VMware 5V0-42.21 Premium Exam Engine pdf - Download Free Updated 53 Questions
Verified 5V0-42.21 Bundle Real Exam Dumps PDF
VMware 5V0-42.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 31
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Segments
- B. Business Policy
- C. Firewall
- D. VLANs
Answer: A
NEW QUESTION 32
The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?
- A. VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator
- B. There is impact on data plane when the Edge loses connectivity to the management plane.
Theoperatoronly loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed. - C. To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewallrule, if Edge is deployed behind a Firewall.
- D. Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)
Answer: D
NEW QUESTION 33
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - B. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - C. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- D. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
Answer: C
NEW QUESTION 34
A customer is using VMware SD-WAN and has branches in different continents where the Edges are assigned with local Gateways.
Which Gateway should be used so all the branches can build tunnels with one another?
- A. Alternate Gateway
- B. Regional Gateway
- C. Super Gateway
- D. Primary Gateway
Answer: D
NEW QUESTION 35
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?
- A. Modify the SD WAN Traffic Class and Weight Mapping
- B. Enable the rate limit under a new custom Business Policy Rule.
- C. Change the application priority to low.
- D. Enable the SD-WAN Overlay Rate-Limit.
Answer: C
NEW QUESTION 36
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?
- A. Static mute for gateway IPs on the edge
- B. Default route learned via dynamic routing
- C. Internet reachability via the private WAN
- D. Gateway IPs must be routed in the overlay
Answer: B
NEW QUESTION 37
A customer has a 10,000 branch site requirement arid must use a hub cluster in their design.
Which Mware SO- WAN best practice should be used when designing the cluster?
- A. Static routing
- B. MP BGP south bound
- C. BGP on WAN side
- D. BGP on LAN side
Answer: B
NEW QUESTION 38
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. velocloud
- B. adnim
- C. Password configured in cloud_init
- D. No password required
Answer: C
NEW QUESTION 39
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?
- A. Standard Admin User can view but cannot manage their customer.
- B. Enterprise read only: User can view but not modify configurations.
- C. Customer Support User can view and manage then company's network
- D. Superuser: User can view but cannot create additional admin.
Answer: C
NEW QUESTION 40
Company a has recently acquired Company B, which has two remote office. Company A is using VMware hosted Cloud Gateways, and Company B is using a VMware SD-WAN with a Hub-Spoke topology.
Which VEware Cloud VPN solution an administrator configure to establish connectivity between the offices of Company A and Company B?
- A. Site-to-Site VPN
- B. Branch to Non VMware SU-WAN Site
- C. Branch to Branch VPN
- D. Branch to CASH
Answer: D
NEW QUESTION 41
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Hub
- B. VMware SD-WAN Edge
- C. VMware SD-WAN Controller
- D. VMware SD-WAN Orchestrator
Answer: C
NEW QUESTION 42
A service provider needs to upgrade a gateway to a new software version.
Which step in needed to complete the upgrade process?
- A. Re-assign the Gateway to a new gateway Pool with the appropriate software version, and then run 'sudo apt-get update'' from the Gateway console.
- B. Copy the new image to/var/lib/velocloud/software_update.tar, and then run the upgrade thescript from the console.
- C. Create a new disk partition to save the new software image to, modify the boot order via the Gateway BIOS to boot to the new partition, and then reboot the gateway.
- D. From the Orchestrator, select the check-box next to the appropriate gateway, choose ''Assign Software image", and then select the version for the upgrade.
Answer: C
NEW QUESTION 43
A customer is using hypervisor to install VMware Partner Gateways.
Which two hypervisors may be used? (Choose two.)
- A. Kubermetes
- B. XenServer
- C. ESXi
- D. KVM
- E. Hyper-V
Answer: D,E
NEW QUESTION 44
What is considered a typical VMware SD-WAN use case?
- A. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.
- B. Provide high speed layer 2 data center interconnects.
- C. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options.
- D. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions.
Answer: A
NEW QUESTION 45
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?
- A. SAML 2.0
- B. TACACS+
- C. LDAP
- D. OpenID Connect (OlDC)
Answer: A
NEW QUESTION 46
An enterprise has deployed a VMware SD-WAN solution with Edges in many different located to different Partner Gateways.
Which design makes it possible to have dynamic branch to branch VPN tunnels between any two Edges?
- A. Add Controller role to each Partner Gateway.
- B. Configure each partner Gateway as a Controller.
- C. Dedicate at least one Gateway as a Controller, and no data plan packets will traverse the Controller before dynamic tunnel is established between the two branches.
- D. Dedicated at least one Gateway as a Controller, and few initial data plane packets will travers the Controller before dynamic tunnel is established between the two branches.
Answer: C
NEW QUESTION 47
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- B. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
- C. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- D. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
Answer: D
NEW QUESTION 48
A customer has deployed VMware SD_WAN solution An administrator asked to imported additional security for traffic going to internet without investigating in new hardware solutions.
- A. Service chaining with Zscaler Cloud Security Service
- B. Service chaining with DFW in NSX-V
- C. Service chaining with AWS Cloud Security
- D. Service chaining with DFW in NSX-1
Answer: C
NEW QUESTION 49
Employees with an Apple iOS device have been causing congestion on the company's internet What should an administrator configure to target these devices when creating a Business policy for this issue?
- A. Match Source
- B. Action Network Service
- C. Action Priority
- D. Match Destination
Answer: C
NEW QUESTION 50
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
- B. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
- C. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
- D. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
Answer: B
NEW QUESTION 51
Which role(s) must be enable under Gateway configuration page to allow a VMware SD-WAN Gateway to build IPsec tunnels to non-VM SD-WAN?
- A. Control Plane
- B. Control Plane + Secure VPN Gateway
- C. Control Plane + Data Plane + SecureVPN Gateway
- D. Control Plane + Data Plane + Partner Gateway
Answer: D
NEW QUESTION 52
......
Pass Your VMware Exam with 5V0-42.21 Exam Dumps: https://www.dumpstorrent.com/5V0-42.21-exam-dumps-torrent.html
5V0-42.21 Dumps PDF New [2022] Ultimate Study Guide: https://drive.google.com/open?id=1j3AU8LPzKKuDBzyuypcHBjo-SwBSsC1y