.
- B. Disable the load-balancing vServer.
- C. Disable the backend service entity targeted for change.
- D. Disable the backend server entity targeted for change.
Answer: D
NEW QUESTION # 78
A Citrix Administrator needs to confirm that all client certificates presented to the authentication vServer are valid until the year 2023.
Which expression can the administrator use to meet this requirement?
- A. CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2023)
- B. CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2023)
- C. CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2023)
- D. CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2023)
Answer: C
Explanation:
Explanation
https://docs.citrix.com/en-us/citrix-adc/current-release/appexpert/policies-and-expressions/adv-policy-exp-worki
NEW QUESTION # 79
Scenario: Users are trying to access https://cs.mycompany.com, but are receiving the error below:
HTTP 503 Service Unavailable
What can a Citrix Administrator change in the Citrix ADC configuration to fix this?
- A. Bind the default load-balancing vServer.
- B. Bind a certificate.
- C. Enable the content switching feature.
- D. Disable the spillover redirect URL.
Answer: A
NEW QUESTION # 80
Scenario: A Citrix Administrator needs to improve website loading speed. End users are reporting slow GIF image rendering speeds as they scroll down a website, which affects overall page load time.
Which Citrix ADC feature can the administrator enable to improve website performance?
- A. Domain sharding
- B. Image lazy loading
- C. Image optimization
- D. Image shrink-to attributes
Answer: C
Explanation:
Reduces the image to the size indicated in the image tag by Citrix ADC, enabling client browsers to load images faster. https://docs.citrix.com/en-us/citrix-adc/current-release/optimization/front-end-optimization.html
NEW QUESTION # 81
How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to 1.0 in every request?
- A. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT - B. >add rewrite action RW_ACT replace http.req.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT - C. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.0\""
> add rewrite policy RW_POL true RW_ACT - D. >add rewrite action RW_ACT replace http.res.version "\"HTTPS/1.1\""
> add rewrite policy RW_POL true RW_ACT
Answer: B
NEW QUESTION # 82
Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment:
set gslb site SiteB -triggerMonitor MEPDOWN
What will be the effect of this command on the default service monitoring behavior on a remote site?
- A. The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.
- B. The service monitor will take precedence over Metric Exchange Protocol (MEP).
- C. The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.
- D. The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).
Answer: C
NEW QUESTION # 83
Scenario: A Citrix Administrator configured a global server load balancing (GSLB) setup for internal and external users using the same host name. For internal users, cvad.citrite.net should go to the Citrix StoreFront site; for external users, it should connect to the Citrix ADC Gateway VPN site.
Which feature should the administrator configure to accomplish this?
- A. DNS View
- B. DNS Proxy
- C. DNS Preferred Location
- D. DNS Record
Answer: A
NEW QUESTION # 84
A Citrix Administrator needs to use a client's IP address as the source IP address for Citrix ADC-to-server connections.
Which Citrix ADC mode can the administrator use to meet this requirement?
- A. Layer 2
- B. Layer 3
- C. USNIP
- D. USIP
Answer: D
Explanation:
Explanation
When you enable the USIP address mode of a NetScaler appliance, the appliance forwards each packet to the appropriate back end server with the client IP address. https://support.citrix.com/article/CTX121974
NEW QUESTION # 85
Which profile can a Citrix Administrator create to configure a default profile that disables TLSv1?
- A. DTLS
- B. TCP
- C. SSL
- D. HTTP
Answer: C
NEW QUESTION # 86
Which two protocols would provide end-to-end data encryption, while allowing a Citrix ADC to optimize the responses? (Choose two.)
- A. SSL protocol for the services
- B. SSL protocol for the vServer
- C. SSL bridge protocol for the vServer
- D. HTTP protocol for the vServer
- E. SSL bridge protocol for the services
- F. HTTP protocol for the services
Answer: A,B
NEW QUESTION # 87
Scenario: A Citrix Administrator configured a responder policy as follows:
> add responder action Picture10Action redirect "\"http://\" + http.req.hostname + http.req.url + \"/picture10.html\"" -bypassSafetyCheck YES
> add responder policy Picture10Policy "http.req.url.eq(\"/mywebsite\")" Picture10Action
> bind responder global Picture10Policy 1 END -type OVERRIDE
What will be the effect of this configuration?
- A. Clients accessing http://www.mywebsite.com/picture10.html will be overwritten with http://www.mywebsite com/.
- B. The file Picture10 will be downloaded to a local drive when directly accessing http://www.mywebsite.com/picture10.html.
- C. Clients accessing http://www.mywebsite.com/ will have /picture10 html appended to the URL.
- D. The URL http://www.mywebsite.com will be overwritten with /picture10.html.
Answer: C
NEW QUESTION # 88
Which two policies can a Citrix Administrator configure using only the advanced policy expression? (Choose two.)
- A. Integrated caching
- B. SSL
- C. System
- D. DNS
Answer: A,D
Explanation:
https://docs.citrix.com/en-us/citrix-adc/12-1/appexpert/policies-and-expressions/ns-pi-intro-pol-exp-wrapper-con/ns-pi-adv-class-pol-con.html
NEW QUESTION # 89
......
100% Passing Guarantee - Brilliant 1Y0-241 Exam Questions PDF: https://www.dumpstorrent.com/1Y0-241-exam-dumps-torrent.html
1Y0-241 Dumps 2024 - NewCitrix Exam Questions: https://drive.google.com/open?id=1wRx4txIr0grpc8AHszsBqSeG5w-5Syj6