2021 Latest Network Appliance NS0-526 Real Exam Dumps PDF
NS0-526 Exam Dumps, NS0-526 Practice Test Questions
NetApp NS0-526 Exam Topics:
| Section | Objectives |
|---|---|
| Implementation Guidelines | -Describe strategies for implementing NetApp data protection products in the data fabric. -Demonstrate how to calculate transfer time based on the customer's available bandwidth or latency distance for NetApp data protection products. -Describe storage efficiency for data protection. -Demonstrate automation policies for managing volume capacity. -Describe monitoring or reporting concepts. |
| Configuring Data Protection Software | -Describe how to configure SnapCenter, Snapshots, SnapMirror policies, or MetroCluster. -Describe which tool to use to set up and manage storage and schedule policies. |
| Operating Data Protection Deployments | -Demonstrate how to back up or restore data. -Demonstrate how to locate or protect unprotected volumes. -Describe how to use orchestratration for failover and failback application servers. -Describe how to monitor primary or secondary storage capacities. -Describe how to use external NetApp or third-party backup and recovery solutions. -Describe how to verify that backup and replication jobs are up-to-date. -Demonstrate how to validate that a backup can be restored. |
| Planning Data Protection Implementation | -Describe data protection solutions. -Demonstrate how to apply guidelines and use NetApp tools. -Describe the implementation steps for application- and virtualization-specific workloads, including Snapshot retention policies. -Demonstrate how to develop a course of action to recover customer data after a disaster. -Describe how to implement security related to data protection. -Describe how to plan for Data Protection in the data fabric. |
| NetApp Replication Technology | -Describe how NetApp replication technology works. -Demonstrate how high-availability configurations work. -Describe the difference between synchronous and asynchronous replication. |
NEW QUESTION 68
Your disaster recovery strategy requires a mirror, an archive, and a tape backup. Which software would you recommend for this scenario?
- A. OnCommand Workflow Automation
- B. OnCommand Unified Manager
- C. OnCommand System Manager
- D. SnapProtect
Answer: D
NEW QUESTION 69
Which command shows a volume's space usage, including metadata, within the aggregate?
- A. volume show-space
- B. volume show-footprint
- C. volume show
- D. aggregate show
Answer: B
NEW QUESTION 70
You want to perform a health check of the MetroCluster synchronization status.
Which two actions should you perform? (Choose two.)
- A. On the cluster shell, use the metrocluster replication show command.
- B. Run the MetroCluster Health Check tool from your administration host.
- C. In On Command System Manager, go to the Cluster in the Metro Cluster section.
- D. In On Command Unified Manager, go to the Cluster in the MetroCluster tab.
- E. On the cluster shell, use the metrocluster check run command.
Answer: A,D
NEW QUESTION 71
Click the Exhibit button.
A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between the production system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.
Referring to the exhibit, in which slot should you install the card?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 72
You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?
- A. Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.
- B. Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.
- C. Expand the source FlexGroup nondisruptively, and update the SnapMirror.
- D. Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.
Answer: A
NEW QUESTION 73
In which two scenarios would a SnapMirror policy be applied? (Choose two.)
- A. a storage virtual machine
- B. a log file
- C. aSnapVault relationship
- D. a data protection mirror relationship
Answer: C,D
NEW QUESTION 74
You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial data. Although the data is critical, it only changes on a monthly basis.
Using On Command System Manager, which two actions would change the frequency of the SnapMirror updates? (Choose two.)
- A. Edit the parameters of the default schedule.
- B. Select or create a different schedule.
- C. Edit the parameters of the default policy.
- D. Select or create a different policy.
Answer: C,D
NEW QUESTION 75
You are performing a routine health check for a customer and need to determine if the disk shelf firmware is up to date.
From My AutoSupport, which report would you use?
- A. Event Viewer
- B. Transition Advisor
- C. Visualization
- D. Upgrade Advisor
Answer: C
NEW QUESTION 76
You are calculating transfer time for SnapMirror replication between two NetApp clusters.
Which three factors should be included in your consideration? (Choose three.)
- A. latency between clusters
- B. TCP window size
- C. data size to transfer
- D. retention policy
- E. SnapMirror schedule
Answer: A,B,C
NEW QUESTION 77
Click the Exhibit button.
A customer wants to have a local mirror and a remote mirror of their data.
Referring to the exhibit, which two solutions satisfy these requirements? (Choose two.)
- A. Solution IV
- B. Solution I
- C. Solution II
- D. Solution III
Answer: A,C
NEW QUESTION 78
You want to conserve disk space in your SnapVault destinations. You enablestorage efficiency on each of the secondary volumes. Which two statements are true in this scenario?
(Choose two.)
Response:
- A. If storage efficiency is enabled on the primary volume, it will be preserved on the secondary volume.
- B. Storage efficiency can be enabled on the secondary volume and SnapVault will manage the schedule.
- C. Storage efficiency can beenabled on the secondary volume, but a manual schedule will need to be assigned.
- D. SnapVault implicitly uses storage efficiency.
Answer: A,B
NEW QUESTION 79
You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection -> Volume Relationships.
In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?
- A. Quiesced
- B. InSync
- C. SnapMirrored
- D. Uninitialized
Answer: B
NEW QUESTION 80
A client has a 2 TB volume and has enabled the function to automatically delete Snapshot copies in scenarios where capacity will be exceeded. They have set the trigger for this action to the volume | snap_reserve value.
In this scenario, what would trigger this function?
- A. The snap_reserve reaches capacity.
- B. The volume reaches 98% and the snap_reserve is at capacity.
- C. The volume reaches 95% and the space_reserve is at capacity.
- D. The volume reaches 95%.
Answer: B
NEW QUESTION 81
Using ONTAP System Manager, you are asked to replicate all the volumes contained in a Storage VM to a remote ONTAP 9.7 system for quick disaster recovery.
Which two steps need to be completed to accomplish this task? (Choose two.)
- A. Create an SVM-DR relationship.
- B. Create a SnapMirror relationship for each volume.
- C. Create an SVM peering relationship.
- D. Create a cluster peering relationship.
Answer: C,D
NEW QUESTION 82
A customer wants to maintain a single copy for both disaster recovery and backup on a secondary system.
Which SnapMirror policy and relationship type should be used?
- A. Mirror And Vault/Relationship Type DP
- B. Mirror And Vault/Relationship Type XDP
- C. Mirror And Vault/Relationship Type TDP
- D. Mirror And Vault/Relationship Type LS
Answer: B
NEW QUESTION 83
Click the Exhibit button.
An employee's computer and mapped home folder has been encrypted with ransomware.
You are asked to restore the data from a SnapVault repository.
Referring to the exhibit, what happens when the volume is restored?
- A. All files in the volume are restored.
- B. The restore is performed locally.
- C. Only files that have changed in the volume are restored.
- D. The original data is decrypted in place.
Answer: A
NEW QUESTION 84
You want to protect a clustered Data ONTAP volume with a SnapMirror relationship. You choose not to initialize the relationship during the Create Mirror Relationship workflow.
In this scenario, which two statements are correct? (Choose two.)
- A. You can only initialize the relationship later from the command line.
- B. You can initialize the relationship later from the protection window in OnCommand System Manager.
- C. The baseline Snapshot copy will not be transferred to the destination system.
- D. The baseline Snapshot copy will not be created on the primary system.
Answer: A,D
NEW QUESTION 85
A customer wants to modify the retentioncount of the SnapVault destination volume. Which policy should be used modify the attribute?
- A. Volume policy
- B. SnapMirror policy
- C. Snapshot policy
- D. Efficiency policy
Answer: B
NEW QUESTION 86
An administrator wants to use SnapCenter 4.1 to back up and restore both their VMware Horizon environment and Microsoft SQL attached database.
In this scenario, which service account role should be configured to accomplish this task?
- A. operator
- B. sysadmin
- C. backup
- D. administrator
Answer: D
NEW QUESTION 87
......
PDF (New 2021) Actual Network Appliance NS0-526 Exam Questions: https://www.dumpstorrent.com/NS0-526-exam-dumps-torrent.html